This may seem a bit weird but anything else related to actor is already
under user/ including ActorCache, ActorNormalization, ActorStore and
ActorStoreFactory.
Bug: T321882
Change-Id: I7072b374bba7a0cd9d905e399c822bf30bd5c0d8
When using the 'userids' or 'user' parameters, $this->orderBy would
previously be set to (respectively) 'id' or 'name'.
This was confusing, because:
* If more than 1 user ID/name was requested, it was immediately
overwritten to 'actor' by the code below.
* If only 1 user ID/name was requested, it was not used for building
either the continuation string or the database query.
Set it to 'actor', and remove code generating and parsing the unused
continuation modes (note that 'name' is still used with other
parameters). Also rename a variable called `$fromName` that actually
always contained an actor ID and not a user name (resolving a FIXME).
Follow-up to c29909e59f, which removed
the code paths that used 'id' or 'name' continuation modes for paging
by user_id and user_name.
Change-Id: I9570292beaa7dca0dbc165ab319b9eef42712efa
30+ API modules had nearly identical code to split and validate
the value of the 'continue' parameter.
Introduce the ApiBase::parseContinueParamOrDie() method and use it to
replace most usages of ApiBase::dieContinueUsageIf(). A few remain in
modules with more complex continuation handling.
Inline most single-use variables that remained after validation was
moved into the new method.
Change-Id: I66bd59ecd4ad16e2039e90f7d66cfa276e6c1c2a
See ec79aa3943 about the new method.
These changes all follow the same simple patterns. More complex cases
are handled in I6231b6beae13474d4986929367a9adc6bb76b0db.
This commit was created by running the following terrible Ruby script
I devised: https://phabricator.wikimedia.org/P34833, then manually
reviewing the results: checking that the output makes sense in general,
that the affected variables are not used elsewhere in the file, and
that no comparison conditions have been lost. A few incorrect changes
were undone or corrected.
Change-Id: I8ed363bd6b80a9481d44434a526f078cce20220f
The variables are set conditional later, but all condition branches set
it or the variable is not used outside that scope
Change-Id: Ic9612915db507028ad4733a061d3ce9be3babfb6
Do the same forcing as already done in Special:Contribs
(from bac54c2 and 9c09511)
The default query for list=usercontribs&ucuser=*&ucnamespace=* for a
namespace with a small number of edits shows filesorting under EXPLAIN
Bug: T307815
Change-Id: I2c8577b0711f6cd19fd062dd19c7263338ab923d
This works by using the ip_changes table.
`iprange` parameter is introduced in order to restrict input to only one range.
Result is sorted by name, timestamp similar to `userprefix` parameter,
and T180153 (sort by timestamp first) is not addressed.
Related messages and test cases are added.
Bug: T177150
Change-Id: I3b8a917aaa76e18decf85b621dc77799698e4a77
This covers all occurrences of /onfig->.*get( '/ in includes/.
Undoubtedly there are still plenty more to go.
Change-Id: I33196c4153437778496f40436bcde399638ac361
Make phan stricter about conditional variable declaration
Remaining false positive issues are suppressed.
The suppression and the setting change can only be done together
Bug: T259172
Change-Id: I1f200ac37df7448453688bf464a8250c97313e5d
These special pages and their counter-part APIs are:
- Special:RecentChanges
- Special:Watchlist
- Special:Log
- Special:Contributions
This also changes the way MAX_EXECUTION_TIME works from taking the value
as milliseconds, it takes seconds which is more intuitive for users.
Bug: T297708
Depends-On: I126e7181422d8da1a63afc3717faa4f72a687dd9
Change-Id: I3ff78751c3df3b6342f1865d35c2075f4415185d
The database result is always a string, cast to int before passing to
getRevisionSizes, which is documented to take int[]
Change-Id: Iead5787a596e0264b769a97f1c79c1abe5c482f4
Introduce a new schema migration stage in which rev_actor is used
directly and the revision_actor_temp table is no longer needed. This
becomes the new "new" stage whereas the previous situation is now
termed SCHEMA_COMPAT_TEMP.
Introduce migrateRevisionActorTemp which copies data from
revision_actor_temp to rev_actor. The code is similar to
migrateImageCommentTemp.php except that it doesn't delete from the old
table.
Partial revert of c29909e59f. That change removed direct
references to $wgActorTableSchemaMigrationStage and made queries
involving revision_actor_temp be unconditional. Such changes need to be
reverted to make the use of revision_actor_temp be conditional again.
In ActorMigrationTest, I compacted provideGetJoin() and
provideGetWhere(), removing most of the duplication between expected
values. I gave all the stages a short name, and mostly used the name in
providers.
Bug: T275246
Change-Id: I7498107dd6433ab7de5bf2e7b3fe2aa5e10e345d
array_fill_keys() was introduced in PHP 5.2.0 and works like
array_flip() except that it does only one thing (copying keys) instead
of two things (copying keys and values). That makes it faster and more
obvious.
When array_flip() calls were paired, I left them as is, because that
pattern is too cute. I couldn't kill something so cute.
Sometimes it was hard to figure out whether the values in array_flip()
result were used. That's the point of this change. If you use
array_fill_keys(), the intention is obvious.
Change-Id: If8d340a8bc816a15afec37e64f00106ae45e10ed
This reverts commit ecf826a2ee.
