From fd0bcc09030e690c90598d5df317ac05de8a06fd Mon Sep 17 00:00:00 2001 From: Adrian Mariano Date: Thu, 16 Sep 2021 18:32:12 -0400 Subject: [PATCH] rename anchorpt to named_anchor --- attachments.scad | 6 +-- bottlecaps.scad | 16 ++++---- gears.scad | 76 +++++++++++++++++++------------------- linear_bearings.scad | 6 +-- metric_screws.scad | 10 ++--- nema_steppers.scad | 88 ++++++++++++++++++++++---------------------- shapes2d.scad | 24 ++++++------ shapes3d.scad | 6 +-- 8 files changed, 116 insertions(+), 116 deletions(-) diff --git a/attachments.scad b/attachments.scad index 097985b..2f8d89a 100644 --- a/attachments.scad +++ b/attachments.scad @@ -1008,9 +1008,9 @@ module attachable( -// Function: anchorpt() +// Function: named_anchor() // Usage: -// a = anchorpt(name, pos, [orient], [spin]); +// a = named_anchor(name, pos, [orient], [spin]); // Topics: Attachments // See Also: reorient(), attachable() // Description: @@ -1021,7 +1021,7 @@ module attachable( // pos = The [X,Y,Z] position of the anchor. // orient = A vector pointing in the direction parts should project from the anchor position. // spin = If needed, the angle to rotate the part around the direction vector. -function anchorpt(name, pos=[0,0,0], orient=UP, spin=0) = [name, pos, orient, spin]; +function named_anchor(name, pos=[0,0,0], orient=UP, spin=0) = [name, pos, orient, spin]; // Function: reorient() diff --git a/bottlecaps.scad b/bottlecaps.scad index 35aa242..7d88ac0 100644 --- a/bottlecaps.scad +++ b/bottlecaps.scad @@ -67,8 +67,8 @@ module pco1810_neck(wall=2, anchor="support-ring", spin=0, orient=UP) h = support_h+neck_h; thread_h = (thread_od-threadbase_d)/2; anchors = [ - anchorpt("support-ring", [0,0,neck_h-h/2]), - anchorpt("tamper-ring", [0,0,h/2-tamper_base_h]) + named_anchor("support-ring", [0,0,neck_h-h/2]), + named_anchor("tamper-ring", [0,0,h/2-tamper_base_h]) ]; attachable(anchor,spin,orient, d1=neck_d, d2=lip_recess_d+2*lip_leadin_r, l=h, anchors=anchors) { down(h/2) { @@ -173,7 +173,7 @@ module pco1810_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP) w = cap_id + 2*wall; h = tamper_ring_h + wall; anchors = [ - anchorpt("inside-top", [0,0,-(h/2-wall)]) + named_anchor("inside-top", [0,0,-(h/2-wall)]) ]; attachable(anchor,spin,orient, d=w, l=h, anchors=anchors) { down(h/2) zrot(45) { @@ -260,8 +260,8 @@ module pco1881_neck(wall=2, anchor="support-ring", spin=0, orient=UP) h = support_h+neck_h; thread_h = (thread_od-threadbase_d)/2; anchors = [ - anchorpt("support-ring", [0,0,neck_h-h/2]), - anchorpt("tamper-ring", [0,0,h/2-tamper_base_h]) + named_anchor("support-ring", [0,0,neck_h-h/2]), + named_anchor("tamper-ring", [0,0,h/2-tamper_base_h]) ]; attachable(anchor,spin,orient, d1=neck_d, d2=lip_recess_d+2*lip_leadin_r, l=h, anchors=anchors) { down(h/2) { @@ -357,7 +357,7 @@ module pco1881_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP) w = 28.58 + 2*wall; h = 11.2 + wall; anchors = [ - anchorpt("inside-top", [0,0,-(h/2-wall)]) + named_anchor("inside-top", [0,0,-(h/2-wall)]) ]; attachable(anchor,spin,orient, d=w, l=h, anchors=anchors) { down(h/2) zrot(45) { @@ -448,7 +448,7 @@ module generic_bottle_neck( $fn = segs(33 / 2); thread_h = (thread_od - threadbase_d) / 2; anchors = [ - anchorpt("support-ring", [0, 0, 0 - h / 2]) + named_anchor("support-ring", [0, 0, 0 - h / 2]) ]; attachable(anchor, spin, orient, d1 = neck_d, d2 = 0, l = h, anchors = anchors) { down(h / 2) { @@ -563,7 +563,7 @@ module generic_bottle_cap( heightMagMult = (height > 11.2) ? height / 11.2 : 1; anchors = [ - anchorpt("inside-top", [0, 0, -(h / 2 - wall)]) + named_anchor("inside-top", [0, 0, -(h / 2 - wall)]) ]; attachable(anchor, spin, orient, d = w, l = h, anchors = anchors) { down(h / 2) { diff --git a/gears.scad b/gears.scad index 448f209..f44acd7 100644 --- a/gears.scad +++ b/gears.scad @@ -579,12 +579,12 @@ function rack2d( xd = d * sin(pressure_angle), l = teeth * pitch, anchors = [ - anchorpt("adendum", [ 0, a,0], BACK), - anchorpt("adendum-left", [-l/2, a,0], LEFT), - anchorpt("adendum-right", [ l/2, a,0], RIGHT), - anchorpt("dedendum", [ 0,-d,0], BACK), - anchorpt("dedendum-left", [-l/2,-d,0], LEFT), - anchorpt("dedendum-right", [ l/2,-d,0], RIGHT), + named_anchor("adendum", [ 0, a,0], BACK), + named_anchor("adendum-left", [-l/2, a,0], LEFT), + named_anchor("adendum-right", [ l/2, a,0], RIGHT), + named_anchor("dedendum", [ 0,-d,0], BACK), + named_anchor("dedendum-left", [-l/2,-d,0], LEFT), + named_anchor("dedendum-right", [ l/2,-d,0], RIGHT), ], path = [ [-(teeth-1)/2 * pitch + -1/2 * pitch, a-height], @@ -619,12 +619,12 @@ module rack2d( d = dedendum(pitch, clearance); l = teeth * pitch; anchors = [ - anchorpt("adendum", [ 0, a,0], BACK), - anchorpt("adendum-left", [-l/2, a,0], LEFT), - anchorpt("adendum-right", [ l/2, a,0], RIGHT), - anchorpt("dedendum", [ 0,-d,0], BACK), - anchorpt("dedendum-left", [-l/2,-d,0], LEFT), - anchorpt("dedendum-right", [ l/2,-d,0], RIGHT), + named_anchor("adendum", [ 0, a,0], BACK), + named_anchor("adendum-left", [-l/2, a,0], LEFT), + named_anchor("adendum-right", [ l/2, a,0], RIGHT), + named_anchor("dedendum", [ 0,-d,0], BACK), + named_anchor("dedendum-left", [-l/2,-d,0], LEFT), + named_anchor("dedendum-right", [ l/2,-d,0], RIGHT), ]; path = rack2d( pitch = pitch, @@ -994,9 +994,9 @@ function bevel_gear( lvnf = left_handed? vnf1 : xflip(p=vnf1), vnf = down(cpz, p=lvnf), anchors = [ - anchorpt("pitchbase", [0,0,pitchoff-thickness/2]), - anchorpt("flattop", [0,0,thickness/2]), - anchorpt("apex", [0,0,hyp_ang_to_opp(ocone_rad,90-pitch_angle)+pitchoff-thickness/2]) + named_anchor("pitchbase", [0,0,pitchoff-thickness/2]), + named_anchor("flattop", [0,0,thickness/2]), + named_anchor("apex", [0,0,hyp_ang_to_opp(ocone_rad,90-pitch_angle)+pitchoff-thickness/2]) ] ) reorient(anchor,spin,orient, vnf=vnf, extent=true, anchors=anchors, p=vnf); @@ -1048,9 +1048,9 @@ module bevel_gear( axis_zs = [for (p=vnf[0]) if(norm(point2d(p)) < EPSILON) p.z]; thickness = max(axis_zs) - min(axis_zs); anchors = [ - anchorpt("pitchbase", [0,0,pitchoff-thickness/2]), - anchorpt("flattop", [0,0,thickness/2]), - anchorpt("apex", [0,0,adj_ang_to_opp(pr,90-pitch_angle)+pitchoff-thickness/2]) + named_anchor("pitchbase", [0,0,pitchoff-thickness/2]), + named_anchor("flattop", [0,0,thickness/2]), + named_anchor("apex", [0,0,adj_ang_to_opp(pr,90-pitch_angle)+pitchoff-thickness/2]) ]; attachable(anchor,spin,orient, r1=pr, r2=ipr, h=thickness, anchors=anchors) { difference() { @@ -1137,16 +1137,16 @@ module rack( d = dedendum(pitch, clearance); l = teeth * pitch; anchors = [ - anchorpt("adendum", [0,0,a], BACK), - anchorpt("adendum-left", [-l/2,0,a], LEFT), - anchorpt("adendum-right", [ l/2,0,a], RIGHT), - anchorpt("adendum-front", [0,-thickness/2,a], DOWN), - anchorpt("adendum-back", [0, thickness/2,a], UP), - anchorpt("dedendum", [0,0,-d], BACK), - anchorpt("dedendum-left", [-l/2,0,-d], LEFT), - anchorpt("dedendum-right", [ l/2,0,-d], RIGHT), - anchorpt("dedendum-front", [0,-thickness/2,-d], DOWN), - anchorpt("dedendum-back", [0, thickness/2,-d], UP), + named_anchor("adendum", [0,0,a], BACK), + named_anchor("adendum-left", [-l/2,0,a], LEFT), + named_anchor("adendum-right", [ l/2,0,a], RIGHT), + named_anchor("adendum-front", [0,-thickness/2,a], DOWN), + named_anchor("adendum-back", [0, thickness/2,a], UP), + named_anchor("dedendum", [0,0,-d], BACK), + named_anchor("dedendum-left", [-l/2,0,-d], LEFT), + named_anchor("dedendum-right", [ l/2,0,-d], RIGHT), + named_anchor("dedendum-front", [0,-thickness/2,-d], DOWN), + named_anchor("dedendum-back", [0, thickness/2,-d], UP), ]; attachable(anchor,spin,orient, size=[l, thickness, 2*abs(a-height)], anchors=anchors) { skew(sxy=tan(helical)) xrot(90) { @@ -1186,16 +1186,16 @@ function rack( d = dedendum(pitch, clearance), l = teeth * pitch, anchors = [ - anchorpt("adendum", [0,0,a], BACK), - anchorpt("adendum-left", [-l/2,0,a], LEFT), - anchorpt("adendum-right", [ l/2,0,a], RIGHT), - anchorpt("adendum-front", [0,-thickness/2,a], DOWN), - anchorpt("adendum-back", [0, thickness/2,a], UP), - anchorpt("dedendum", [0,0,-d], BACK), - anchorpt("dedendum-left", [-l/2,0,-d], LEFT), - anchorpt("dedendum-right", [ l/2,0,-d], RIGHT), - anchorpt("dedendum-front", [0,-thickness/2,-d], DOWN), - anchorpt("dedendum-back", [0, thickness/2,-d], UP), + named_anchor("adendum", [0,0,a], BACK), + named_anchor("adendum-left", [-l/2,0,a], LEFT), + named_anchor("adendum-right", [ l/2,0,a], RIGHT), + named_anchor("adendum-front", [0,-thickness/2,a], DOWN), + named_anchor("adendum-back", [0, thickness/2,a], UP), + named_anchor("dedendum", [0,0,-d], BACK), + named_anchor("dedendum-left", [-l/2,0,-d], LEFT), + named_anchor("dedendum-right", [ l/2,0,-d], RIGHT), + named_anchor("dedendum-front", [0,-thickness/2,-d], DOWN), + named_anchor("dedendum-back", [0, thickness/2,-d], UP), ], path = rack2d( pitch = pitch, diff --git a/linear_bearings.scad b/linear_bearings.scad index cd7b7d2..ff71a68 100644 --- a/linear_bearings.scad +++ b/linear_bearings.scad @@ -86,9 +86,9 @@ module linear_bearing_housing(d=15, l=24, tab=7, gap=5, wall=3, tabwall=5, screw tabh = tab/2+od/2*sqrt(2)-ogap/2; h = od+tab/2; anchors = [ - anchorpt("axis", [0,0,-tab/2/2]), - anchorpt("screw", [0,2-ogap/2,tabh-tab/2/2],FWD), - anchorpt("nut", [0,ogap/2-2,tabh-tab/2/2],FWD) + named_anchor("axis", [0,0,-tab/2/2]), + named_anchor("screw", [0,2-ogap/2,tabh-tab/2/2],FWD), + named_anchor("nut", [0,ogap/2-2,tabh-tab/2/2],FWD) ]; attachable(anchor,spin,orient, size=[l, od, h], anchors=anchors) { down(tab/2/2) diff --git a/metric_screws.scad b/metric_screws.scad index 73cfa78..c460d79 100644 --- a/metric_screws.scad +++ b/metric_screws.scad @@ -395,8 +395,8 @@ module generic_screw( ) { sides = max(12, segs(screwsize/2)); anchors = [ - anchorpt("countersunk", [0,0,(headlen+screwlen)/2-0.01]), - anchorpt("base", [0,0,-headlen/2+screwlen/2]) + named_anchor("countersunk", [0,0,(headlen+screwlen)/2-0.01]), + named_anchor("base", [0,0,-headlen/2+screwlen/2]) ]; attachable(anchor,spin,orient, d=screwsize, l=headlen+screwlen, anchors=anchors) { down(headlen/2-screwlen/2) { @@ -517,9 +517,9 @@ module metric_bolt( ); anchors = [ - anchorpt("countersunk", [0,0,base+sunklen]), - anchorpt("base", [0,0,base]), - anchorpt("shank", [0,0,base-shank]) + named_anchor("countersunk", [0,0,base+sunklen]), + named_anchor("base", [0,0,base]), + named_anchor("shank", [0,0,base-shank]) ]; //color("silver") diff --git a/nema_steppers.scad b/nema_steppers.scad index d385192..d0653dc 100644 --- a/nema_steppers.scad +++ b/nema_steppers.scad @@ -122,14 +122,14 @@ module nema11_stepper(h=24, shaft=5, shaft_len=20, anchor=TOP, spin=0, orient=UP screw_depth = nema_motor_screw_depth(size); anchors = [ - anchorpt("shaft-top", [0,0,h/2+shaft_len]), - anchorpt("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), - anchorpt("shaft-bottom", [0,0,h/2+plinth_height+0.1]), - anchorpt("plinth-top", [0,0,h/2+plinth_height]), - anchorpt("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), - anchorpt("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("shaft-top", [0,0,h/2+shaft_len]), + named_anchor("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), + named_anchor("shaft-bottom", [0,0,h/2+plinth_height+0.1]), + named_anchor("plinth-top", [0,0,h/2+plinth_height]), + named_anchor("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), ]; attachable(anchor,spin,orient, size=[motor_width, motor_width, h], anchors=anchors) { up(h/2) @@ -187,14 +187,14 @@ module nema14_stepper(h=24, shaft=5, shaft_len=24, anchor=TOP, spin=0, orient=UP screw_depth = nema_motor_screw_depth(size); anchors = [ - anchorpt("shaft-top", [0,0,h/2+shaft_len]), - anchorpt("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), - anchorpt("shaft-bottom", [0,0,h/2+plinth_height+0.1]), - anchorpt("plinth-top", [0,0,h/2+plinth_height]), - anchorpt("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), - anchorpt("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("shaft-top", [0,0,h/2+shaft_len]), + named_anchor("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), + named_anchor("shaft-bottom", [0,0,h/2+plinth_height+0.1]), + named_anchor("plinth-top", [0,0,h/2+plinth_height]), + named_anchor("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), ]; attachable(anchor,spin,orient, size=[motor_width, motor_width, h], anchors=anchors) { up(h/2) @@ -252,14 +252,14 @@ module nema17_stepper(h=34, shaft=5, shaft_len=20, anchor=TOP, spin=0, orient=UP screw_depth = nema_motor_screw_depth(size); anchors = [ - anchorpt("shaft-top", [0,0,h/2+shaft_len]), - anchorpt("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), - anchorpt("shaft-bottom", [0,0,h/2+plinth_height+0.1]), - anchorpt("plinth-top", [0,0,h/2+plinth_height]), - anchorpt("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), - anchorpt("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("shaft-top", [0,0,h/2+shaft_len]), + named_anchor("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), + named_anchor("shaft-bottom", [0,0,h/2+plinth_height+0.1]), + named_anchor("plinth-top", [0,0,h/2+plinth_height]), + named_anchor("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), ]; attachable(anchor,spin,orient, size=[motor_width, motor_width, h], anchors=anchors) { up(h/2) @@ -337,14 +337,14 @@ module nema23_stepper(h=50, shaft=6.35, shaft_len=25, anchor=TOP, spin=0, orient screw_inset = motor_width - screw_spacing + 1; anchors = [ - anchorpt("shaft-top", [0,0,h/2+shaft_len]), - anchorpt("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), - anchorpt("shaft-bottom", [0,0,h/2+plinth_height+0.1]), - anchorpt("plinth-top", [0,0,h/2+plinth_height]), - anchorpt("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), - anchorpt("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("shaft-top", [0,0,h/2+shaft_len]), + named_anchor("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), + named_anchor("shaft-bottom", [0,0,h/2+plinth_height+0.1]), + named_anchor("plinth-top", [0,0,h/2+plinth_height]), + named_anchor("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), ]; attachable(anchor,spin,orient, size=[motor_width, motor_width, h], anchors=anchors) { up(h/2) @@ -404,14 +404,14 @@ module nema34_stepper(h=75, shaft=12.7, shaft_len=32, anchor=TOP, spin=0, orient screw_inset = motor_width - screw_spacing + 1; anchors = [ - anchorpt("shaft-top", [0,0,h/2+shaft_len]), - anchorpt("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), - anchorpt("shaft-bottom", [0,0,h/2+plinth_height+0.1]), - anchorpt("plinth-top", [0,0,h/2+plinth_height]), - anchorpt("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), - anchorpt("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), - anchorpt("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("shaft-top", [0,0,h/2+shaft_len]), + named_anchor("shaft-middle", [0,0,h/2+plinth_height+(shaft_len-plinth_height)/2]), + named_anchor("shaft-bottom", [0,0,h/2+plinth_height+0.1]), + named_anchor("plinth-top", [0,0,h/2+plinth_height]), + named_anchor("screw1", [+screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw2", [-screw_spacing/2, +screw_spacing/2, h/2]), + named_anchor("screw3", [-screw_spacing/2, -screw_spacing/2, h/2]), + named_anchor("screw4", [+screw_spacing/2, -screw_spacing/2, h/2]), ]; attachable(anchor,spin,orient, size=[motor_width, motor_width, h], anchors=anchors) { up(h/2) @@ -472,10 +472,10 @@ module nema_mount_holes(size=17, depth=5, l=5, anchor=CENTER, spin=0, orient=UP) screw_size = nema_motor_screw_size(size)+$slop; anchors = [ - anchorpt("screw1", [+screw_spacing/2, +screw_spacing/2, depth/2]), - anchorpt("screw2", [-screw_spacing/2, +screw_spacing/2, depth/2]), - anchorpt("screw3", [-screw_spacing/2, -screw_spacing/2, depth/2]), - anchorpt("screw4", [+screw_spacing/2, -screw_spacing/2, depth/2]), + named_anchor("screw1", [+screw_spacing/2, +screw_spacing/2, depth/2]), + named_anchor("screw2", [-screw_spacing/2, +screw_spacing/2, depth/2]), + named_anchor("screw3", [-screw_spacing/2, -screw_spacing/2, depth/2]), + named_anchor("screw4", [+screw_spacing/2, -screw_spacing/2, depth/2]), ]; screwfn = quantup(max(8,segs(screw_size/2)),4); plinthfn = quantup(max(8,segs(plinth_diam/2)),4); diff --git a/shapes2d.scad b/shapes2d.scad index 51b70e2..d2d1fbb 100644 --- a/shapes2d.scad +++ b/shapes2d.scad @@ -279,8 +279,8 @@ function regular_ngon(n=6, r, d, or, od, ir, id, side, rounding=0, realign=false tipp = apply(mat, polar_to_xy(r-inset+rounding,a1)), pos = (p1+p2)/2 ) each [ - anchorpt(str("tip",i), tipp, unit(tipp,BACK), 0), - anchorpt(str("side",i), pos, unit(pos,BACK), 0), + named_anchor(str("tip",i), tipp, unit(tipp,BACK), 0), + named_anchor(str("side",i), pos, unit(pos,BACK), 0), ] ] ) reorient(anchor,spin, two_d=true, path=path, extent=false, p=path, anchors=anchors); @@ -308,8 +308,8 @@ module regular_ngon(n=6, r, d, or, od, ir, id, side, rounding=0, realign=false, tipp = apply(mat, polar_to_xy(r-inset+rounding,a1)), pos = (p1+p2)/2 ) each [ - anchorpt(str("tip",i), tipp, unit(tipp,BACK), 0), - anchorpt(str("side",i), pos, unit(pos,BACK), 0), + named_anchor(str("tip",i), tipp, unit(tipp,BACK), 0), + named_anchor(str("side",i), pos, unit(pos,BACK), 0), ] ]; path = regular_ngon(n=n, r=r, rounding=rounding, _mat=mat, _anchs=anchors); @@ -694,9 +694,9 @@ function star(n, r, ir, d, or, od, id, step, realign=false, align_tip, align_pit p3 = apply(mat, polar_to_xy(r,a3)), pos = (p1+p3)/2 ) each [ - anchorpt(str("tip",i), p1, unit(p1,BACK), 0), - anchorpt(str("pit",i), p2, unit(p2,BACK), 0), - anchorpt(str("midpt",i), pos, unit(pos,BACK), 0), + named_anchor(str("tip",i), p1, unit(p1,BACK), 0), + named_anchor(str("pit",i), p2, unit(p2,BACK), 0), + named_anchor(str("midpt",i), pos, unit(pos,BACK), 0), ] ] ) reorient(anchor,spin, two_d=true, path=path, p=path, anchors=anchors); @@ -724,9 +724,9 @@ module star(n, r, ir, d, or, od, id, step, realign=false, align_tip, align_pit, p3 = apply(mat, polar_to_xy(r,a3)), pos = (p1+p3)/2 ) each [ - anchorpt(str("tip",i), p1, unit(p1,BACK), 0), - anchorpt(str("pit",i), p2, unit(p2,BACK), 0), - anchorpt(str("midpt",i), pos, unit(pos,BACK), 0), + named_anchor(str("tip",i), p1, unit(p1,BACK), 0), + named_anchor(str("pit",i), p2, unit(p2,BACK), 0), + named_anchor(str("midpt",i), pos, unit(pos,BACK), 0), ] ]; path = star(n=n, r=r, ir=ir, realign=realign, _mat=mat, _anchs=anchors); @@ -1007,7 +1007,7 @@ module reuleaux_polygon(N=3, r, d, anchor=CENTER, spin=0) { for (i = [0:1:N-1]) let( ca = 360 - i * 360/N, cp = polar_to_xy(r, ca) - ) anchorpt(str("tip",i), cp, unit(cp,BACK), 0), + ) named_anchor(str("tip",i), cp, unit(cp,BACK), 0), ]; attachable(anchor,spin, two_d=true, path=path, anchors=anchors) { polygon(path); @@ -1034,7 +1034,7 @@ function reuleaux_polygon(N=3, r, d, anchor=CENTER, spin=0) = for (i = [0:1:N-1]) let( ca = 360 - i * 360/N, cp = polar_to_xy(r, ca) - ) anchorpt(str("tip",i), cp, unit(cp,BACK), 0), + ) named_anchor(str("tip",i), cp, unit(cp,BACK), 0), ] ) reorient(anchor,spin, two_d=true, path=path, anchors=anchors, p=path); diff --git a/shapes3d.scad b/shapes3d.scad index 6e870a2..bd20892 100644 --- a/shapes3d.scad +++ b/shapes3d.scad @@ -1614,9 +1614,9 @@ module teardrop(h, r, ang=45, cap_h, r1, r2, d, d1, d2, cap_h1, cap_h2, l, ancho cap_h2 = min(first_defined([cap_h2, cap_h, tip_y2]), tip_y2); capvec = unit([0, cap_h1-cap_h2, l]); anchors = [ - anchorpt("cap", [0,0,(cap_h1+cap_h2)/2], capvec), - anchorpt("cap_fwd", [0,-l/2,cap_h1], unit((capvec+FWD)/2)), - anchorpt("cap_back", [0,+l/2,cap_h2], unit((capvec+BACK)/2), 180), + named_anchor("cap", [0,0,(cap_h1+cap_h2)/2], capvec), + named_anchor("cap_fwd", [0,-l/2,cap_h1], unit((capvec+FWD)/2)), + named_anchor("cap_back", [0,+l/2,cap_h2], unit((capvec+BACK)/2), 180), ]; attachable(anchor,spin,orient, r1=r1, r2=r2, l=l, axis=BACK, anchors=anchors) { rot(from=UP,to=FWD) {