BOSL2/walls.scad

//////////////////////////////////////////////////////////////////////
// LibFile: walls.scad
//   Various wall constructions.
// Includes:
//   include <BOSL2/std.scad>
//   include <BOSL2/walls.scad>
// FileGroup: Parts
// FileSummary: Walls and structural elements that 3D print without support.
//////////////////////////////////////////////////////////////////////


// Section: Walls


// Module: sparse_wall()
//
// Usage:
//   sparse_wall(h, l, thick, [maxang=], [strut=], [max_bridge=]) [ATTACHMENTS];
//
// Topics: FDM Optimized, Walls
//
// Description:
//   Makes an open rectangular strut with X-shaped cross-bracing, designed to reduce
//   the need for support material in 3D printing.
//
// Arguments:
//   h = height of strut wall.
//   l = length of strut wall.
//   thick = thickness of strut wall.
//   ---
//   maxang = maximum overhang angle of cross-braces.
//   strut = the width of the cross-braces.
//   max_bridge = maximum bridging distance between cross-braces.
//   anchor = Translate so anchor point is at origin (0,0,0).  See [anchor](attachments.scad#subsection-anchor).  Default: `CENTER`
//   spin = Rotate this many degrees around the Z axis after anchor.  See [spin](attachments.scad#subsection-spin).  Default: `0`
//   orient = Vector to rotate top towards, after spin.  See [orient](attachments.scad#subsection-orient).  Default: `UP`
//
// See Also: corrugated_wall(), thinning_wall()
//
// Example: Typical Shape
//   sparse_wall(h=40, l=100, thick=3);
// Example: Thinner Strut
//   sparse_wall(h=40, l=100, thick=3, strut=2);
// Example: Larger maxang
//   sparse_wall(h=40, l=100, thick=3, strut=2, maxang=45);
// Example: Longer max_bridge
//   sparse_wall(h=40, l=100, thick=3, strut=2, maxang=45, max_bridge=30);
module sparse_wall(h=50, l=100, thick=4, maxang=30, strut=5, max_bridge=20, anchor=CENTER, spin=0, orient=UP)
{
    zoff = h/2 - strut/2;
    yoff = l/2 - strut/2;

    maxhyp = 1.5 * (max_bridge+strut)/2 / sin(maxang);
    maxz = 2 * maxhyp * cos(maxang);

    zreps = ceil(2*zoff/maxz);
    zstep = 2*zoff / zreps;

    hyp = zstep/2 / cos(maxang);
    maxy = min(2 * hyp * sin(maxang), max_bridge+strut);

    yreps = ceil(2*yoff/maxy);
    ystep = 2*yoff / yreps;

    ang = atan(ystep/zstep);
    len = zstep / cos(ang);

    size = [thick, l, h];
    attachable(anchor,spin,orient, size=size) {
        yrot(90)
        linear_extrude(height=thick, convexity=4*yreps, center=true) {
            difference() {
                square([h, l], center=true);
                square([h-2*strut, l-2*strut], center=true);
            }
            ycopies(ystep, n=yreps) {
                xcopies(zstep, n=zreps) {
                    skew(syx=tan(-ang)) square([(h-strut)/zreps, strut], center=true);
                    skew(syx=tan( ang)) square([(h-strut)/zreps, strut], center=true);
                }
            }
        }
        children();
    }
}


