mirror of
https://github.com/BelfrySCAD/BOSL2.git
synced 2024-12-29 16:29:40 +00:00
Split beverage bottle threading modules into bottlecaps.scad
This commit is contained in:
Revar Desmera
parent
3846a367ee
commit
7869a27326
3 changed files with 351 additions and 338 deletions
351
bottlecaps.scad
Normal file
351
bottlecaps.scad
Normal file
|
|
@ -0,0 +1,351 @@
|
|||
//////////////////////////////////////////////////////////////////////
|
||||
// LibFile: bottlecaps.scad
|
||||
// Bottle caps and necks for PCO18XX standard plastic beverage bottles.
|
||||
// To use, add the following lines to the beginning of your file:
|
||||
// ```
|
||||
// include <BOSL2/std.scad>
|
||||
// include <BOSL2/bottlecaps.scad>
|
||||
// ```
|
||||
//////////////////////////////////////////////////////////////////////
|
||||
|
||||
|
||||
include <knurling.scad>
|
||||
|
||||
|
||||
// Section: PCO-1810 Bottle Threading
|
||||
|
||||
|
||||
// Module: pco1810_neck()
|
||||
// Usage:
|
||||
// pco1810_neck()
|
||||
// Description:
|
||||
// Creates an approximation of a standard PCO-1810 threaded beverage bottle neck.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "tamper-ring" = Centered at the top of the anti-tamper ring channel.
|
||||
// "support-ring" = Centered at the bottom of the support ring.
|
||||
// Example:
|
||||
// pco1810_neck();
|
||||
module pco1810_neck(wall=2, anchor="support-ring", spin=0, orient=UP)
|
||||
{
|
||||
inner_d = 21.74;
|
||||
neck_d = 26.19;
|
||||
neck_h = 5.00;
|
||||
support_d = 33.00;
|
||||
support_width = 1.45;
|
||||
support_rad = 0.40;
|
||||
support_h = 21.00;
|
||||
support_ang = 16;
|
||||
tamper_ring_d = 27.97;
|
||||
tamper_ring_width = 0.50;
|
||||
tamper_ring_r = 1.60;
|
||||
tamper_base_d = 25.71;
|
||||
tamper_base_h = 14.10;
|
||||
threadbase_d = 24.51;
|
||||
thread_pitch = 3.18;
|
||||
thread_angle = 20;
|
||||
thread_od = 27.43;
|
||||
lip_d = 25.07;
|
||||
lip_h = 1.70;
|
||||
lip_leadin_r = 0.20;
|
||||
lip_recess_d = 24.94;
|
||||
lip_recess_h = 1.00;
|
||||
lip_roundover_r = 0.58;
|
||||
|
||||
$fn = segs(support_d/2);
|
||||
h = support_h+neck_h;
|
||||
thread_h = (thread_od-threadbase_d)/2;
|
||||
anchors = [
|
||||
anchorpt("support-ring", [0,0,neck_h-h/2]),
|
||||
anchorpt("tamper-ring", [0,0,h/2-tamper_base_h])
|
||||
];
|
||||
orient_and_anchor([support_d,support_d,h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) {
|
||||
rotate_extrude(convexity=10) {
|
||||
polygon(turtle(
|
||||
state=[inner_d/2,0], [
|
||||
"untilx", neck_d/2,
|
||||
"left", 90,
|
||||
"move", neck_h - 1,
|
||||
"arcright", 1, 90,
|
||||
"untilx", support_d/2-support_rad,
|
||||
"arcleft", support_rad, 90,
|
||||
"move", support_width,
|
||||
"arcleft", support_rad, 90-support_ang,
|
||||
"untilx", tamper_base_d/2,
|
||||
"right", 90-support_ang,
|
||||
"untily", h-tamper_base_h, // Tamper ring holder base.
