grey/BOSL2
1
0
Fork 0
mirror of https://github.com/BelfrySCAD/BOSL2.git synced 2024-12-29 16:29:40 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

doc fix

Browse source
This commit is contained in:
Adrian Mariano 2023-02-17 19:22:29 -05:00
parent 6f2f717604
commit 8247848e82
1 changed files with 7 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
shapes3d.scad
View file

@ -833,6 +833,11 @@ function octahedron(size=1, anchor=CENTER, spin=0, orient=UP) =
// You can only round or chamfer the vertical(ish) edges. For those edges, you can
// specify rounding and/or chamferring per-edge, and for top and bottom, inside and
// outside separately.
// .
// By default if you specify a chamfer or rounding then it applies as specified to the
// outside, and an inside rounding is calculated that will maintain constant width
// if your wall thickness is uniform. If the wall thickness is not uniform, the default
// inside rounding is calculated based on the smaller of the two wall thicknesses.
// Arguments:
// h/l/height/length = The height or length of the rectangular tube. Default: 1
// size = The outer [X,Y] size of the rectangular tube.
@ -851,10 +856,10 @@ function octahedron(size=1, anchor=CENTER, spin=0, orient=UP) =
// chamfer = The chamfer size for the outside edges of the rectangular tube.
// chamfer1 = The chamfer size for the outside bottom corner of the rectangular tube.
// chamfer2 = The chamfer size for the outside top corner of the rectangular tube.
// irounding = The roundover radius for the inside edges of the rectangular tube. Default: See above
// irounding = The roundover radius for the inside edges of the rectangular tube. Default: Computed for uniform wall thickness (see above)
// irounding1 = The roundover radius for the inside bottom corner of the rectangular tube.
// irounding2 = The roundover radius for the inside top corner of the rectangular tube.
// ichamfer = The chamfer size for the inside edges of the rectangular tube. Default: Same as `chamfer`
// ichamfer = The chamfer size for the inside edges of the rectangular tube. Default: Computed for uniform wall thickness (see above)
// ichamfer1 = The chamfer size for the inside bottom corner of the rectangular tube.
// ichamfer2 = The chamfer size for the inside top corner of the rectangular tube.
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `BOTTOM`