Ended up using
grep -Prl '\->setMethods\(' . | xargs sed -r -i 's/setMethods\(/onlyMethods\(/g'
special-casing setMethods( null ) -> onlyMethods( [] )
and then manual fix of failing test (from PS2 onwards).
Bug: T278010
Change-Id: I012dca7ae774bb430c1c44d50991ba0b633353f1
* parent::setUp() should be first, and ::tearDown()
should be last
* Move tests that directly extend PHPUnit\Framework\TestCase
to /unit
Change-Id: I1172855c58f4f52a8f624e6d596ec43beb8c93ff
The name change happened some time ago, and I think its
about time to start using the name name!
(Done with a find and replace)
My personal motivation for doing this is that I have started
trying out vscode as an IDE for mediawiki development, and
right now it doesn't appear to handle php aliases very well
or at all.
Change-Id: I412235d91ae26e4c1c6a62e0dbb7e7cf3c5ed4a6
Migrate all callers of Hooks::run() to use the new
HookContainer/HookRunner system.
General principles:
* Use DI if it is already used. We're not changing the way state is
managed in this patch.
* HookContainer is always injected, not HookRunner. HookContainer
is a service, it's a more generic interface, it is the only
thing that provides isRegistered() which is needed in some cases,
and a HookRunner can be efficiently constructed from it
(confirmed by benchmark). Because HookContainer is needed
for object construction, it is also needed by all factories.
* "Ask your friendly local base class". Big hierarchies like
SpecialPage and ApiBase have getHookContainer() and getHookRunner()
methods in the base class, and classes that extend that base class
are not expected to know or care where the base class gets its
HookContainer from.
* ProtectedHookAccessorTrait provides protected getHookContainer() and
getHookRunner() methods, getting them from the global service
container. The point of this is to ease migration to DI by ensuring
that call sites ask their local friendly base class rather than
getting a HookRunner from the service container directly.
* Private $this->hookRunner. In some smaller classes where accessor
methods did not seem warranted, there is a private HookRunner property
which is accessed directly. Very rarely (two cases), there is a
protected property, for consistency with code that conventionally
assumes protected=private, but in cases where the class might actually
be overridden, a protected accessor is preferred over a protected
property.
* The last resort: Hooks::runner(). Mostly for static, file-scope and
global code. In a few cases it was used for objects with broken
construction schemes, out of horror or laziness.
Constructors with new required arguments:
* AuthManager
* BadFileLookup
* BlockManager
* ClassicInterwikiLookup
* ContentHandlerFactory
* ContentSecurityPolicy
* DefaultOptionsManager
* DerivedPageDataUpdater
* FullSearchResultWidget
* HtmlCacheUpdater
* LanguageFactory
* LanguageNameUtils
* LinkRenderer
* LinkRendererFactory
* LocalisationCache
* MagicWordFactory
* MessageCache
* NamespaceInfo
* PageEditStash
* PageHandlerFactory
* PageUpdater
* ParserFactory
* PermissionManager
* RevisionStore
* RevisionStoreFactory
* SearchEngineConfig
* SearchEngineFactory
* SearchFormWidget
* SearchNearMatcher
* SessionBackend
* SpecialPageFactory
* UserNameUtils
* UserOptionsManager
* WatchedItemQueryService
* WatchedItemStore
Constructors with new optional arguments:
* DefaultPreferencesFactory
* Language
* LinkHolderArray
* MovePage
* Parser
* ParserCache
* PasswordReset
* Router
setHookContainer() now required after construction:
* AuthenticationProvider
* ResourceLoaderModule
* SearchEngine
Change-Id: Id442b0dbe43aba84bd5cf801d86dedc768b082c7
All services required by LinkBatch are now injected by the
LinkBatchFactory. The constructor for LinkBatch has been
soft-deprecated, but the required services are still optional.
Bug: T239855
Depends-On: If49cbb730d4ac48586b891908cf24601efbc5d6a
Change-Id: I93d931ab60305ad49a6e419f8269c77791a3938d
This updates some code that has been constructing TitleValue directly
to use TitleValue::tryNew or TitleParser::makeTitleValueSafe.
Bug: T200055
Change-Id: If781fe62213413c8fb847fd9e90f079e2f9ffc9d
Add public, protected or private to function missing a visibility
Enable the tests folder for the phpcs sniff
Change-Id: Ibefce76ea9984c47e08c94889ea2eafca7565e2c
These are static methods that have to do with processing language names
and codes. I didn't include fallback behavior, because that would mean a
circular dependency with LocalisationCache.
