From bd33dc1576ab16de869af022dff37674c657482c Mon Sep 17 00:00:00 2001 From: Revar Desmera Date: Tue, 13 Apr 2021 15:16:06 -0700 Subject: [PATCH] Update README.md --- README.md | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/README.md b/README.md index 0247ff7..ae1dde1 100644 --- a/README.md +++ b/README.md @@ -36,17 +36,11 @@ A lot of the features of this library are to allow shorter, easier-to-read, inte [`BOSL2/shapes.scad`](https://github.com/revarbat/BOSL2/wiki/shapes.scad) Examples | Raw OpenSCAD Equivalent ---------------------------------- | ------------------------------- `cube([10,20,30], anchor=BOTTOM);` | `translate([0,0,15]) cube([10,20,30], center=true);` -`cuboid([20,20,30], fillet=5, edges=EDGES_Z_ALL);` | `minkowski() {cube([10,10,20], center=true); sphere(r=5, $fn=32);}` +`cuboid([20,20,30], fillet=5);` | `minkowski() {cube([10,10,20], center=true); sphere(r=5, $fn=32);}` `prismoid([30,40],[20,30],h=10);` | `hull() {translate([0,0,0.005]) cube([30,40,0.01], center=true); translate([0,0,9.995]) cube([20,30,0.01],center=true);}` `xcyl(l=20,d=4);` | `rotate([0,90,0]) cylinder(h=20, d=4, center=true);` `cyl(l=100, d=40, fillet=5);` | `translate([0,0,50]) minkowski() {cylinder(h=90, d=30, center=true); sphere(r=5);}` -[`BOSL2/masks.scad`](https://github.com/revarbat/BOSL2/wiki/masks.scad) Examples | Raw Openscad Equivalent ------------------------------------ | ------------------------------- -`chamfer_mask_z(l=20,chamfer=5);` | `rotate(45) cube([5*sqrt(2), 5*sqrt(2), 20], center=true);` -`fillet_mask_z(l=20,fillet=5);` | `difference() {cube([10,10,20], center=true); for(dx=[-5,5],dy=[-5,5]) translate([dx,dy,0]) cylinder(h=20.1, r=5, center=true);}` -`fillet_hole_mask(r=30,fillet=5);` | `difference() {cube([70,70,10], center=true); translate([0,0,-5]) rotate_extrude(convexity=4) translate([30,0,0]) circle(r=5);}` - ## Documentation The full library docs can be found at https://github.com/revarbat/BOSL2/wiki