From 67bf788daee454d6cfc4be0dc59155c22151fe29 Mon Sep 17 00:00:00 2001
From: Revar Desmera <revarbat@gmail.com>
Date: Thu, 21 Feb 2019 22:39:10 -0800
Subject: [PATCH] Tweaked examples word wrap

---
 README.md | 38 +++++++++++++++++++-------------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/README.md b/README.md
index fe60f6d..e212237 100644
--- a/README.md
+++ b/README.md
@@ -18,27 +18,27 @@ For purposes of the BOSL library, the following terms apply:
 ## Examples
 A lot of the features of this library are to allow shorter, easier-to-read, intent-based coding.  For example:
 
-`BOSL/transforms.scad` Examples  | Raw OpenSCAD Equivalent
--------------------------------- | -------------------------------
-`up(5)`                          | `translate([0,0,5])`
-`xrot(30, cp=[0, 10, 20])`       | `translate([0,10,20]) rotate([30,0,0]) translate([0,-10,-20])`
-`xspread(20, n=3)`               | `for (dx=[-20,0,20]) translate([dx,0,0])`
-`zring(n=6, r=20)`               | `for (zr=[0:5]) rotate([0,0,zr*60]) translate([20,0,0])`
-`skew_xy(xa=30,ya=45)`           | `multmatrix([[1, 0, tan(30), 0], [0, 1, tan(45), 0], [0, 0, 1, 0], [0, 0, 0, 1]])`
+`BOSL/transforms.scad` Examples | Raw OpenSCAD Equivalent
+------------------------------- | -------------------------------
+`up(5)`                         | `translate([0,0,5])`
+`xrot(30,cp=[0, 10, 20])`       | `translate([0,10,20]) rotate([30,0,0]) translate([0,-10,-20])`
+`xspread(20,n=3)`               | `for (dx=[-20,0,20]) translate([dx,0,0])`
+`zring(n=6,r=20)`               | `for (zr=[0:5]) rotate([0,0,zr*60]) translate([20,0,0])`
+`skew_xy(xa=30,ya=45)`          | `multmatrix([[1, 0, tan(30), 0], [0, 1, tan(45), 0], [0, 0, 1, 0], [0, 0, 0, 1]])`
 
-`BOSL/shapes.scad` Examples          | Raw OpenSCAD Equivalent
------------------------------------- | -------------------------------
-`upcube([10,20,30]);`                | `translate([0,0,15]) cube([10,20,30], center=true);`
-`rcube([20,20,30], r=5, $fn=32);`    | `minkowski() {cube([10,10,20], center=true); sphere(r=5, $fn=32);}`
-`trapezoid([30,40], [20,30], h=10);` | `hull() {translate([0,0,0.005]) cube([30,40,0.01], center=true); translate([0,0,9.995]) cube([20,30,0.01], center=true);}`
-`xcyl(l=20, d=4);`                   | `rotate([0,90,0]) cylinder(h=20, d=4, center=true);`
-`rcylinder(h=100, d=40, fillet=5);`  | `translate([0,0,50]) minkowski() {cylinder(h=90, d=30, center=true); sphere(r=5);}`
+`BOSL/shapes.scad` Examples        | Raw OpenSCAD Equivalent
+---------------------------------- | -------------------------------
+`upcube([10,20,30]);`              | `translate([0,0,15]) cube([10,20,30], center=true);`
+`rcube([20,20,30],r=5,$fn=32);`    | `minkowski() {cube([10,10,20], center=true); sphere(r=5, $fn=32);}`
+`trapezoid([30,40],[20,30],h=10);` | `hull() {translate([0,0,0.005]) cube([30,40,0.01], center=true); translate([0,0,9.995]) cube([20,30,0.01],center=true);}`
+`xcyl(l=20,d=4);`                  | `rotate([0,90,0]) cylinder(h=20, d=4, center=true);`
+`rcylinder(h=100,d=40,fillet=5);`  | `translate([0,0,50]) minkowski() {cylinder(h=90, d=30, center=true); sphere(r=5);}`
 
-`BOSL/masks.scad` Examples           | Raw Openscad Equivalent
------------------------------------- | -------------------------------
-`chamfer_mask_z(l=20, chamfer=5);`   | `rotate(45) cube([5*sqrt(2), 5*sqrt(2), 20], center=true);`
-`fillet_mask_z(l=20, fillet=5);`     | `difference() {cube([10,10,20], center=true); for(dx=[-5,5],dy=[-5,5]) translate([dx,dy,0]) cylinder(h=20.1, r=5, center=true);}`
-`fillet_hole_mask(r=30, fillet=5);`  | `difference() {cube([70,70,10], center=true); translate([0,0,-5]) rotate_extrude(convexity=4) translate([30,0,0]) circle(r=5);}`
+`BOSL/masks.scad` Examples          | Raw Openscad Equivalent
+----------------------------------- | -------------------------------
+`chamfer_mask_z(l=20,chamfer=5);`   | `rotate(45) cube([5*sqrt(2), 5*sqrt(2), 20], center=true);`
+`fillet_mask_z(l=20,fillet=5);`     | `difference() {cube([10,10,20], center=true); for(dx=[-5,5],dy=[-5,5]) translate([dx,dy,0]) cylinder(h=20.1, r=5, center=true);}`
+`fillet_hole_mask(r=30,fillet=5);`  | `difference() {cube([70,70,10], center=true); translate([0,0,-5]) rotate_extrude(convexity=4) translate([30,0,0]) circle(r=5);}`
 
 
 ## The Library Files