This avoids confusion with the "render timestamp" held by the cache,
and is consistent with ::get*RevisionId() etc.
The old ::getTimestamp() and ::setTimestamp() methods have been
deprecated.
Change-Id: Idb5e687709c98086c5d3075d31885c58a0723197
Set the render ID for each parse stored into cache so that we are able
to identify a specific parse when there are dependencies (for example
in an edit based on that parse). This is recorded as a property added
to the ParserOutput, not the parent CacheTime interface. Even though
the render ID is /related/ to the CacheTime interface, CacheTime is
also used directly as a parser cache key, and the UUID should not be
part of the lookup key.
In general we are trying to move the location where these cache
properties are set as early as possible, so we check at each location
to ensure we don't overwrite a previously-set value. Eventually we
can convert most of these checks into assertions that the cache
properties have already been set (T350538). The primary location for
setting cache properties is the ContentRenderer.
Moved setting the revision timestamp into ContentRenderer as well, as
it was set along the same code paths. An extra parameter was added to
ContentRenderer::getParserOutput() to support this.
Added merge code to ParserOutput::mergeInternalMetaDataFrom() which
should ensure that cache time, revision, timestamp, and render id are
all set properly when multiple slots are combined together in MCR.
In order to ensure the render ID is set on all codepaths we needed to
plumb the GlobalIdGenerator service into ContentRenderer, ParserCache,
ParserCacheFactory, and RevisionOutputCache. Eventually (T350538) it
should only be necessary in the ContentRenderer.
Bug: T350538
Bug: T349868
Followup-To: Ic9b7cc0fcf365e772b7d080d76a065e3fd585f80
Change-Id: I72c5e6f86b7f081ab5ce7a56f5365d2f75067a78
This makes it much easier for IDEs and tools like Phan to understand
what's going on. Note this syntax is perfectly valid even if a class
is undefined. Language features like `use`, `instanceof`, and
`class_exists` work perfectly fine. We do this a lot in existing
code.
Change-Id: I4d397621ebcc6a7e842150f7641c1b23d082b730
Shown in phpunit test before start, class was namespaced in 9bfb75ff
PHP Deprecated: Use of MediaWiki\Parser\ParserOutput::setTOCHTML was
deprecated in MediaWiki 1.40. [Called from
MediaWiki\Tests\Parser\ParserCacheSerializationTestCases::getParserOutputTestCases
in /workspace/src/tests/phpunit/includes/parser/ParserCacheSerializationTestCases.php
at line 236] in /workspace/src/includes/debug/MWDebug.php on line 378
Bug: T355952
Follow-Up: I4c2cbb0a808b3881a4d6ca489eee5d8c8ebf26cf
Change-Id: I3d8e2beaf68dc55b93297b23e450c3bc89c5b222
This reverts commit 82da9cf14b.
Passing through Remex seems to have unexpected consequences to be
investigated but, for the sake of unbreaking the UBN, let's revert this
first.
Bug: T353920
Change-Id: Iaac7942aa77aee5ab525852ac5b41dd516ff13c9
The previous implementation was using an ad-hoc regular expression which
was matching inside the data-mw attribute of Parsoid output, eg:
<sup about="#mwt42" [...] typeof="mw:Extension/ref mw:Error" data-mw="{"name":"ref","attrs":{"name":"infobox_stats_ref_rail"},"body":{"html":"<style data-mw-deduplicate=\"TemplateStyles:r1133582631\" typeof=\"...">
After substitution, the <link> element inserted contained " instead of
" and so broke out of the attribute.
Instead use a proper HTML tokenizer (via wikimedia/remex-html) so that
we don't allow bogus matches inside attribute values.
To fix up tests:
* Don't deduplicate styles when parsing UX messages (also helps performance)
* Don't deduplicate styles in ContentHandler integration tests
* Don't deduplicate styles by default in parser tests
(unless explicit option is set)
Depends-On: Id9801a9ff540bd818a32bc6fa35c48a9cff12d3a
Depends-On: I5111f1fdb7140948b82113adbc774af286174ab3
Followup-To: Ic0b17e361bf6eb0e71c498abc17f5f67f82318f8
Change-Id: I32d3d1772243c3819e1e1486351d16871b6e21c4
Broadened the argument type to allow passing LinkTarget to:
* ParserOutput::addCategory()
* ParserOutput::addLanguageLink()
* ParserOutput::addLink()
* ParserOutput::addImage()
* ParserOutput::addTemplate()
This allows for a tighter interface with Parsoid's
ContentMetadataCollector class and avoids errors caused by passing the
wrong form of string title ("text" with spaces versus "dbkey" with
underscores).
There are a few performance problems remaining after this patch, which
only apply to use by Parsoid (not the legacy parser):
1. ::addLink() does inefficient db requests to fetch the page id for
each link if the optional $id parameter is not passed. These lookups
should be deferred and a LinkBatch used. (The legacy parser always
passes $id.)
2. ::addTemplate() similarly requires $page_id (and $rev_id) to be
passed, so is not currently usable by Parsoid.
3. ::addLanguageLink() uses Title::getFullText() which is not present
in LinkTarget and is currently implemented as a full Title lookup.
This is not an issue for the legacy parser, because it already has a
Title object so the lookup is a no-op, but could be improved for
Parsoid's use.
Bug: T296023
Change-Id: If21ec8563c8a619bdde7c0cb6534bb9009480a21
Pages that are fast to render can be omitted from the parser cache
to preserve disk space and cache write operations.
The threshold is configurable per namespace, so the tradeoff can
be evaluated based on different access patterns. For example, pages
that are accessed rarely, like file description pages on commons,
may have a high threshold configured, while pages that are read
frequently, like wikipedia articles, may be configured to be always
cached, using a 0 threshold.
Filtering is based on a time profile recorded in the ParserOutput.
A generic mechanism for capturing the timing profile is implemented
in the ContentHandler base class. Subclasses may implement a more
rigorous capture mechanism.
Bug: T346765
Change-Id: I38a6f3ef064f98f3ad6a7c60856b0248a94fe9ac
There are a couple of user options related classes already,
and the T321527 work on dynamic defaults is going to add
even more. Let's move them into a separate namespace
to make core a bit more organized.
Old name is kept as an alias for compatibility purposes.
Bug: T321527
Bug: T352284
Change-Id: I9822eb1553870b876d0b8a927e4e86c27d83bd52
The main motivation is to further reduce the complexity of the class:
* There is no code that ever writes to $this->mSubstIDs. It's
effectively a constant.
* According to CodeSearch the getSubstIDs() method is not used
anywhere. It's @internal to the parser.
* I find it weird that the parser needs to call 2 factory methods to
do 1 thing.
* I still find it a good idea to keep the knowledge encapsulated in
the factory and not have the [ 'subst', 'safesubst' ] array in the
parser. That's why I propose the new method.
Change-Id: I5c147c75200c3c34a410d93a0328b56ea00a050f
== Skin::wrapHTML ==
Skin::wrapHTML no longer has to perform any guessing of the
ParserOutput language. Nor does it have to special wiki pages vs
special pages in this regard. Yay, code removal.
== ImagePage ==
On URLs like /wiki/File:Example.jpg, the main output handler is
ImagePage::view. This calls the parent Article::view to handle most of
its output. Article::view obtains the ParserOptions, and then fetches
ParserOutput, and then adds `<div class=mw-parser-output>` and its
metadata to OutputPage.
Before this change, ImagePage::view was creating a wrapper based
on "predicting" what language the ParserOutput will contain. It
couldn't call the new OutputPage::getContentLanguage or some
equivalent as Article::view wouldn't have populated that yet.
This leaky abstraction is fixed by this change as now the `<div>`
from ParserOutput no longer comes with a "please wrap it properly"
contract that Article subclasses couldn't possibly implement correctly
(it coudln't wrap it after the fact because Article::view writes to
OutputPage directly).
RECENT (T310445):
A special case was recently added for file pages about translated SVGs.
For those, we decide which language to use for the "fullMedia" thumb
atop the page. This was recently changed as part of T310445 from a
hardcoded $wgLanguageCode (site content lang) to new problematic
Title::getPageViewLanguage, which tries to guestimate the page
language of the rendered ParserOutput and then gets the preferred
variant for the current user. The motivation for this was to support
language variants but used Title::getPageViewLanguage as a kitchen
sink to achieve that minor side-effect. The only part of this
now-deprecated method that we actually need is
LanguageConverter::getPreferredVariant().