In the new class, I renamed AS_AUTONYMS to AUTONYMS, and added a class
constant DEFINED for 'mw' to match the existing SUPPORTED and ALL. I
also renamed fetchLanguageName(s) to getLanguageName(s).
There is 100% test coverage for the code in the new class.
This was previously committed as 2e52f48c2e and reverted because it
depended on e4468a1d6b, which had to be reverted for performance
issues. There should be no changes other than rebasing.
Bug: T201405
Change-Id: Ifa346c8a92bf1eb57dc5e79458b32b7b26f1ee8a
This removes Language::$dataCache without deprecation, because 1) I
don't know of a way to properly simulate it in the new paradigm, and 2)
I found no direct access to the member outside of the Language and
LanguageTest classes.
An earlier version of this patch (e4468a1d6b) had to be reverted
because of a massive slowdown on test runs. Based on some local testing,
this should fix the problem. Running all tests in languages is slowed
down by only around 20% instead of a factor of five, and memory usage is
actually reduced greatly (~350 MB -> ~200 MB). The slowdown is still not
great, but I assume it's par for the course for converting things to
services and is acceptable. If not, I can try to optimize further.
Bug: T231220
Bug: T231198
Bug: T231200
Bug: T201405
Change-Id: Ieadbd820379a006d8ad2d2e4a1e96241e172ec5a
assertSame() is guaranteed to not do any type conversion. This can be
critical when acciden tially comparing, for example, 0 to 0.0.
Change-Id: Iffcc9bda69573623ba14af655dcd697d0fcce525
These are static methods that have to do with processing language names
and codes. I didn't include fallback behavior, because that would mean a
circular dependency with LocalisationCache.
In the new class, I renamed AS_AUTONYMS to AUTONYMS, and added a class
constant DEFINED for 'mw' to match the existing SUPPORTED and ALL. I
also renamed fetchLanguageName(s) to getLanguageName(s).
There is 100% test coverage for the code in the new class.
Change-Id: I245ae94bfc1f62b6af75ea57525139adf2539fe6
This removes Language::$dataCache without deprecation, because 1) I
don't know of a way to properly simulate it in the new paradigm, and 2)
I found no direct access to the member outside of the Language and
LanguageTest classes.
Change-Id: Iaa86c48e7434f081a53f5bae8723c37c5a34f503
The way isMainCacheable() was used, it always returned false in
non-content languages, because it would try to find strings like
'hidetoc/fr' in the array of message keys (which contains strings like
'hidetoc').
The consequence of this was that MessageCache would check the database
for a MediaWiki:hidetoc/fr page even if it already knew that that page
didn't exist. This is a substantial performance hit when requesting lots
of messages, like when building version hashes for ResourceLoader's
startup module.
Follows-up 4fc5ba8bf8.
Bug: T228555
Change-Id: I20433175ca919acc1c995f4a9cd50ca53afcdd02
Probably good to start testing this in CI sometime soon.
The unit tests being changed here are:
* Hacky importing of a revision in MessageCacheTest, changed to use an
interwiki username.
* WikiPageDbTestBase will get null rather than 0 for ar_user.
* DumpTestCase was using a custom IP $wgUser when creating its test
revisions, which was winding up referring to an actor_id that had been
deleted from the database. Fixed by having it use a registered user
instead.
Also this has MediaWikiTestCase reset the $wgUser User object when the
actor table is truncated, as various tests were otherwise failing because
it was caching a later-deleted actor ID for User:127.0.0.1.
Bug: T188327
Change-Id: Ic483d0fda931810ac639b9de1cc5e5a4ef8161cc
Depends-On: I1bd0288cc132627d75b4001219522ec5e952eda7
This re-enables the "flaky" testLoadFromDB_fetchLatestRevision which
was disabled because it failed on random patches for no apparent
reason, as documented in T219042.
The reason was an invalid timestamp in the test data, which caused
the timestamp to default to "now", which was "sometimes" newer than
the timestamp of the revision immediately created before.
Bug: T219042
Bug: T218918
Change-Id: I38f4816b2dc735a7698626c7e3fe4a93ec95a9d1
In Id044b8dcd7c, we lost a condition that ensured that the cache would
be populated with the latest revision. Now it was being populated with
all revisions, with a random one winning.
Bug: T218918
Change-Id: I1a47356ea35f0abf35bb1a3489d0d3442a3400a5
Follow up to a3d6c1411d.
This avoids extra queries for messages that have a software defined value.
Bug: T193271
Change-Id: I25aa0e27200a0b417721cf1fbd34a82095405b89
Prior to I462554b30, MessageCache::replace() did just that: it took the
existing cache and updated the one entry.
In I462554b30, the rearrangement of work into a DeferredUpdate
introduced a bug: the in-process cache was updated, but when the shared
cache was loaded later the entry was never updated in there so the
shared caches kept the old value. This was found in code review and
worked around by reloading all the messages from the database instead of
updating the existing cache.
But all that extra work reloading everything from the database causes
major slowness saving any MediaWiki-namespace page when the wiki has
many such small pages. Let's go back and fix the bug so replace() can
again replace instead of reloading everything.
Bug: T203925
Change-Id: Ife8e1bd6f143f480eb8da09b817c85aadf33a923
Find: /isset\(\s*([^()]+?)\s*\)\s*\?\s*\1\s*:\s*/
Replace with: '\1 ?? '
(Everywhere except includes/PHPVersionCheck.php)
(Then, manually fix some line length and indentation issues)
Then manually reviewed the replacements for cases where confusing
operator precedence would result in incorrect results
(fixing those in I478db046a1cc162c6767003ce45c9b56270f3372).
Change-Id: I33b421c8cb11cdd4ce896488c9ff5313f03a38cf
It's unreasonable to expect newbies to know that "bug 12345" means "Task T14345"
except where it doesn't, so let's just standardise on the real numbers.
Change-Id: I46261416f7603558dceb76ebe695a5cac274e417
Do the process cache update immediately (as before) but push
the shared cache updates to a deferred update. This update
will thus start with a clear transaction snapshot, so it can
acquire the lock before the first SELECT as is proper.
Also added some missing method visibilities.
Bug: T144952
Change-Id: I462554b300d4688b09ab80cd1bb8a4340ffaa786
The unit tests spend nearly half of their run time resetting the user table for
each test. But the majority of tests do not depend on the user table having the
exact value that the setup code resets it to, and do not need to modify the
user objects they require to run.
Fix that by providing an API for tests to get User objects, and to indicate
whether the User object will be subject to destructive modification or not.
This allows User objects to be reused across multiple unit tests.
Change-Id: I17ef1f519759c5e7796c259282afe730ef722e96
This reduces the runtime of database-bound tests by about 40%
(on my system, from 4:55 to 2:47; results from Jenkins are
inconclusive).
The basic idea is to call addCoreDBData() only once, and have
a addDBDataOnce() that is called once per test class, not for
every test method lie addDBData() is. Most tests could be
trivially be changed to implement addDBDataOnce() instead of
addDBData(). The ones for which this did not work immediately
were left out for now. A closer look at the tests that still
implement addDBData() may reveal additional potential for
improvement.
TODO: Once this is merged, try to change addDBData() to
addDBDataOnce() where possible in extensions.
Change-Id: Iec4ed4c8419fb4ad87e6710de808863ede9998b7
Removed redundant set up in these classes (same as their paren
class MediaWikiLangTestCase does already).
* BlockTest
* ExportTest
* MWTimestampTest
* TitlePermissionTest
Change-Id: I28d18cb797bb249981727b02dffce4f0d8682b02
AuthManager is coming, which will make it easier to add alternative
methods of authentication. But in order to do that, we need to finally
get around to ripping the password-related bits out of the User class.
The password expiration handling isn't used anywhere in core or
extensions in Gerrit beyond testing for expired passwords on login and
resetting the expiry date on password change. Those bits have been
inlined and the functions removed; AuthManager will allow each
"authentication provider" to handle its own password expiration.
The methods for fetching passwords, including the fact that mPassword
and other fields are public, has also been removed. This is already
broken in combination with basically any extension that messes with
authentication, and the major use outside of that was in creating
system users like MassMessage's "MediaWiki message delivery" user.
Password setting methods are silently deprecated, since most of the
replacements won't be available until AuthManager. But uses in unit
testing can be replaced with TestUser::setPasswordForUser() immediately.
User::randomPassword() and User::getPasswordFactory() don't really
belong in User either. For the former a new PasswordFactory method has
been created, while the latter should just be replaced by the two lines
to create a PasswordFactory via its constructor.
Bug: T47716
Change-Id: I2c736ad72d946fa9b859e6cd335fa58aececc0d5
