grey/BOSL2
1
0
Fork 0
mirror of https://github.com/BelfrySCAD/BOSL2.git synced 2026-01-08 00:09:44 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Merge pull request #1853 from RAMilewski/master

Browse source 
Fix typo in hinges.scad
This commit is contained in:
adrianVmariano 2025-12-09 16:44:47 -05:00 committed by GitHub
commit 961ed6d8ff
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
1 changed files with 1 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
hinges.scad
View file

@ -107,7 +107,7 @@ include <screws.scad>
// cones to interlock the hinge segments. The default cones are 45 degrees; you can set `in_place` to an
// angle from the vertical to adjust the cone angle. (This means larger angles are pointier, and also less likely to print successfully.)
// Use `gap` to adjust the clearance in the hinge
// to get something that separates after printing. When you adjust the cone hangle, higher angles result in a smaller
// to get something that separates after printing. When you adjust the cone angle, higher angles result in a smaller
// clearance where the cones meet for the same gap size, so you can somewhat adjust the tightness of the hinge
// by changing the cone angle. The default cone diameter, which is controlled by `pin_diam` is 1 unit smaller than the knuckle diameter, which should work well
// for larger hinges, but for small hinges you may want to specify a larger `pin_diam`.