|
||||
"right", 90,
|
||||
"untilx", tamper_ring_d/2,
|
||||
"left", 90,
|
||||
"move", tamper_ring_width,
|
||||
"arcleft", tamper_ring_r, 90,
|
||||
"untilx", threadbase_d/2,
|
||||
"right", 90,
|
||||
"untily", h-lip_h-lip_leadin_r, // Lip base.
|
||||
"arcright", lip_leadin_r, 90,
|
||||
"untilx", lip_d/2,
|
||||
"left", 90,
|
||||
"untily", h-lip_recess_h,
|
||||
"left", 90,
|
||||
"untilx", lip_recess_d/2,
|
||||
"right", 90,
|
||||
"untily", h-lip_roundover_r,
|
||||
"arcleft", lip_roundover_r, 90,
|
||||
"untilx", inner_d/2
|
||||
]
|
||||
));
|
||||
}
|
||||
up(h-lip_h) {
|
||||
bottom_half() {
|
||||
difference() {
|
||||
thread_helix(
|
||||
base_d=threadbase_d-0.1,
|
||||
pitch=thread_pitch,
|
||||
thread_depth=thread_h+0.1,
|
||||
thread_angle=thread_angle,
|
||||
twist=810,
|
||||
higbee=75,
|
||||
anchor=TOP
|
||||
);
|
||||
zrot_copies(rots=[90,270]) {
|
||||
zrot_copies(rots=[-28,28], r=threadbase_d/2) {
|
||||
prismoid([20,1.82], [20,1.82+2*sin(29)*thread_h], h=thread_h+0.1, anchor=BOT, orient=RIGHT);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Module: pco1810_cap()
|
||||
// Usage:
|
||||
// pco1810_cap(wall, [texture]);
|
||||
// Description:
|
||||
// Creates a basic cap for a PCO1810 threaded beverage bottle.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "inside-top" = Centered on the inside top of the cap.
|
||||
// Examples:
|
||||
// pco1810_cap();
|
||||
// pco1810_cap(texture="knurled");
|
||||
// pco1810_cap(texture="ribbed");
|
||||
module pco1810_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP)
|
||||
{
|
||||
cap_id = 28.58;
|
||||
tamper_ring_h = 14.10;
|
||||
thread_pitch = 3.18;
|
||||
thread_angle = 20;
|
||||
thread_od = cap_id;
|
||||
thread_depth = 1.6;
|
||||
|
||||
$fn = segs(33/2);
|
||||
w = cap_id + 2*wall;
|
||||
h = tamper_ring_h + wall;
|
||||
anchors = [
|
||||
anchorpt("inside-top", [0,0,-(h/2-wall)])
|
||||
];
|
||||
orient_and_anchor([w, w, h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) zrot(45) {
|
||||
difference() {
|
||||
union() {
|
||||
if (texture == "knurled") {
|
||||
knurled_cylinder(d=w, helix=45, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
cyl(d=w-1.5, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
} else if (texture == "ribbed") {
|
||||
zrot_copies(n=30, r=(w-1)/2) {
|
||||
cube([1, 1, tamper_ring_h+wall], anchor=BOTTOM);
|
||||
}
|
||||
cyl(d=w-1, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
} else {
|
||||
cyl(d=w, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
}
|
||||
}
|
||||
up(wall) cyl(d=cap_id, h=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
}
|
||||
up(wall+2) thread_helix(base_d=thread_od-thread_depth*2, pitch=thread_pitch, thread_depth=thread_depth, thread_angle=thread_angle, twist=810, higbee=45, internal=true, anchor=BOTTOM);
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Section: PCO-1881 Bottle Threading
|
||||
|
||||
|
||||
// Module: pco1881_neck()
|
||||
// Usage:
|
||||
// pco1881_neck()
|
||||
// Description:
|
||||
// Creates an approximation of a standard PCO-1881 threaded beverage bottle neck.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "tamper-ring" = Centered at the top of the anti-tamper ring channel.
|
||||
// "support-ring" = Centered at the bottom of the support ring.