Reason for revert: need to edit the patch and then it will be GTG in order to finish hard deprecating of User ::getCanonicalName, ::isUsableName, ::isCreatableName
Change-Id: I2f57f56728fcbeada96dc2228f07dc8bcaa5d4f6
There's still room for improvement - batching users by prefix
can be abstracted into the UserSelectQueryBuilder, but I'll do that
separately. It still references actor_id, but that's because
we still have to explicitly query rev_user_temp, and different
paging will mess up the continuation. After completing actor
migration I think we can order the results differently.
Change-Id: I75ff6081f8ecb9fd0dcdd7bbd8b0c974ae71101c
Replaces calls directly to PermissionManager with calls to
the Authority object available from Context or the
GroupPermissionLookup service.
This patch does not address use of PermissionManager for
blocks.
Deprecations:
- ApiBase::checkUserRightsAny deprecated passing optional
User parameter
- ApiBase::checkTitleUserPermissions deprecated passing
LinkTarget as first parameter, takes PageIdentity instead
Bug: T271462
Bug: T271854
Change-Id: I5d7cac1c28a37e074750c46cda03283980a07fca
As well hard-deprecate RevisionStore::listRevisionSizes.
It was marked as @deprecated, but the release for the
deprecation was not specified. Let's say it's 1.35.
Additionally, in order to avoid temporary code duplication,
listRevisionSizes now uses getRevisionSizes and ignores the
database object injected into it. This is ok since we're
hard-deprecating the method and all the usages have been
removed.
Bug: T246284
Change-Id: Ifad1c25a0af892b88fce492b2d34c8cf71279b70
Notably:
* In ApiManageTags, I used a switch instead of a dynamic function name,
so that the call graph will be correct.
* In ApiImageRotate, checkTitleUserPermissions() has always returned
void, this was an error introduced in 4e6810e4a2
Change-Id: Iea22616b8e7e2e0cc804619a54f8690898b2cb82
This brings significant modularization to the Action API's parameter
validation, and allows the Action API and MW REST API to share
validation code.
Note there are several changes in this patch that may affect other code;
see the entries in RELEASE-NOTES-1.35 for details.
Bug: T142080
Bug: T232672
Bug: T21195
Bug: T34675
Bug: T154774
Change-Id: I1462edc1701278760fa695308007006868b249fc
Depends-On: I10011be060fe6d27c7527312ad41218786b3f40d
Until I70473280, integer literals were always quoted as strings, because
the databases we support all have no problem with casting
string-literals for comparisons and such.
But it turned out that gave MySQL/MariaDB's planner problems in some
queries, so we changed it to not quote actual PHP integers.
But then we run into the fact that PHP associative arrays don't preserve
the types of keys, it converts integer-like strings into actual
integers. And when those are passed to the DB unquoted for comparison
with a string-typed column, MySQL/MariaDB screws up the comparison while
PostgreSQL simply throws an error. Sigh.
So ensure the user names passed to the database are actually strings.
Bug: T240808
Change-Id: If2bca6ab9faa5b50516e47f06b0b26b3648e4cbf
In several places, we're including rc_timestamp or other fields in a
query selecting on rc_this_oldid because there was historically no index
on the column.
The needed index was created by I0ccfd26d and deployed by T202167, so
let's remove the hacks.
Bug: T139012
Bug: T239772
Change-Id: Ic99760075bde6603c9f2ab3ee262f5a2878205c7
When converting a Title object into a string for user or user talk
namespace the gender information are needed.
This patch set improves performance on wikis with gender distinction
like dewiki or ruwiki by combining the fetch of the information into one
query and avoids a query per unique user name.
It also avoids false results for request with apihighlimit, because the
apihighlimit with 5000 is higher than the query max limit of the
GenderCache with 1000
Bug: T200238
Change-Id: Ibe0561b210dbeb654117dad777e839640f51b4e4
This removes most of the pre-actor user and user_text columns, and the
$wgActorTableSchemaMigrationStage setting that used to determine
whether the columns were used.
rev_user and rev_user_text remain in the code, as on Wikimedia wikis the
revision table is too large to alter at this time. A future change will
combine that with the removal of rev_comment, rev_content_model, and
rev_content_format (and the addition of rev_comment_id and rev_actor).
ActorMigration's constructor continues to take a $stage parameter, and
continues to have the logic for handling it, for the benefit of
extensions that might need their own migration process. Code using
ActorMigration for accessing the core fields should be updated to use
the new actor fields directly. That will be done for in a followup.
Bug: T188327
Change-Id: Id35544b879af1cd708f3efd303fce8d9a1b9eb02
For some unknown reason, when the `actor` table has few enough rows (or
few enough compared to `revision_actor_temp`) MariaDB 10.1.37 decides it
makes more sense to fetch everything from `actor` + `revision_actor_temp`
and filesort rather than fetching the limited number of rows from
`revision_actor_temp`.
We can work around it by telling it to not reorder the query, but then
(unlike in I9da981c0) we also have to reorder it ourselves to put
`revision_actor_temp` first instead of `revision`.
Bug: T221511
Change-Id: Ic63875b26a051a2da58374d5d76c95a6fa8ecc8e
Remove many references to database fields rev_text_id and ar_text_id,
which are being retired as part of MCR Schema Migration.
Some references remain, and will be removed under other patchsets
or other tasks.
Bug: T198341
Change-Id: Id044b8dcd7c9d09d5d6037eb732f6a105933f516
