Fixes for rect(center=)

.github/workflows/main.yml

@@ -62,3 +62,10 @@ jobs:
         export OPENSCADPATH=$(dirname $GITHUB_WORKSPACE)
         openscad-docsgen -Tmf *.scad
 
+    - name: Checking Tutorials
+      run: |
+        cd $GITHUB_WORKSPACE
+        echo "::add-matcher::.github/openscad_docsgen.json"
+        export OPENSCADPATH=$(dirname $GITHUB_WORKSPACE)
+        openscad-mdimggen -T *.scad
+

attachments.scad

@@ -50,7 +50,7 @@ _ANCHOR_TYPES = ["intersect","hull"];
 //   all based on combinations of unit direction vectors.  You can use these for anchoring and orienting
 //   attachable objects.  You can also them to specify edge sets for rounding or chamfering cuboids,
 //   or for placing edge, face and corner masks.  
-// SubSection: Anchor
+// Subsection: Anchor
 //   Anchoring is specified with the `anchor` argument in most shape modules.  Specifying `anchor`
 //   when creating an object will translate the object so that the anchor point is at the origin
 //   (0,0,0).  Anchoring always occurs before spin and orientation are applied.
@@ -79,20 +79,20 @@ _ANCHOR_TYPES = ["intersect","hull"];
 //   motors have anchors for `"screw1"`, `"screw2"`, etc. to refer to the various screwholes on the
 //   stepper motor shape.  The names, positions, directions, and spins of these anchors are
 //   specific to the object, and are documented when they exist.
-// SubSection: Spin
+// Subsection: Spin
 //   Spin is specified with the `spin` argument in most shape modules.  Specifying a scalar `spin`
 //   when creating an object will rotate the object counter-clockwise around the Z axis by the given
 //   number of degrees.  If given as a 3D vector, the object will be rotated around each of the X, Y, Z
 //   axes by the number of degrees in each component of the vector.  Spin is always applied after
 //   anchoring, and before orientation.  Since spin is applied after anchoring it is not what
 //   you might think of intuitively as spinning the shape.  To do that, apply `zrot()` to the shape before anchoring.  
-// SubSection: Orient
+// Subsection: Orient
 //   Orientation is specified with the `orient` argument in most shape modules.  Specifying `orient`
 //   when creating an object will rotate the object such that the top of the object will be pointed
 //   at the vector direction given in the `orient` argument.  Orientation is always applied after
 //   anchoring and spin.  The constants `UP`, `DOWN`, `FRONT`, `BACK`, `LEFT`, and `RIGHT` can be
 //   added together to form the directional vector for this.  ie: `LEFT+BACK`
-// SubSection: Specifying Directions
+// Subsection: Specifying Directions
 //   You can use direction vectors to specify anchors for objects or to specify edges, faces, and
 //   corners of cubes.  You can simply specify these direction vectors numerically, but another
 //   option is to use named constants for direction vectors.  These constants define unit vectors
@@ -125,7 +125,7 @@ _ANCHOR_TYPES = ["intersect","hull"];
 //   up(.12)move(TOP)atext("TOP",size=.1,h=.01,anchor=RIGHT,orient=FRONT);
 //   move(TOP)atext("UP",size=.1,h=.01,anchor=RIGHT,orient=FRONT);
 //   }
-// SubSection: Specifying Faces
+// Subsection: Specifying Faces
 //   Modules operating on faces accept a list of faces to describe the faces to operate on.  Each
 //   face is given by a vector that points to that face.  Attachments of cuboid objects onto their faces also
 //   work by choosing an attachment face with a single vector in the same manner.  
@@ -142,7 +142,7 @@ _ANCHOR_TYPES = ["intersect","hull"];
 //        _show_cube_faces([LEFT],toplabel=["LEFT"]);  
 //      }  
 //   }
-// SubSection: Specifying Edges
+// Subsection: Specifying Edges
 //   Modules operating on edges use two arguments to describe the edge set they will use: The `edges` argument
 //   is a list of edge set descriptors to include in the edge set, and the `except` argument is a list of
 //   edge set descriptors to remove from the edge set.
@@ -253,7 +253,7 @@ _ANCHOR_TYPES = ["intersect","hull"];
 //    _show_edges(_edges([1,-1,1]),toplabel=["edges=[1,-1,1]"]);             
 //    _show_edges(_edges([TOP,BOT], TOP+RIGHT+FRONT),toplabel=["edges=[TOP,BOT]","except=TOP+RIGHT+FRONT"]); 
 //   }             
-// SubSection: Specifying Corners
+// Subsection: Specifying Corners
 //   Modules operating on corners use two arguments to describe the corner set they will use: The `corners` argument
 //   is a list of corner set descriptors to include in the corner set, and the `except` argument is a list of
 //   corner set descriptors to remove from the corner set.