// Module: corrugated_wall()
//
// Usage:
//   corrugated_wall(h, l, thick, [strut=], [wall=]) [ATTACHMENTS];
//
// Topics: FDM Optimized, Walls
//
// Description:
//   Makes a corrugated wall which relieves contraction stress while still
//   providing support strength.  Designed with 3D printing in mind.
//
// Arguments:
//   h = height of strut wall.
//   l = length of strut wall.
//   thick = thickness of strut wall.
//   ---
//   strut = the width of the cross-braces.
//   wall = thickness of corrugations.
//   anchor = Translate so anchor point is at origin (0,0,0).  See [anchor](attachments.scad#subsection-anchor).  Default: `CENTER`
//   spin = Rotate this many degrees around the Z axis after anchor.  See [spin](attachments.scad#subsection-spin).  Default: `0`
//   orient = Vector to rotate top towards, after spin.  See [orient](attachments.scad#subsection-orient).  Default: `UP`
//
// See Also: sparse_wall(), thinning_wall()
//
// Example: Typical Shape
//   corrugated_wall(h=50, l=100);
// Example: Wider Strut
//   corrugated_wall(h=50, l=100, strut=8);
// Example: Thicker Wall
//   corrugated_wall(h=50, l=100, strut=8, wall=3);
module corrugated_wall(h=50, l=100, thick=5, strut=5, wall=2, anchor=CENTER, spin=0, orient=UP)
{
    amplitude = (thick - wall) / 2;
    period = min(15, thick * 2);
    steps = quantup(segs(thick/2),4);
    step = period/steps;
    il = l - 2*strut + 2*step;
    size = [thick, l, h];
    attachable(anchor,spin,orient, size=size) {
        union() {
            linear_extrude(height=h-2*strut+0.1, slices=2, convexity=ceil(2*il/period), center=true) {
                polygon(
                    points=concat(
                        [for (y=[-il/2:step:il/2]) [amplitude*sin(y/period*360)-wall/2, y] ],
                        [for (y=[il/2:-step:-il/2]) [amplitude*sin(y/period*360)+wall/2, y] ]
                    )
                );
            }
            difference() {
                cube([thick, l, h], center=true);
                cube([thick+0.5, l-2*strut, h-2*strut], center=true);
            }
        }
        children();
    }
}


// Module: thinning_wall()
//
// Usage:
//   thinning_wall(h, l, thick, [ang=], [braces=], [strut=], [wall=]) [ATTACHMENTS];
//
// Topics: FDM Optimized, Walls
//
// Description:
//   Makes a rectangular wall which thins to a smaller width in the center,
//   with angled supports to prevent critical overhangs.
//
// Arguments:
//   h = Height of wall.
//   l = Length of wall.  If given as a vector of two numbers, specifies bottom and top lengths, respectively.
//   thick = Thickness of wall.
//   ---
//   ang = Maximum overhang angle of diagonal brace.
//   braces = If true, adds diagonal crossbraces for strength.
//   strut = The width of the borders and diagonal braces.  Default: `thick/2`
//   wall = The thickness of the thinned portion of the wall.  Default: `thick/2`
//   anchor = Translate so anchor point is at origin (0,0,0).  See [anchor](attachments.scad#subsection-anchor).  Default: `CENTER`
//   spin = Rotate this many degrees around the Z axis after anchor.  See [spin](attachments.scad#subsection-spin).  Default: `0`
//   orient = Vector to rotate top towards, after spin.  See [orient](attachments.scad#subsection-orient).  Default: `UP`
//
// See Also: sparse_wall(), corrugated_wall(), thinning_triangle()
//
// Example: Typical Shape
//   thinning_wall(h=50, l=80, thick=4);
// Example: Trapezoidal
//   thinning_wall(h=50, l=[80,50], thick=4);
// Example: Trapezoidal with Braces
//   thinning_wall(h=50, l=[80,50], thick=4, strut=4, wall=2, braces=true);
module thinning_wall(h=50, l=100, thick=5, ang=30, braces=false, strut, wall, anchor=CENTER, spin=0, orient=UP)
{
    l1 = (l[0] == undef)? l : l[0];
    l2 = (l[1] == undef)? l : l[1];
    strut = is_num(strut)? strut : min(h,l1,l2,thick)/2;
    wall = is_num(wall)? wall : thick/2;

    bevel_h = strut + (thick-wall)/2/tan(ang);
    cp1 = circle_2tangents(strut, [0,0,+h/2], [l2/2,0,+h/2], [l1/2,0,-h/2])[0];
    cp2 = circle_2tangents(bevel_h, [0,0,+h/2], [l2/2,0,+h/2], [l1/2,0,-h/2])[0];
    cp3 = circle_2tangents(bevel_h, [0,0,-h/2], [l1/2,0,-h/2], [l2/2,0,+h/2])[0];
    cp4 = circle_2tangents(strut, [0,0,-h/2], [l1/2,0,-h/2], [l2/2,0,+h/2])[0];

    z1 = h/2;
    z2 = cp1.z;
    z3 = cp2.z;

    x1 = l2/2;
    x2 = cp1.x;
    x3 = cp2.x;
    x4 = l1/2;
    x5 = cp4.x;
    x6 = cp3.x;

    y1 = thick/2;
    y2 = wall/2;

    corner1 = [ x2, 0,  z2];
    corner2 = [-x5, 0, -z2];
    brace_len = norm(corner1-corner2);

    size = [l1, thick, h];
    attachable(anchor,spin,orient, size=size, size2=[l2,thick]) {
        zrot(90) {
            polyhedron(
                points=[
                    [-x4, -y1, -z1],
                    [ x4, -y1, -z1],
                    [ x1, -y1,  z1],
                    [-x1, -y1,  z1],

                    [-x5, -y1, -z2],
                    [ x5, -y1, -z2],
                    [ x2, -y1,  z2],
                    [-x2, -y1,  z2],

                    [-x6, -y2, -z3],
                    [ x6, -y2, -z3],
                    [ x3, -y2,  z3],
                    [-x3, -y2,  z3],

                    [-x4,  y1, -z1],
                    [ x4,  y1, -z1],
                    [ x1,  y1,  z1],
                    [-x1,  y1,  z1],

                    [-x5,  y1, -z2],
                    [ x5,  y1, -z2],
                    [ x2,  y1,  z2],
                    [-x2,  y1,  z2],

                    [-x6,  y2, -z3],
                    [ x6,  y2, -z3],
                    [ x3,  y2,  z3],
                    [-x3,  y2,  z3],
                ],
                faces=[
                    [ 4,  5,  1],
                    [ 5,  6,  2],
                    [ 6,  7,  3],
                    [ 7,  4,  0],

                    [ 4,  1,  0],
                    [ 5,  2,  1],
                    [ 6,  3,  2],
                    [ 7,  0,  3],

                    [ 8,  9,  5],
                    [ 9, 10,  6],
                    [10, 11,  7],
                    [11,  8,  4],

                    [ 8,  5,  4],
                    [ 9,  6,  5],
                    [10,  7,  6],
                    [11,  4,  7],

                    [11, 10,  9],
                    [20, 21, 22],

                    [11,  9,  8],
                    [20, 22, 23],

                    [16, 17, 21],
                    [17, 18, 22],
                    [18, 19, 23],
                    [19, 16, 20],

                    [16, 21, 20],
                    [17, 22, 21],
                    [18, 23, 22],
                    [19, 20, 23],

                    [12, 13, 17],
                    [13, 14, 18],
                    [14, 15, 19],
                    [15, 12, 16],

                    [12, 17, 16],
                    [13, 18, 17],
                    [14, 19, 18],
                    [15, 16, 19],

                    [ 0,  1, 13],
                    [ 1,  2, 14],
                    [ 2,  3, 15],
                    [ 3,  0, 12],

                    [ 0, 13, 12],
                    [ 1, 14, 13],
                    [ 2, 15, 14],
                    [ 3, 12, 15],
                ],
                convexity=6
            );
            if(braces) {
                bracepath = [
                    [-strut*0.33,thick/2],
                    [ strut*0.33,thick/2],
                    [ strut*0.33+(thick-wall)/2/tan(ang), wall/2],
                    [ strut*0.33+(thick-wall)/2/tan(ang),-wall/2],
                    [ strut*0.33,-thick/2],
                    [-strut*0.33,-thick/2],
                    [-strut*0.33-(thick-wall)/2/tan(ang),-wall/2],
                    [-strut*0.33-(thick-wall)/2/tan(ang), wall/2]
                ];
                xflip_copy() {
                    intersection() {
                        extrude_from_to(corner1,corner2) {
                            polygon(bracepath);
                        }
                        prismoid([l1,thick],[l2,thick],h=h,anchor=CENTER);
                    }
                }
            }
        }
        children();
    }
}


