From 7b898e8cac8dd6371ba36b98c702f6b3331a8fcf Mon Sep 17 00:00:00 2001 From: Adrian Mariano Date: Thu, 1 Dec 2022 22:09:01 -0500 Subject: [PATCH] fix scale --- shapes3d.scad | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/shapes3d.scad b/shapes3d.scad index a325ff5..bcf6b6d 100644 --- a/shapes3d.scad +++ b/shapes3d.scad @@ -1189,7 +1189,7 @@ function cylinder(h, r1, r2, center, l, r, d, d1, d2, anchor, spin=0, orient=UP) // stroke(arc(cp=[2,10], angle=[0,-30], n=20, r=5), width=.18, endcaps="arrow2"); // stroke(arc(cp=[12,-10], angle=[0,30], n=20, r=5), width=.18, endcaps="arrow2"); // } -// Figure(2D,Big,NoAxes,VPR = [0, 0, 0], VPT = [0,0,0], VPD = 110)): The cone in this example is narrow but has the same slope. With negative chamfers, the angle A=30 degrees is on the outside. The chamfers are again quite different looking. As before, the default will feature two congruent angles, and in this case it happens at the bottom of the cone but not the top. The straight arrows again show the size of the chamfer. +// Figure(2D,Big,NoAxes,VPR = [0, 0, 0], VPT = [0,0,0], VPD = 82)): The cone in this example is narrow but has the same slope. With negative chamfers, the angle A=30 degrees is on the outside. The chamfers are again quite different looking. As before, the default will feature two congruent angles, and in this case it happens at the bottom of the cone but not the top. The straight arrows again show the size of the chamfer. // r1=10-7.5;r2=20-7.5; // color("lightgray") // projection()