beziers.scad

@@ -989,8 +989,8 @@ module trace_bezier(bez, width=1, N=3) {
     color("red") move_copies(bez)
       if ($idx % N !=0)
           if (twodim){
-            rect([width/2, width*3],center=true);
+            rect([width/2, width*3]);
-            rect([width*3, width/2],center=true);
+            rect([width*3, width/2]);
           } else {
            zcyl(d=width/2, h=width*3);
            xcyl(d=width/2, h=width*3);

mutators.scad

@@ -640,7 +640,7 @@ module cylindrical_extrude(or, ir, od, id, size=1000, convexity=10, spin=0, orie
                             yflip()
                             intersection() {
                                 left(x) children();
-                                rect([quantup(step,pow(2,-15)),size.y],center=true);
+                                rect([quantup(step,pow(2,-15)),size.y]);
                             }
                         }
                     }

screws.scad

@@ -1240,7 +1240,6 @@ module _rod(spec, length, tolerance, orient=UP, spin=0, anchor=CENTER)
 {
       threadspec = thread_specification(spec, internal=false, tolerance=tolerance);
       echo(d_major_mean = mean(struct_val(threadspec, "d_major")));
-      echo(bolt_profile=_thread_profile(threadspec));
 
       threaded_rod([mean(struct_val(threadspec, "d_minor")),
                     mean(struct_val(threadspec, "d_pitch")),

shapes2d.scad

@@ -112,7 +112,7 @@ module rect(size=1, rounding=0, chamfer=0, anchor=CENTER, spin=0) {
             children();
         }
     } else {
-        pts = rect(size=size, rounding=rounding, chamfer=chamfer, center=true);
+        pts = rect(size=size, rounding=rounding, chamfer=chamfer);
         attachable(anchor, spin, two_d=true, path=pts) {
             polygon(pts);
             children();

vnf.scad

@@ -1070,8 +1070,8 @@ function _triangulate_planar_convex_polygons(polys) =
 //   bent2 = vnf_bend(vnf2, axis="Y");
 //   vnf_polyhedron([bent1,bent2]);
 // Example(3D):
-//   rgn = union(rect([100,20],center=true),
+//   rgn = union(rect([100,20]),
-//               rect([20,100],center=true));
+//               rect([20,100]));
 //   vnf0 = linear_sweep(zrot(45,p=rgn), height=10);
 //   vnf1 = up(50, p=vnf0);
 //   vnf2 = down(50, p=vnf0);
@@ -1080,7 +1080,7 @@ function _triangulate_planar_convex_polygons(polys) =
 //   vnf_polyhedron([bent1,bent2]);
 // Example(3D): Bending Around X Axis.
 //   rgnr = union(
-//       rect([20,100],center=true),
+//       rect([20,100]),
 //       back(50, p=trapezoid(w1=40, w2=0, h=20, anchor=FRONT))
 //   );
 //   vnf0 = xrot(00,p=linear_sweep(rgnr, height=10));
@@ -1090,7 +1090,7 @@ function _triangulate_planar_convex_polygons(polys) =
 //   vnf_polyhedron([bent1]);
 // Example(3D): Bending Around Y Axis.
 //   rgn = union(
-//       rect([20,100],center=true),
+//       rect([20,100]),
 //       back(50, p=trapezoid(w1=40, w2=0, h=20, anchor=FRONT))
 //   );
 //   rgnr = zrot(-90, p=rgn);
@@ -1101,7 +1101,7 @@ function _triangulate_planar_convex_polygons(polys) =
 //   vnf_polyhedron([bent1]);
 // Example(3D): Bending Around Z Axis.
 //   rgn = union(
-//       rect([20,100],center=true),
+//       rect([20,100]),
 //       back(50, p=trapezoid(w1=40, w2=0, h=20, anchor=FRONT))
 //   );
 //   rgnr = zrot(90, p=rgn);