|
||||
// Example:
|
||||
// pco1881_neck();
|
||||
module pco1881_neck(wall=2, anchor="support-ring", spin=0, orient=UP)
|
||||
{
|
||||
inner_d = 21.74;
|
||||
neck_d = 26.19;
|
||||
neck_h = 5.00;
|
||||
support_d = 33.00;
|
||||
support_width = 0.58;
|
||||
support_rad = 0.30;
|
||||
support_h = 17.00;
|
||||
support_ang = 15;
|
||||
tamper_ring_d = 28.00;
|
||||
tamper_ring_width = 0.30;
|
||||
tamper_ring_ang = 45;
|
||||
tamper_base_d = 25.71;
|
||||
tamper_base_h = 11.20;
|
||||
tamper_divot_r = 1.08;
|
||||
threadbase_d = 24.20;
|
||||
thread_pitch = 2.70;
|
||||
thread_angle = 15;
|
||||
thread_od = 27.4;
|
||||
lip_d = 25.07;
|
||||
lip_h = 1.70;
|
||||
lip_leadin_r = 0.30;
|
||||
lip_recess_d = 24.94;
|
||||
lip_recess_h = 1.00;
|
||||
lip_roundover_r = 0.58;
|
||||
|
||||
$fn = segs(support_d/2);
|
||||
h = support_h+neck_h;
|
||||
thread_h = (thread_od-threadbase_d)/2;
|
||||
anchors = [
|
||||
anchorpt("support-ring", [0,0,neck_h-h/2]),
|
||||
anchorpt("tamper-ring", [0,0,h/2-tamper_base_h])
|
||||
];
|
||||
orient_and_anchor([support_d,support_d,h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) {
|
||||
rotate_extrude(convexity=10) {
|
||||
polygon(turtle(
|
||||
state=[inner_d/2,0], [
|
||||
"untilx", neck_d/2,
|
||||
"left", 90,
|
||||
"move", neck_h - 1,
|
||||
"arcright", 1, 90,
|
||||
"untilx", support_d/2-support_rad,
|
||||
"arcleft", support_rad, 90,
|
||||
"move", support_width,
|
||||
"arcleft", support_rad, 90-support_ang,
|
||||
"untilx", tamper_base_d/2,
|
||||
"arcright", tamper_divot_r, 180-support_ang*2,
|
||||
"left", 90-support_ang,
|
||||
"untily", h-tamper_base_h, // Tamper ring holder base.
|
||||
"right", 90,
|
||||
"untilx", tamper_ring_d/2,
|
||||
"left", 90,
|
||||
"move", tamper_ring_width,
|
||||
"left", tamper_ring_ang,
|
||||
"untilx", threadbase_d/2,
|
||||
"right", tamper_ring_ang,
|
||||
"untily", h-lip_h-lip_leadin_r, // Lip base.
|
||||
"arcright", lip_leadin_r, 90,
|
||||
"untilx", lip_d/2,
|
||||
"left", 90,
|
||||
"untily", h-lip_recess_h,
|
||||
"left", 90,
|
||||
"untilx", lip_recess_d/2,
|
||||
"right", 90,
|
||||
"untily", h-lip_roundover_r,
|
||||
"arcleft", lip_roundover_r, 90,
|
||||
"untilx", inner_d/2
|
||||
]
|
||||
));
|
||||
}
|
||||
up(h-lip_h) {
|
||||
difference() {
|
||||
thread_helix(
|
||||
base_d=threadbase_d-0.1,
|
||||
pitch=thread_pitch,
|
||||
thread_depth=thread_h+0.1,
|
||||
thread_angle=thread_angle,
|
||||
twist=650,
|
||||
higbee=75,
|
||||
anchor=TOP
|
||||
);
|
||||
zrot_copies(rots=[90,270]) {
|
||||
zrot_copies(rots=[-28,28], r=threadbase_d/2) {
|
||||
prismoid([20,1.82], [20,1.82+2*sin(29)*thread_h], h=thread_h+0.1, anchor=BOT, orient=RIGHT);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Module: pco1881_cap()
|
||||
// Usage:
|
||||
// pco1881_cap(wall, [texture]);
|
||||
// Description:
|
||||
// Creates a basic cap for a PCO1881 threaded beverage bottle.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "inside-top" = Centered on the inside top of the cap.
|
||||
// Examples:
|
||||
// pco1881_cap();
|
||||
// pco1881_cap(texture="knurled");
|
||||
// pco1881_cap(texture="ribbed");
|
||||
module pco1881_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP)
|
||||
{
|
||||
$fn = segs(33/2);
|
||||
w = 28.58 + 2*wall;
|
||||
h = 11.2 + wall;
|
||||
anchors = [
|
||||
anchorpt("inside-top", [0,0,-(h/2-wall)])
|
||||
];
|
||||
orient_and_anchor([w, w, h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) zrot(45) {
|
||||
difference() {
|
||||
union() {
|
||||
if (texture == "knurled") {
|
||||
knurled_cylinder(d=w, helix=45, l=11.2+wall, anchor=BOTTOM);
|
||||
cyl(d=w-1.5, l=11.2+wall, anchor=BOTTOM);
|
||||
} else if (texture == "ribbed") {
|
||||
zrot_copies(n=30, r=(w-1)/2) {
|
||||
cube([1, 1, 11.2+wall], anchor=BOTTOM);
|
||||
}
|
||||
cyl(d=w-1, l=11.2+wall, anchor=BOTTOM);
|
||||
} else {
|
||||
cyl(d=w, l=11.2+wall, anchor=BOTTOM);
|
||||
}
|
||||
}
|
||||
up(wall) cyl(d=28.58, h=11.2+wall, anchor=BOTTOM);
|
||||
}
|
||||
up(wall+2) thread_helix(base_d=25.5, pitch=2.7, thread_depth=1.6, thread_angle=15, twist=650, higbee=45, internal=true, anchor=BOTTOM);
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
// vim: noexpandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap
|
||||
2
std.scad
2
std.scad
|
|
@ -29,8 +29,6 @@ include <shapes2d.scad>
|
|||
include <masks.scad>
|
||||
include <paths.scad>
|
||||
|
||||
include <knurling.scad>
|
||||
|
||||
|
||||
// vim: noexpandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap
|
||||
|
||||
|
|
|
|||
336
threading.scad
336
threading.scad
|
|
@ -904,340 +904,4 @@ module ball_screw_rod(
|
|||
|
||||
|
||||
|
||||
// Section: PCO-1810 Bottle Threading
|
||||
|
||||
|
||||
// Module: pco1810_neck()
|
||||
// Usage:
|
||||
// pco1810_neck()
|
||||
// Description:
|
||||
// Creates an approximation of a standard PCO-1810 threaded beverage bottle neck.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "tamper-ring" = Centered at the top of the anti-tamper ring channel.
|
||||
// "support-ring" = Centered at the bottom of the support ring.
|
||||
// Example:
|
||||
// pco1810_neck();
|
||||
module pco1810_neck(wall=2, anchor="support-ring", spin=0, orient=UP)
|
||||
{
|
||||
inner_d = 21.74;
|
||||
neck_d = 26.19;
|
||||
neck_h = 5.00;
|
||||
support_d = 33.00;
|
||||
support_width = 1.45;
|
||||
support_rad = 0.40;
|
||||
support_h = 21.00;
|
||||
support_ang = 16;
|
||||
tamper_ring_d = 27.97;
|
||||
tamper_ring_width = 0.50;
|
||||
tamper_ring_r = 1.60;
|
||||
tamper_base_d = 25.71;
|
||||
tamper_base_h = 14.10;
|
||||
threadbase_d = 24.51;
|
||||
thread_pitch = 3.18;
|
||||
thread_angle = 20;
|
||||
thread_od = 27.43;
|
||||
lip_d = 25.07;
|
||||
lip_h = 1.70;
|
||||
lip_leadin_r = 0.20;
|
||||
lip_recess_d = 24.94;
|
||||
lip_recess_h = 1.00;
|
||||
lip_roundover_r = 0.58;
|
||||
|
||||
$fn = segs(support_d/2);
|
||||
h = support_h+neck_h;
|
||||
thread_h = (thread_od-threadbase_d)/2;
|
||||
anchors = [
|
||||
anchorpt("support-ring", [0,0,neck_h-h/2]),
|
||||
anchorpt("tamper-ring", [0,0,h/2-tamper_base_h])
|
||||
];
|
||||
orient_and_anchor([support_d,support_d,h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) {
|
||||
rotate_extrude(convexity=10) {
|
||||
polygon(turtle(
|
||||
state=[inner_d/2,0], [
|
||||
"untilx", neck_d/2,
|
||||
"left", 90,
|
||||
"move", neck_h - 1,
|
||||
"arcright", 1, 90,
|
||||
"untilx", support_d/2-support_rad,
|
||||
"arcleft", support_rad, 90,
|
||||
"move", support_width,
|
||||
"arcleft", support_rad, 90-support_ang,
|
||||
"untilx", tamper_base_d/2,
|
||||
"right", 90-support_ang,
|
||||
"untily", h-tamper_base_h, // Tamper ring holder base.
|
||||
"right", 90,
|
||||
"untilx", tamper_ring_d/2,
|
||||
"left", 90,
|
||||
"move", tamper_ring_width,
|
||||
"arcleft", tamper_ring_r, 90,
|
||||
"untilx", threadbase_d/2,
|
||||
"right", 90,
|
||||
"untily", h-lip_h-lip_leadin_r, // Lip base.
|
||||
"arcright", lip_leadin_r, 90,
|
||||
"untilx", lip_d/2,
|
||||
"left", 90,
|
||||
"untily", h-lip_recess_h,
|
||||
"left", 90,
|
||||
"untilx", lip_recess_d/2,
|
||||
"right", 90,
|
||||
"untily", h-lip_roundover_r,
|
||||
"arcleft", lip_roundover_r, 90,
|
||||
"untilx", inner_d/2
|
||||
]
|
||||
));
|
||||
}
|
||||
up(h-lip_h) {
|
||||
bottom_half() {
|
||||
difference() {
|
||||
thread_helix(
|
||||
base_d=threadbase_d-0.1,
|
||||
pitch=thread_pitch,
|
||||
thread_depth=thread_h+0.1,
|
||||
thread_angle=thread_angle,
|
||||
twist=810,
|
||||
higbee=75,
|
||||
anchor=TOP
|
||||
);
|
||||
zrot_copies(rots=[90,270]) {
|
||||
zrot_copies(rots=[-28,28], r=threadbase_d/2) {
|
||||
prismoid([20,1.82], [20,1.82+2*sin(29)*thread_h], h=thread_h+0.1, anchor=BOT, orient=RIGHT);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Module: pco1810_cap()
|
||||
// Usage:
|
||||
// pco1810_cap(wall, [texture]);
|
||||
// Description:
|
||||
// Creates a basic cap for a PCO1810 threaded beverage bottle.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "inside-top" = Centered on the inside top of the cap.
|
||||
// Examples:
|
||||
// pco1810_cap();
|
||||
// pco1810_cap(texture="knurled");
|
||||
// pco1810_cap(texture="ribbed");
|
||||
module pco1810_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP)
|
||||
{
|
||||
cap_id = 28.58;
|
||||
tamper_ring_h = 14.10;
|
||||
thread_pitch = 3.18;
|
||||
thread_angle = 20;
|
||||
thread_od = cap_id;
|
||||
thread_depth = 1.6;
|
||||
|
||||
$fn = segs(33/2);
|
||||
w = cap_id + 2*wall;
|
||||
h = tamper_ring_h + wall;
|
||||
anchors = [
|
||||
anchorpt("inside-top", [0,0,-(h/2-wall)])
|
||||
];
|
||||
orient_and_anchor([w, w, h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) zrot(45) {
|
||||
difference() {
|
||||
union() {
|
||||
if (texture == "knurled") {
|
||||
knurled_cylinder(d=w, helix=45, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
cyl(d=w-1.5, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
} else if (texture == "ribbed") {
|
||||
zrot_copies(n=30, r=(w-1)/2) {
|
||||
cube([1, 1, tamper_ring_h+wall], anchor=BOTTOM);
|
||||
}
|
||||
cyl(d=w-1, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
} else {
|
||||
cyl(d=w, l=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
}
|
||||
}
|
||||
up(wall) cyl(d=cap_id, h=tamper_ring_h+wall, anchor=BOTTOM);
|
||||
}
|
||||
up(wall+2) thread_helix(base_d=thread_od-thread_depth*2, pitch=thread_pitch, thread_depth=thread_depth, thread_angle=thread_angle, twist=810, higbee=45, internal=true, anchor=BOTTOM);
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Section: PCO-1881 Bottle Threading
|
||||
|
||||
|
||||
// Module: pco1881_neck()
|
||||
// Usage:
|
||||
// pco1881_neck()
|
||||
// Description:
|
||||
// Creates an approximation of a standard PCO-1881 threaded beverage bottle neck.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "tamper-ring" = Centered at the top of the anti-tamper ring channel.
|
||||
// "support-ring" = Centered at the bottom of the support ring.
|
||||
// Example:
|
||||
// pco1881_neck();
|
||||
module pco1881_neck(wall=2, anchor="support-ring", spin=0, orient=UP)
|
||||
{
|
||||
inner_d = 21.74;
|
||||
neck_d = 26.19;
|
||||
neck_h = 5.00;
|
||||
support_d = 33.00;
|
||||
support_width = 0.58;
|
||||
support_rad = 0.30;
|
||||
support_h = 17.00;
|
||||
support_ang = 15;
|
||||
tamper_ring_d = 28.00;
|
||||
tamper_ring_width = 0.30;
|
||||
tamper_ring_ang = 45;
|
||||
tamper_base_d = 25.71;
|
||||
tamper_base_h = 11.20;
|
||||
tamper_divot_r = 1.08;
|
||||
threadbase_d = 24.20;
|
||||
thread_pitch = 2.70;
|
||||
thread_angle = 15;
|
||||
thread_od = 27.4;
|
||||
lip_d = 25.07;
|
||||
lip_h = 1.70;
|
||||
lip_leadin_r = 0.30;
|
||||
lip_recess_d = 24.94;
|
||||
lip_recess_h = 1.00;
|
||||
lip_roundover_r = 0.58;
|
||||
|
||||
$fn = segs(support_d/2);
|
||||
h = support_h+neck_h;
|
||||
thread_h = (thread_od-threadbase_d)/2;
|
||||
anchors = [
|
||||
anchorpt("support-ring", [0,0,neck_h-h/2]),
|
||||
anchorpt("tamper-ring", [0,0,h/2-tamper_base_h])
|
||||
];
|
||||
orient_and_anchor([support_d,support_d,h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) {
|
||||
rotate_extrude(convexity=10) {
|
||||
polygon(turtle(
|
||||
state=[inner_d/2,0], [
|
||||
"untilx", neck_d/2,
|
||||
"left", 90,
|
||||
"move", neck_h - 1,
|
||||
"arcright", 1, 90,
|
||||
"untilx", support_d/2-support_rad,
|
||||
"arcleft", support_rad, 90,
|
||||
"move", support_width,
|
||||
"arcleft", support_rad, 90-support_ang,
|
||||
"untilx", tamper_base_d/2,
|
||||
"arcright", tamper_divot_r, 180-support_ang*2,
|
||||
"left", 90-support_ang,
|
||||
"untily", h-tamper_base_h, // Tamper ring holder base.
|
||||
"right", 90,
|
||||
"untilx", tamper_ring_d/2,
|
||||
"left", 90,
|
||||
"move", tamper_ring_width,
|
||||
"left", tamper_ring_ang,
|
||||
"untilx", threadbase_d/2,
|
||||
"right", tamper_ring_ang,
|
||||
"untily", h-lip_h-lip_leadin_r, // Lip base.
|
||||
"arcright", lip_leadin_r, 90,
|
||||
"untilx", lip_d/2,
|
||||
"left", 90,
|
||||
"untily", h-lip_recess_h,
|
||||
"left", 90,
|
||||
"untilx", lip_recess_d/2,
|
||||
"right", 90,
|
||||
"untily", h-lip_roundover_r,
|
||||
"arcleft", lip_roundover_r, 90,
|
||||
"untilx", inner_d/2
|
||||
]
|
||||
));
|
||||
}
|
||||
up(h-lip_h) {
|
||||
difference() {
|
||||
thread_helix(
|
||||
base_d=threadbase_d-0.1,
|
||||
pitch=thread_pitch,
|
||||
thread_depth=thread_h+0.1,
|
||||
thread_angle=thread_angle,
|
||||
twist=650,
|
||||
higbee=75,
|
||||
anchor=TOP
|
||||
);
|
||||
zrot_copies(rots=[90,270]) {
|
||||
zrot_copies(rots=[-28,28], r=threadbase_d/2) {
|
||||
prismoid([20,1.82], [20,1.82+2*sin(29)*thread_h], h=thread_h+0.1, anchor=BOT, orient=RIGHT);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
// Module: pco1881_cap()
|
||||
// Usage:
|
||||
// pco1881_cap(wall, [texture]);
|
||||
// Description:
|
||||
// Creates a basic cap for a PCO1881 threaded beverage bottle.
|
||||
// Arguments:
|
||||
// wall = Wall thickness in mm.
|
||||
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "inside-top" = Centered on the inside top of the cap.
|
||||
// Examples:
|
||||
// pco1881_cap();
|
||||
// pco1881_cap(texture="knurled");
|
||||
// pco1881_cap(texture="ribbed");
|
||||
module pco1881_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP)
|
||||
{
|
||||
$fn = segs(33/2);
|
||||
w = 28.58 + 2*wall;
|
||||
h = 11.2 + wall;
|
||||
anchors = [
|
||||
anchorpt("inside-top", [0,0,-(h/2-wall)])
|
||||
];
|
||||
orient_and_anchor([w, w, h], orient, anchor, spin=spin, anchors=anchors, chain=true) {
|
||||
down(h/2) zrot(45) {
|
||||
difference() {
|
||||
union() {
|
||||
if (texture == "knurled") {
|
||||
knurled_cylinder(d=w, helix=45, l=11.2+wall, anchor=BOTTOM);
|
||||
cyl(d=w-1.5, l=11.2+wall, anchor=BOTTOM);
|
||||
} else if (texture == "ribbed") {
|
||||
zrot_copies(n=30, r=(w-1)/2) {
|
||||
cube([1, 1, 11.2+wall], anchor=BOTTOM);
|
||||
}
|
||||
cyl(d=w-1, l=11.2+wall, anchor=BOTTOM);
|
||||
} else {
|
||||
cyl(d=w, l=11.2+wall, anchor=BOTTOM);
|
||||
}
|
||||
}
|
||||
up(wall) cyl(d=28.58, h=11.2+wall, anchor=BOTTOM);
|
||||
}
|
||||
up(wall+2) thread_helix(base_d=25.5, pitch=2.7, thread_depth=1.6, thread_angle=15, twist=650, higbee=45, internal=true, anchor=BOTTOM);
|
||||
}
|
||||
children();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
||||
// vim: noexpandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap
|
||||
|
|
|
|||
Loading…
Reference in a new issue