Test plan: Covered by ImagePageTest.
== Skin mainpage-title ==
RECENT (T331095, T298715):
A special case was added to Skin::getTemplateData that powers the
mainpage-title interface message feature. This is empty by default,
but when created via MediaWiki:mainpage-title allows interface admins
to replace the H1 with a custom and localised page heading.
A few months ago, in Ifc9f0a7174, Title::getPageViewLanguage was
applied here to support language variants. Replace with the same
fix as for ImagePage. Revert back to Message::inContentLanguage()
but refactor to inLanguage() via MediaWikiServices::getContentLanguage
so that LanguageConverter::getPreferredVariant can be applied.
== EditPage ==
This was doing similar "predicting" of the ParserOutput language to
create an empty preview placeholder for use by preview.js. Now that
ApiParse (via ParserOutput::getText) returns a usable element without
any secret "you magically know the right class, lang, and dir" contract,
this placeholder is no longer needed.
Test Plan:
* EditPage: Default preview
1. index.php?title=Main_Page&action=edit
2. Show preview
3. Assert <div class="mw-content-ltr mw-parser-output" lang=en dir=ltr>
* EditPage: JS preview
1. Preferences > Editing > Show preview without reload
2. index.php?title=Main_Page&action=edit
3. Show preview
4. Assert <div class="mw-content-ltr mw-parser-output" lang=en dir=ltr>
5. Type something and 'Show preview' again
6. Assert old element gone, new text is shown, and new element
attributes are the same as the above.
== McrUndoAction ==
Same as EditPage basically, but without the JS preview use case.
== DifferenceEngine ==
Test:
1. Open /w/index.php?title=Main_Page&diff=0
(this shows the latest diff, can do manually by viewing
/wiki/Main_Page, click "View history", click "Compare selected revisions")
2. Assert <div class="mw-content-ltr mw-parser-output" lang=en dir=ltr>
3. Open /w/index.php?title=Main_Page&diff=0&action=render
4. Assert <div class="mw-content-ltr mw-parser-output" lang=en dir=ltr>
== Special:ExpandTemplates ==
Test:
1. /wiki/Special:ExpandTemplates
2. Write "Hello".
3. "OK"
4. Assert <div class="mw-content-ltr mw-parser-output" lang=en dir=ltr>
Bug: T341244
Depends-On: Icd9c079f5896ee83d86b9c2699636dc81d25a14c
Depends-On: I4e7484b3b94f1cb6062e7cef9f20626b650bb4b1
Depends-On: I90b88f3b3a3bbeba4f48d118f92f54864997e105
Change-Id: Ib130a055e46764544af0f1a46d2bc2b3a7ee85b7
* MagicWord::getId was added in r24808 (164bb322f2) but never used.
At the time, access modifiers like 'private' were not yet in use.
Deprecate the method with warnings, for removal in a future release.
* Fix zero coverage for MagicWord, due to constructor being
internal, this is only intended to be created via array and
factory classes. Let their tests cover this class.
* Remove redundant file-level description and ensure the class desc
and ingroup tag are on the class block instead.
Ref https://gerrit.wikimedia.org/r/q/owner:Krinkle+message:ingroup
* Mark constructor `@internal` (was already implied by
stable interface policy), and explain where to get the object
instead.
* Mark load() `@internal`. Method was introduced in 1.1 when the
class (and PHP) did not yet use visibility modifiers for private
methods. The only way to get an instance of MagicWord
(MagicWordFactory::get) already calls load(), the method is not
a no-op if called a second time, and (fortunately) there exist no
callers to this outside this class that I could find.
* MagicWordArray::getBaseRegex was marked as internal
in change I17f1b7207db8d2203c904508f3ab8a64b68736a8.
Change-Id: I4084f858bb356029c142fbdb699f91cf0d6ec56f
… instead of the generic MWException and even more generic Exception.
Most, if not all of these should be unreachable anyway. I.e. these
are what we call "unchecked" exceptions, see T240672.
We also have a polyfill for preg_last_error_msg. No need to wrap it
in a function_exists (any more).
Change-Id: Ie26bef3b4371d011ec3f1874986072605692f486
This matches the behavior of parserTests.txt again (in which
the fallback skin is used by ParserTestRunner::runLegacyTest).
The extra <span> wrappers were added by the Vector skin
(and could be affected by future changes to the Vector skin).
Follow-up to Ief6a6ee03ada8207fc5c60ea438412fa2d529022.
Change-Id: I33729b5026fcfbdbacc0e3fdfef91c9e6b461e6c
The SkinMustache class now accepts a skin option that allows
callers to specify a template that can be used to render
the edit section link.
Additional change:
* Parser tests updated as now edit link label is wrapped
as a span when rendered in Vector 2022 consistent with other
links.
Bug: T346944
Change-Id: Ief6a6ee03ada8207fc5c60ea438412fa2d529022
This also introduces the ephemeral field "$mTransformedText" to store
the result of transformation in ParserOutput.
This is a first step before the transformation uses HtmlHolder as input
and output.
Bug: T348253
Change-Id: I312f3748ebfb0373ee3542ba0abdeefe7db1d488
The ::setTOCHTML() and ::getTOCHTML() method have been deprecated
since 1.40; there's no reason we should be updating ::$mTOCHTML
behind their backs.
Bug: T348134
Change-Id: I9396bc0a2caeb974a06c5b47075b3e2bb9f4278a
It is difficult to distinguish this method from OutputPage::addJsConfigVars()
in code search:
https://codesearch.wmcloud.org/deployed/?q=%5BOo%5Dut%28put%29%3F%28%5C%28%5C%29%29%3F-%3EgetCategories%5C%28&files=&excludeFiles=&repos=
We generally try to replace $output with $parserOutput or $pOutput
as we touch code to improve the ability of codesearch to dig up
deprecated ParserOutput methods.
Bug: T305161
Depends-On: I02dd4f61c43c225b0ef6dc51c3e4f9d967a0a272
Depends-On: I61d2d77591579d825ad9d37f902e40366be55dd6
Depends-On: I91155106b7a9e10d3334f95ba4936d02851bfb11
Depends-On: Iaca745c79d9587571af03b23b21d76a6cba0ebf1
Depends-On: Id10a171c44411b1233ee4d6cf8fbd3dc57744eef
Depends-On: I47a25c011d9bd4b1a15dda4e673e32c25eb64f2b
Depends-On: I683fc768aba50b801f46467fcfa1668fa8731ea6
Change-Id: I5a2ac1c99b8b199102e12f0d32dd6ec5cdc24054
ParserOutput::addOutputHook() has been deprecated since 1.38, and without
any calls to ::addOutputHook() the associated ::getOutputHooks() and
$wgParserOutputHooks configuration do nothing.
Bug: T292321
Bug: T305161
Change-Id: Ib770c680d5e0697980e7e36a323ec56ba1d806b8
Many private and even public properties and class constants were
documented using #-style comments, which were not available in Doxygen
documentation and editor tooling. Move these comments to PHPDoc comments
to make them accessible.
Add type declarations to private and internal properties wherever
possible. Remove PHPDoc documentation made redundant by this, but
add/keep PHPDoc documentation where it provides additional value
(human-readable documentation, array types, union types). Don’t add type
declarations to non-internal public properties as it potentially causes
breakage in case some external code not only uses the deprecated
property, but even writes it. These type declarations should be added
when the properties are made private or internal.
Change-Id: I247643b9bf0cabdc92a7e893d653edeaed9a1307
Transitions the validateParserCacheSerializationTestData maintenance
script to the new maintenance script mechanism based on
maintenance/run.php
While we're here, also fix a minor bug that made the `--create` option
crash if this was the very first time serialization files for a
particular test case were being generated (ie, there was no prior
existing serialization on disk yet).
Change-Id: Ic0dadce750a2b390739ae657bab7f899860d1078
Mock the needed services, or set fixed values to avoid DB lookups, when
possible. Add the test to the Database group otherwise, e.g. for things
like Skin and Parser that use global state all over the place.
Change-Id: I8d87013d89accaf04d0ac19cb4b7216290383eb5