// Module: thinning_triangle()
//
// Usage:
//   thinning_triangle(h, l, thick, [ang=], [strut=], [wall=], [diagonly=], [center=]) [ATTACHMENTS];
//
// Topics: FDM Optimized, Walls
//
// Description:
//   Makes a triangular wall with thick edges, which thins to a smaller width in
//   the center, with angled supports to prevent critical overhangs.
//
// Arguments:
//   h = height of wall.
//   l = length of wall.
//   thick = thickness of wall.
//   ---
//   ang = maximum overhang angle of diagonal brace.
//   strut = the width of the diagonal brace.
//   wall = the thickness of the thinned portion of the wall.
//   diagonly = boolean, which denotes only the diagonal side (hypotenuse) should be thick.
//   center = If true, centers shape.  If false, overrides `anchor` with `UP+BACK`.
//   anchor = Translate so anchor point is at origin (0,0,0).  See [anchor](attachments.scad#subsection-anchor).  Default: `CENTER`
//   spin = Rotate this many degrees around the Z axis after anchor.  See [spin](attachments.scad#subsection-spin).  Default: `0`
//   orient = Vector to rotate top towards, after spin.  See [orient](attachments.scad#subsection-orient).  Default: `UP`
//
// See Also: thinning_wall()
//
// Example: Centered
//   thinning_triangle(h=50, l=80, thick=4, ang=30, strut=5, wall=2, center=true);
// Example: All Braces
//   thinning_triangle(h=50, l=80, thick=4, ang=30, strut=5, wall=2, center=false);
// Example: Diagonal Brace Only
//   thinning_triangle(h=50, l=80, thick=4, ang=30, strut=5, wall=2, diagonly=true, center=false);
module thinning_triangle(h=50, l=100, thick=5, ang=30, strut=5, wall=3, diagonly=false, center, anchor, spin=0, orient=UP)
{
    dang = atan(h/l);
    dlen = h/sin(dang);
    size = [thick, l, h];
    anchor = get_anchor(anchor, center, BOT+FRONT, CENTER);
    attachable(anchor,spin,orient, size=size) {
        difference() {
            union() {
                if (!diagonly) {
                    translate([0, 0, -h/2])
                        narrowing_strut(w=thick, l=l, wall=strut, ang=ang);
                    translate([0, -l/2, 0])
                        xrot(-90) narrowing_strut(w=thick, l=h-0.1, wall=strut, ang=ang);
                }
                intersection() {
                    cube(size=[thick, l, h], center=true);
                    xrot(-dang) yrot(180) {
                        narrowing_strut(w=thick, l=dlen*1.2, wall=strut, ang=ang);
                    }
                }
                cube(size=[wall, l-0.1, h-0.1], center=true);
            }
            xrot(-dang) {
                translate([0, 0, h/2]) {
                    cube(size=[thick+0.1, l*2, h], center=true);
                }
            }
        }
        children();
    }
}


// Module: narrowing_strut()
//
// Usage:
//   narrowing_strut(w, l, wall, [ang=]) [ATTACHMENTS];
//
// Topics: FDM Optimized
//
// Description:
//   Makes a rectangular strut with the top side narrowing in a triangle.
//   The shape created may be likened to an extruded home plate from baseball.
//   This is useful for constructing parts that minimize the need to support
//   overhangs.
//
// Arguments:
//   w = Width (thickness) of the strut.
//   l = Length of the strut.
//   wall = height of rectangular portion of the strut.
//   ---
//   ang = angle that the trianglar side will converge at.
//   anchor = Translate so anchor point is at origin (0,0,0).  See [anchor](attachments.scad#subsection-anchor).  Default: `CENTER`
//   spin = Rotate this many degrees around the Z axis after anchor.  See [spin](attachments.scad#subsection-spin).  Default: `0`
//   orient = Vector to rotate top towards, after spin.  See [orient](attachments.scad#subsection-orient).  Default: `UP`
//
// Example:
//   narrowing_strut(w=10, l=100, wall=5, ang=30);
module narrowing_strut(w=10, l=100, wall=5, ang=30, anchor=BOTTOM, spin=0, orient=UP)
{
    h = wall + w/2/tan(ang);
    size = [w, l, h];
    attachable(anchor,spin,orient, size=size) {
        xrot(90)
        fwd(h/2) {
            linear_extrude(height=l, center=true, slices=2) {
                back(wall/2) square([w, wall], center=true);
                back(wall-0.001) {
                    yscale(1/tan(ang)) {
                        difference() {
                            zrot(45) square(w/sqrt(2), center=true);
                            fwd(w/2) square(w, center=true);
                        }
                    }
                }
            }
        }
        children();
    }
}



// vim: expandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap