mirror of
https://github.com/BelfrySCAD/BOSL2.git
synced 2024-12-29 16:29:40 +00:00
Implementation for issue #786
This commit is contained in:
Garth Minette
parent
0638785774
commit
696e51c2aa
1 changed files with 98 additions and 12 deletions
110
shapes3d.scad
110
shapes3d.scad
|
|
@ -1276,7 +1276,21 @@ module cyl(
|
|||
// d = Optional diameter of cylinder. (use instead of `r`)
|
||||
// d1 = Optional diameter of left (X-) end of cylinder.
|
||||
// d2 = Optional diameter of right (X+) end of cylinder.
|
||||
// circum = If true, cylinder should circumscribe the circle of the given size. Otherwise inscribes. Default: `false`
|
||||
// chamfer = The size of the chamfers on the ends of the cylinder. Default: none.
|
||||
// chamfer1 = The size of the chamfer on the left end of the cylinder. Default: none.
|
||||
// chamfer2 = The size of the chamfer on the right end of the cylinder. Default: none.
|
||||
// chamfang = The angle in degrees of the chamfers on the ends of the cylinder.
|
||||
// chamfang1 = The angle in degrees of the chamfer on the left end of the cylinder.
|
||||
// chamfang2 = The angle in degrees of the chamfer on the right end of the cylinder.
|
||||
// from_end = If true, chamfer is measured from the end of the cylinder, instead of inset from the edge. Default: `false`.
|
||||
// rounding = The radius of the rounding on the ends of the cylinder. Default: none.
|
||||
// rounding1 = The radius of the rounding on the left end of the cylinder.
|
||||
// rounding2 = The radius of the rounding on the right end of the cylinder.
|
||||
// realign = If true, rotate the cylinder by half the angle of one face.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP`
|
||||
//
|
||||
// Example: By Radius
|
||||
// ydistribute(50) {
|
||||
|
|
@ -1289,19 +1303,31 @@ module cyl(
|
|||
// xcyl(l=35, d=20);
|
||||
// xcyl(l=35, d1=30, d2=10);
|
||||
// }
|
||||
module xcyl(h, r, d, r1, r2, d1, d2, l, anchor=CENTER)
|
||||
{
|
||||
module xcyl(
|
||||
h, r, d, r1, r2, d1, d2, l,
|
||||
chamfer, chamfer1, chamfer2,
|
||||
chamfang, chamfang1, chamfang2,
|
||||
rounding, rounding1, rounding2,
|
||||
circum=false, realign=false, from_end=false,
|
||||
anchor=CENTER, spin=0, orient=UP
|
||||
) {
|
||||
r1 = get_radius(r1=r1, r=r, d1=d1, d=d, dflt=1);
|
||||
r2 = get_radius(r1=r2, r=r, d1=d2, d=d, dflt=1);
|
||||
l = first_defined([l, h, 1]);
|
||||
attachable(anchor,0,UP, r1=r1, r2=r2, l=l, axis=RIGHT) {
|
||||
cyl(l=l, r1=r1, r2=r2, orient=RIGHT, anchor=CENTER);
|
||||
attachable(anchor,spin,orient, r1=r1, r2=r2, l=l, axis=RIGHT) {
|
||||
cyl(
|
||||
l=l, r1=r1, r2=r2,
|
||||
chamfer=chamfer, chamfer1=chamfer1, chamfer2=chamfer2,
|
||||
chamfang=chamfang, chamfang1=chamfang1, chamfang2=chamfang2,
|
||||
rounding=rounding, rounding1=rounding1, rounding2=rounding2,
|
||||
circum=circum, realign=realign, from_end=from_end,
|
||||
anchor=CENTER, orient=RIGHT
|
||||
);
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
// Module: ycyl()
|
||||
//
|
||||
// Description:
|
||||
|
|
@ -1323,7 +1349,21 @@ module xcyl(h, r, d, r1, r2, d1, d2, l, anchor=CENTER)
|
|||
// d = Diameter of cylinder.
|
||||
// d1 = Diameter of front (Y-) end of one.
|
||||
// d2 = Diameter of back (Y+) end of one.
|
||||
// circum = If true, cylinder should circumscribe the circle of the given size. Otherwise inscribes. Default: `false`
|
||||
// chamfer = The size of the chamfers on the ends of the cylinder. Default: none.
|
||||
// chamfer1 = The size of the chamfer on the front end of the cylinder. Default: none.
|
||||
// chamfer2 = The size of the chamfer on the back end of the cylinder. Default: none.
|
||||
// chamfang = The angle in degrees of the chamfers on the ends of the cylinder.
|
||||
// chamfang1 = The angle in degrees of the chamfer on the front end of the cylinder.
|
||||
// chamfang2 = The angle in degrees of the chamfer on the back end of the cylinder.
|
||||
// from_end = If true, chamfer is measured from the end of the cylinder, instead of inset from the edge. Default: `false`.
|
||||
// rounding = The radius of the rounding on the ends of the cylinder. Default: none.
|
||||
// rounding1 = The radius of the rounding on the front end of the cylinder.
|
||||
// rounding2 = The radius of the rounding on the back end of the cylinder.
|
||||
// realign = If true, rotate the cylinder by half the angle of one face.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP`
|
||||
//
|
||||
// Example: By Radius
|
||||
// xdistribute(50) {
|
||||
|
|
@ -1336,13 +1376,26 @@ module xcyl(h, r, d, r1, r2, d1, d2, l, anchor=CENTER)
|
|||
// ycyl(l=35, d=20);
|
||||
// ycyl(l=35, d1=30, d2=10);
|
||||
// }
|
||||
module ycyl(h, r, d, r1, r2, d1, d2, l, anchor=CENTER)
|
||||
{
|
||||
module ycyl(
|
||||
h, r, d, r1, r2, d1, d2, l,
|
||||
chamfer, chamfer1, chamfer2,
|
||||
chamfang, chamfang1, chamfang2,
|
||||
rounding, rounding1, rounding2,
|
||||
circum=false, realign=false, from_end=false,
|
||||
anchor=CENTER, spin=0, orient=UP
|
||||
) {
|
||||
r1 = get_radius(r1=r1, r=r, d1=d1, d=d, dflt=1);
|
||||
r2 = get_radius(r1=r2, r=r, d1=d2, d=d, dflt=1);
|
||||
l = first_defined([l, h, 1]);
|
||||
attachable(anchor,0,UP, r1=r1, r2=r2, l=l, axis=BACK) {
|
||||
cyl(l=l, h=h, r1=r1, r2=r2, orient=BACK, anchor=CENTER);
|
||||
attachable(anchor,spin,orient, r1=r1, r2=r2, l=l, axis=BACK) {
|
||||
cyl(
|
||||
l=l, r1=r1, r2=r2,
|
||||
chamfer=chamfer, chamfer1=chamfer1, chamfer2=chamfer2,
|
||||
chamfang=chamfang, chamfang1=chamfang1, chamfang2=chamfang2,
|
||||
rounding=rounding, rounding1=rounding1, rounding2=rounding2,
|
||||
circum=circum, realign=realign, from_end=from_end,
|
||||
anchor=CENTER, orient=BACK
|
||||
);
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
|
@ -1370,7 +1423,21 @@ module ycyl(h, r, d, r1, r2, d1, d2, l, anchor=CENTER)
|
|||
// d = Diameter of cylinder.
|
||||
// d1 = Diameter of front (Y-) end of one.
|
||||
// d2 = Diameter of back (Y+) end of one.
|
||||
// circum = If true, cylinder should circumscribe the circle of the given size. Otherwise inscribes. Default: `false`
|
||||
// chamfer = The size of the chamfers on the ends of the cylinder. Default: none.
|
||||
// chamfer1 = The size of the chamfer on the bottom end of the cylinder. Default: none.
|
||||
// chamfer2 = The size of the chamfer on the top end of the cylinder. Default: none.
|
||||
// chamfang = The angle in degrees of the chamfers on the ends of the cylinder.
|
||||
// chamfang1 = The angle in degrees of the chamfer on the bottom end of the cylinder.
|
||||
// chamfang2 = The angle in degrees of the chamfer on the top end of the cylinder.
|
||||
// from_end = If true, chamfer is measured from the end of the cylinder, instead of inset from the edge. Default: `false`.
|
||||
// rounding = The radius of the rounding on the ends of the cylinder. Default: none.
|
||||
// rounding1 = The radius of the rounding on the bottom end of the cylinder.
|
||||
// rounding2 = The radius of the rounding on the top end of the cylinder.
|
||||
// realign = If true, rotate the cylinder by half the angle of one face.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP`
|
||||
//
|
||||
// Example: By Radius
|
||||
// xdistribute(50) {
|
||||
|
|
@ -1383,9 +1450,28 @@ module ycyl(h, r, d, r1, r2, d1, d2, l, anchor=CENTER)
|
|||
// zcyl(l=35, d=20);
|
||||
// zcyl(l=35, d1=30, d2=10);
|
||||
// }
|
||||
module zcyl(h, r, d, r1, r2, d1, d2, l, anchor=CENTER)
|
||||
{
|
||||
cyl(l=l, h=h, r=r, r1=r1, r2=r2, d=d, d1=d1, d2=d2, orient=UP, anchor=anchor) children();
|
||||
module zcyl(
|
||||
h, r, d, r1, r2, d1, d2, l,
|
||||
chamfer, chamfer1, chamfer2,
|
||||
chamfang, chamfang1, chamfang2,
|
||||
rounding, rounding1, rounding2,
|
||||
circum=false, realign=false, from_end=false,
|
||||
anchor=CENTER, spin=0, orient=UP
|
||||
) {
|
||||
r1 = get_radius(r1=r1, r=r, d1=d1, d=d, dflt=1);
|
||||
r2 = get_radius(r1=r2, r=r, d1=d2, d=d, dflt=1);
|
||||
l = first_defined([l, h, 1]);
|
||||
attachable(anchor,spin,orient, r1=r1, r2=r2, l=l) {
|
||||
cyl(
|
||||
l=l, r1=r1, r2=r2,
|
||||
chamfer=chamfer, chamfer1=chamfer1, chamfer2=chamfer2,
|
||||
chamfang=chamfang, chamfang1=chamfang1, chamfang2=chamfang2,
|
||||
rounding=rounding, rounding1=rounding1, rounding2=rounding2,
|
||||
circum=circum, realign=realign, from_end=from_end,
|
||||
anchor=CENTER
|
||||
);
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue