wiki.techinc.nl/tests/phpunit/includes/resourceloader/ResourceLoaderClientHtmlTest.php

406 lines
14 KiB
PHP
Raw Normal View History

resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
<?php
use Wikimedia\TestingAccessWrapper;
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
/**
* @group ResourceLoader
*/
class ResourceLoaderClientHtmlTest extends PHPUnit\Framework\TestCase {
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
use MediaWikiCoversValidator;
protected static function expandVariables( $text ) {
return strtr( $text, [
'{blankVer}' => ResourceLoaderTestCase::BLANK_VERSION
] );
}
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
protected static function makeContext( $extraQuery = [] ) {
$conf = new HashConfig( [
'ResourceLoaderSources' => [],
'ResourceModuleSkinStyles' => [],
'ResourceModules' => [],
'EnableJavaScriptTest' => false,
'ResourceLoaderDebug' => false,
'LoadScript' => '/w/load.php',
] );
return new ResourceLoaderContext(
new ResourceLoader( $conf ),
new FauxRequest( array_merge( [
'lang' => 'nl',
'skin' => 'fallback',
'user' => 'Example',
'target' => 'phpunit',
], $extraQuery ) )
);
}
protected static function makeModule( array $options = [] ) {
return new ResourceLoaderTestModule( $options );
}
protected static function makeSampleModules() {
$modules = [
'test' => [],
'test.private' => [ 'group' => 'private' ],
'test.shouldembed.empty' => [ 'shouldEmbed' => true, 'isKnownEmpty' => true ],
'test.shouldembed' => [ 'shouldEmbed' => true ],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.styles.pure' => [ 'type' => ResourceLoaderModule::LOAD_STYLES ],
'test.styles.mixed' => [],
'test.styles.noscript' => [
'type' => ResourceLoaderModule::LOAD_STYLES,
'group' => 'noscript',
],
'test.styles.user' => [
'type' => ResourceLoaderModule::LOAD_STYLES,
'group' => 'user',
],
'test.styles.user.empty' => [
'type' => ResourceLoaderModule::LOAD_STYLES,
'group' => 'user',
'isKnownEmpty' => true,
],
'test.styles.private' => [
'type' => ResourceLoaderModule::LOAD_STYLES,
'group' => 'private',
'styles' => '.private{}',
],
'test.styles.shouldembed' => [
'type' => ResourceLoaderModule::LOAD_STYLES,
'shouldEmbed' => true,
'styles' => '.shouldembed{}',
],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.scripts' => [],
'test.scripts.user' => [ 'group' => 'user' ],
'test.scripts.user.empty' => [ 'group' => 'user', 'isKnownEmpty' => true ],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.scripts.raw' => [ 'isRaw' => true ],
'test.scripts.shouldembed' => [ 'shouldEmbed' => true ],
'test.ordering.a' => [ 'shouldEmbed' => false ],
'test.ordering.b' => [ 'shouldEmbed' => false ],
'test.ordering.c' => [ 'shouldEmbed' => true, 'styles' => '.orderingC{}' ],
'test.ordering.d' => [ 'shouldEmbed' => true, 'styles' => '.orderingD{}' ],
'test.ordering.e' => [ 'shouldEmbed' => false ],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
];
return array_map( function ( $options ) {
return self::makeModule( $options );
}, $modules );
}
/**
* @covers ResourceLoaderClientHtml::getDocumentAttributes
*/
public function testGetDocumentAttributes() {
$client = new ResourceLoaderClientHtml( self::makeContext() );
$this->assertInternalType( 'array', $client->getDocumentAttributes() );
}
/**
* @covers ResourceLoaderClientHtml::__construct
* @covers ResourceLoaderClientHtml::setModules
* @covers ResourceLoaderClientHtml::setModuleStyles
* @covers ResourceLoaderClientHtml::setModuleScripts
* @covers ResourceLoaderClientHtml::getData
* @covers ResourceLoaderClientHtml::getContext
*/
public function testGetData() {
$context = self::makeContext();
$context->getResourceLoader()->register( self::makeSampleModules() );
$client = new ResourceLoaderClientHtml( $context );
$client->setModules( [
'test',
'test.private',
'test.shouldembed.empty',
'test.shouldembed',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.unregistered',
] );
$client->setModuleStyles( [
'test.styles.mixed',
'test.styles.user.empty',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.styles.private',
'test.styles.pure',
'test.styles.shouldembed',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.unregistered.styles',
] );
$client->setModuleScripts( [
'test.scripts',
'test.scripts.user',
'test.scripts.user.empty',
'test.scripts.shouldembed',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.unregistered.scripts',
] );
$expected = [
'states' => [
'test.private' => 'loading',
'test.shouldembed.empty' => 'ready',
'test.shouldembed' => 'loading',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.styles.pure' => 'ready',
'test.styles.user.empty' => 'ready',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.styles.private' => 'ready',
'test.styles.shouldembed' => 'ready',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'test.scripts' => 'loading',
'test.scripts.user' => 'loading',
'test.scripts.user.empty' => 'ready',
'test.scripts.shouldembed' => 'loading',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
],
'general' => [
'test',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
],
'styles' => [
'test.styles.pure',
],
'scripts' => [
'test.scripts',
'test.scripts.user',
'test.scripts.shouldembed',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
],
'embed' => [
'styles' => [ 'test.styles.private', 'test.styles.shouldembed' ],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'general' => [
'test.private',
'test.shouldembed',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
],
],
];
$access = TestingAccessWrapper::newFromObject( $client );
$this->assertEquals( $expected, $access->getData() );
}
/**
* @covers ResourceLoaderClientHtml::setConfig
* @covers ResourceLoaderClientHtml::setExemptStates
* @covers ResourceLoaderClientHtml::getHeadHtml
* @covers ResourceLoaderClientHtml::getLoad
* @covers ResourceLoader::makeLoaderStateScript
*/
public function testGetHeadHtml() {
$context = self::makeContext();
$context->getResourceLoader()->register( self::makeSampleModules() );
$client = new ResourceLoaderClientHtml( $context );
$client->setConfig( [ 'key' => 'value' ] );
$client->setModules( [
'test',
'test.private',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
] );
$client->setModuleStyles( [
'test.styles.pure',
'test.styles.private',
] );
$client->setModuleScripts( [
'test.scripts',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
] );
$client->setExemptStates( [
'test.exempt' => 'ready',
] );
// phpcs:disable Generic.Files.LineLength
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
$expected = '<script>document.documentElement.className = document.documentElement.className.replace( /(^|\s)client-nojs(\s|$)/, "$1client-js$2" );</script>' . "\n"
. '<script>(window.RLQ=window.RLQ||[]).push(function(){'
. 'mw.config.set({"key":"value"});'
. 'mw.loader.state({"test.exempt":"ready","test.private":"loading","test.styles.pure":"ready","test.styles.private":"ready","test.scripts":"loading"});'
. 'mw.loader.implement("test.private@{blankVer}",function($,jQuery,require,module){},{"css":[]});'
. 'mw.loader.load(["test"]);'
. 'mw.loader.load("/w/load.php?debug=false\u0026lang=nl\u0026modules=test.scripts\u0026only=scripts\u0026skin=fallback");'
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
. '});</script>' . "\n"
. '<link rel="stylesheet" href="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.styles.pure&amp;only=styles&amp;skin=fallback"/>' . "\n"
. '<style>.private{}</style>' . "\n"
. '<script async="" src="/w/load.php?debug=false&amp;lang=nl&amp;modules=startup&amp;only=scripts&amp;skin=fallback"></script>';
// phpcs:enable
$expected = self::expandVariables( $expected );
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
$this->assertEquals( $expected, $client->getHeadHtml() );
}
/**
* Confirm that 'target' is passed down to the startup module's load url.
*
* @covers ResourceLoaderClientHtml::getHeadHtml
*/
public function testGetHeadHtmlWithTarget() {
$client = new ResourceLoaderClientHtml(
self::makeContext(),
[ 'target' => 'example' ]
);
// phpcs:disable Generic.Files.LineLength
$expected = '<script>document.documentElement.className = document.documentElement.className.replace( /(^|\s)client-nojs(\s|$)/, "$1client-js$2" );</script>' . "\n"
. '<script async="" src="/w/load.php?debug=false&amp;lang=nl&amp;modules=startup&amp;only=scripts&amp;skin=fallback&amp;target=example"></script>';
// phpcs:enable
$this->assertEquals( $expected, $client->getHeadHtml() );
}
/**
* Confirm that a null 'target' is the same as no target.
*
* @covers ResourceLoaderClientHtml::getHeadHtml
*/
public function testGetHeadHtmlWithNullTarget() {
$client = new ResourceLoaderClientHtml(
self::makeContext(),
[ 'target' => null ]
);
// phpcs:disable Generic.Files.LineLength
$expected = '<script>document.documentElement.className = document.documentElement.className.replace( /(^|\s)client-nojs(\s|$)/, "$1client-js$2" );</script>' . "\n"
. '<script async="" src="/w/load.php?debug=false&amp;lang=nl&amp;modules=startup&amp;only=scripts&amp;skin=fallback"></script>';
// phpcs:enable
$this->assertEquals( $expected, $client->getHeadHtml() );
}
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
/**
* @covers ResourceLoaderClientHtml::getBodyHtml
* @covers ResourceLoaderClientHtml::getLoad
*/
public function testGetBodyHtml() {
$context = self::makeContext();
$context->getResourceLoader()->register( self::makeSampleModules() );
$client = new ResourceLoaderClientHtml( $context );
$client->setConfig( [ 'key' => 'value' ] );
$client->setModules( [
'test',
'test.private.bottom',
] );
$client->setModuleScripts( [
'test.scripts',
] );
$expected = '';
$expected = self::expandVariables( $expected );
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
$this->assertEquals( $expected, $client->getBodyHtml() );
}
public static function provideMakeLoad() {
// phpcs:disable Generic.Files.LineLength
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
return [
[
'context' => [],
'modules' => [ 'test.unknown' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' => '',
],
[
'context' => [],
'modules' => [ 'test.styles.private' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' => '<style>.private{}</style>',
],
[
'context' => [],
'modules' => [ 'test.private' ],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'only' => ResourceLoaderModule::TYPE_COMBINED,
'output' => '<script>(window.RLQ=window.RLQ||[]).push(function(){mw.loader.implement("test.private@{blankVer}",function($,jQuery,require,module){},{"css":[]});});</script>',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
],
[
'context' => [],
// Eg. startup module
'modules' => [ 'test.scripts.raw' ],
'only' => ResourceLoaderModule::TYPE_SCRIPTS,
'output' => '<script async="" src="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.scripts.raw&amp;only=scripts&amp;skin=fallback"></script>',
],
[
'context' => [ 'sync' => true ],
'modules' => [ 'test.scripts.raw' ],
'only' => ResourceLoaderModule::TYPE_SCRIPTS,
'output' => '<script src="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.scripts.raw&amp;only=scripts&amp;skin=fallback&amp;sync=1"></script>',
],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
[
'context' => [],
'modules' => [ 'test.scripts.user' ],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
'only' => ResourceLoaderModule::TYPE_SCRIPTS,
'output' => '<script>(window.RLQ=window.RLQ||[]).push(function(){mw.loader.load("/w/load.php?debug=false\u0026lang=nl\u0026modules=test.scripts.user\u0026only=scripts\u0026skin=fallback\u0026user=Example\u0026version=0a56zyi");});</script>',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
],
[
'context' => [ 'debug' => true ],
'modules' => [ 'test.styles.pure', 'test.styles.mixed' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' => '<link rel="stylesheet" href="/w/load.php?debug=true&amp;lang=nl&amp;modules=test.styles.mixed&amp;only=styles&amp;skin=fallback"/>' . "\n"
. '<link rel="stylesheet" href="/w/load.php?debug=true&amp;lang=nl&amp;modules=test.styles.pure&amp;only=styles&amp;skin=fallback"/>',
],
[
'context' => [ 'debug' => false ],
'modules' => [ 'test.styles.pure', 'test.styles.mixed' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' => '<link rel="stylesheet" href="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.styles.mixed%2Cpure&amp;only=styles&amp;skin=fallback"/>',
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
],
[
'context' => [],
'modules' => [ 'test.styles.noscript' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' => '<noscript><link rel="stylesheet" href="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.styles.noscript&amp;only=styles&amp;skin=fallback"/></noscript>',
],
[
'context' => [],
'modules' => [ 'test.shouldembed' ],
'only' => ResourceLoaderModule::TYPE_COMBINED,
'output' => '<script>(window.RLQ=window.RLQ||[]).push(function(){mw.loader.implement("test.shouldembed@09p30q0",function($,jQuery,require,module){},{"css":[]});});</script>',
],
[
'context' => [],
'modules' => [ 'test.styles.shouldembed' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' => '<style>.shouldembed{}</style>',
],
[
'context' => [],
'modules' => [ 'test.scripts.shouldembed' ],
'only' => ResourceLoaderModule::TYPE_SCRIPTS,
'output' => '<script>(window.RLQ=window.RLQ||[]).push(function(){mw.loader.state({"test.scripts.shouldembed":"ready"});});</script>',
],
[
'context' => [],
'modules' => [ 'test', 'test.shouldembed' ],
'only' => ResourceLoaderModule::TYPE_COMBINED,
'output' => '<script>(window.RLQ=window.RLQ||[]).push(function(){mw.loader.load("/w/load.php?debug=false\u0026lang=nl\u0026modules=test\u0026skin=fallback");mw.loader.implement("test.shouldembed@09p30q0",function($,jQuery,require,module){},{"css":[]});});</script>',
],
[
'context' => [],
'modules' => [ 'test.styles.pure', 'test.styles.shouldembed' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' =>
'<link rel="stylesheet" href="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.styles.pure&amp;only=styles&amp;skin=fallback"/>' . "\n"
. '<style>.shouldembed{}</style>'
],
[
'context' => [],
'modules' => [ 'test.ordering.a', 'test.ordering.e', 'test.ordering.b', 'test.ordering.d', 'test.ordering.c' ],
'only' => ResourceLoaderModule::TYPE_STYLES,
'output' =>
'<link rel="stylesheet" href="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.ordering.a%2Cb&amp;only=styles&amp;skin=fallback"/>' . "\n"
. '<style>.orderingC{}.orderingD{}</style>' . "\n"
. '<link rel="stylesheet" href="/w/load.php?debug=false&amp;lang=nl&amp;modules=test.ordering.e&amp;only=styles&amp;skin=fallback"/>'
],
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
];
// phpcs:enable
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
}
/**
* @dataProvider provideMakeLoad
* @covers ResourceLoaderClientHtml::makeLoad
* @covers ResourceLoaderClientHtml::makeContext
* @covers ResourceLoader::makeModuleResponse
* @covers ResourceLoaderModule::getModuleContent
* @covers ResourceLoader::getCombinedVersion
* @covers ResourceLoader::createLoaderURL
* @covers ResourceLoader::createLoaderQuery
* @covers ResourceLoader::makeLoaderQuery
* @covers ResourceLoader::makeInlineScript
*/
public function testMakeLoad( array $extraQuery, array $modules, $type, $expected ) {
$context = self::makeContext( $extraQuery );
$context->getResourceLoader()->register( self::makeSampleModules() );
$actual = ResourceLoaderClientHtml::makeLoad( $context, $modules, $type, $extraQuery );
$expected = self::expandVariables( $expected );
resourceloader: Move queue formatting out of OutputPage HTML formatting of the queue was distributed over several OutputPage methods. Each method demanding a snippet of HTML by calling makeResourceLoaderLink() with a limited amount of information. As such, makeResourceLoaderLink() was unable to provide the client with the proper state information. Centralising it also allows it to better reduce duplication in HTML output and maintain a more accurate state. Problems fixed by centralising: 1. The 'user' module is special (due to per-user 'version' and 'user' params). It is manually requested via script-src. To avoid a separate (and wrong) request from something that requires it, we set state=loading directly. However, because the module is in the bottom, the old HTML formatter could only put state=loading in the bottom also. This sometimes caused a wrong request to be fired for modules=user if something in the top queue triggered a requirement for it. 2. Since a464d1d4 (T87871) we track states of page-style modules, with purpose of allowing dependencies on style modules without risking duplicate loading on pages where the styles are loaded already. This didn't work, because the state information about page-style modules is output near the stylesheet, which is after the script tag with mw.loader.load(). That runs first, and mw.loader would still make a duplicate request before it learns the state. Changes: * Document reasons for style/script tag order in getHeadHtml (per 09537e83). * Pass $type from getModuleStyles() to getAllowedModules(). This wasn't needed before since a duplicate check in makeResourceLoaderLink() verified the origin a second time. * Declare explicit position 'top' on 'user.options' and 'user.tokens' module. Previously, OutputPage hardcoded them in the top. The new formatter doesn't. * Remove getHeadScripts(). * Remove getInlineHeadScripts(). * Remove getExternalHeadScripts(). * Remove buildCssLinks(). * Remove getScriptsForBottomQueue(). * Change where Skin::setupSkinUserCss() is called. This methods lets the skin add modules to the queue. Previously it was called from buildCssLinks(), via headElement(), via prepareQuickTemplate(), via OutputPage::output(). It's now in OutputPage::output() directly (slightly earlier). This is needed because prepareQuickTemplate() calls bottomScripts() before headElement(). And bottomScript() would lazy-initialise the queue and lock it before setupSkinUserCss() is called from headElement(). This makes execution order more predictable instead of being dependent on the arbitrary order of data extraction in prepareQuickTemplate (which varies from one skin to another). * Compute isUserModulePreview() and isKnownEmpty() for the 'user' module early on so. This avoids wrongful loading and fixes problem 1. Effective changes in output: * mw.loader.state() is now before mw.loader.load(). This fixes problem 2. * mw.loader.state() now sets 'user.options' and 'user.tokens' to "loading". * mw.loader.state() now sets 'user' (as "loading" or "ready"). Fixes problem 1. * The <script async src> tag for 'startup' changed position (slightly). Previously it was after all inline scripts and stylesheets. It's still after all inline scripts and after most stylesheets, but before any user styles. Since the queue is now formatted outside OutputPage, it can't inject the meta-ResourceLoaderDynamicStyles tag and user-stylesheet hack in the middle of existing output. This shouldn't have any noticable impact. Bug: T87871 Change-Id: I605b8cd1e1fc009b4662a0edbc54d09dd65ee1df
2016-07-15 14:13:09 +00:00
$this->assertEquals( $expected, (string)$actual );
}
}