////////////////////////////////////////////////////////////////////// // LibFile: metric_screws.scad // Screws, Bolts, and Nuts. // Includes: // include // include // FileGroup: Threaded Parts // FileSummary: Metric screws, nuts, and screwholes. ////////////////////////////////////////////////////////////////////// include include warn = echo("*** WARNING: metric_screws.scad is deprecated and may be removed in the future. Use screws.scad instead. ***"); // Section: Functions // Function: get_metric_bolt_head_size() // Description: Returns the diameter of a typical metric bolt's head, based on the bolt `size`. function get_metric_bolt_head_size(size) = lookup(size, [ [ 3.0, 5.5], [ 4.0, 7.0], [ 5.0, 8.0], [ 6.0, 10.0], [ 7.0, 11.0], [ 8.0, 13.0], [10.0, 17.0], [12.0, 19.0], [14.0, 22.0], [16.0, 24.0], [18.0, 27.0], [20.0, 30.0], [24.0, 36.0], [30.0, 46.0], [36.0, 55.0], [42.0, 65.0], [48.0, 75.0], [56.0, 85.0], [64.0, 95.0] ]); // Function: get_metric_bolt_head_height() // Description: Returns the height of a typical metric bolt's head, based on the bolt `size`. function get_metric_bolt_head_height(size) = lookup(size, [ [ 1.6, 1.23], [ 2.0, 1.53], [ 2.5, 1.83], [ 3.0, 2.13], [ 4.0, 2.93], [ 5.0, 3.65], [ 6.0, 4.15], [ 8.0, 5.45], [10.0, 6.58], [12.0, 7.68], [14.0, 8.98], [16.0, 10.18], [20.0, 12.72], [24.0, 15.35], [30.0, 19.12], [36.0, 22.92], [42.0, 26.42], [48.0, 30.42], [56.0, 35.50], [64.0, 40.50] ]); // Function: get_metric_socket_cap_diam() // Description: Returns the diameter of a typical metric socket cap bolt's head, based on the bolt `size`. function get_metric_socket_cap_diam(size) = lookup(size, [ [ 1.6, 3.0], [ 2.0, 3.8], [ 2.5, 4.5], [ 3.0, 5.5], [ 4.0, 7.0], [ 5.0, 8.5], [ 6.0, 10.0], [ 8.0, 13.0], [10.0, 16.0], [12.0, 18.0], [14.0, 21.0], [16.0, 24.0], [18.0, 27.0], [20.0, 30.0], [22.0, 33.0], [24.0, 36.0], [27.0, 40.0], [30.0, 45.0], [33.0, 50.0], [36.0, 54.0], [42.0, 63.0], [48.0, 72.0], [56.0, 84.0], [64.0, 96.0] ]); // Function: get_metric_socket_cap_height() // Description: Returns the height of a typical metric socket cap bolt's head, based on the bolt `size`. function get_metric_socket_cap_height(size) = lookup(size, [ [ 1.6, 1.7], [ 2.0, 2.0], [ 2.5, 2.5], [ 3.0, 3.0], [ 4.0, 4.0], [ 5.0, 5.0], [ 6.0, 6.0], [ 8.0, 8.0], [10.0, 10.0], [12.0, 12.0], [14.0, 14.0], [16.0, 16.0], [18.0, 18.0], [20.0, 20.0], [22.0, 22.0], [24.0, 24.0], [27.0, 27.0], [30.0, 30.0], [33.0, 33.0], [36.0, 36.0], [42.0, 42.0], [48.0, 48.0], [56.0, 56.0], [64.0, 64.0] ]); // Function: get_metric_socket_cap_socket_size() // Description: Returns the diameter of a typical metric socket cap bolt's hex drive socket, based on the bolt `size`. function get_metric_socket_cap_socket_size(size) = lookup(size, [ [ 1.6, 1.5], [ 2.0, 1.5], [ 2.5, 2.0], [ 3.0, 2.5], [ 4.0, 3.0], [ 5.0, 4.0], [ 6.0, 5.0], [ 8.0, 6.0], [10.0, 8.0], [12.0, 10.0], [14.0, 12.0], [16.0, 14.0], [18.0, 14.0], [20.0, 17.0], [22.0, 17.0], [24.0, 19.0], [27.0, 19.0], [30.0, 22.0], [33.0, 24.0], [36.0, 27.0], [42.0, 32.0], [48.0, 36.0], [56.0, 41.0], [64.0, 46.0] ]); // Function: get_metric_socket_cap_socket_depth() // Description: Returns the depth of a typical metric socket cap bolt's hex drive socket, based on the bolt `size`. function get_metric_socket_cap_socket_depth(size) = lookup(size, [ [ 1.6, 0.7], [ 2.0, 1.0], [ 2.5, 1.1], [ 3.0, 1.3], [ 4.0, 2.0], [ 5.0, 2.5], [ 6.0, 3.0], [ 8.0, 4.0], [10.0, 5.0], [12.0, 6.0], [14.0, 7.0], [16.0, 8.0], [18.0, 9.0], [20.0, 10.0], [22.0, 11.0], [24.0, 12.0], [27.0, 13.5], [30.0, 15.5], [33.0, 18.0], [36.0, 19.0], [42.0, 24.0], [48.0, 28.0], [56.0, 34.0], [64.0, 38.0] ]); // Function: get_metric_iso_coarse_thread_pitch() // Description: Returns the ISO metric standard coarse threading pitch for a given bolt `size`. function get_metric_iso_coarse_thread_pitch(size) = lookup(size, [ [ 1.6, 0.35], [ 2.0, 0.40], [ 2.5, 0.45], [ 3.0, 0.50], [ 4.0, 0.70], [ 5.0, 0.80], [ 6.0, 1.00], [ 7.0, 1.00], [ 8.0, 1.25], [10.0, 1.50], [12.0, 1.75], [14.0, 2.00], [16.0, 2.00], [18.0, 2.50], [20.0, 2.50], [22.0, 2.50], [24.0, 3.00], [27.0, 3.00], [30.0, 3.50], [33.0, 3.50], [36.0, 4.00], [39.0, 4.00], [42.0, 4.50], [45.0, 4.50], [48.0, 5.00], [56.0, 5.50], [64.0, 6.00] ]); // Function: get_metric_iso_fine_thread_pitch() // Description: Returns the ISO metric standard fine threading pitch for a given bolt `size`. function get_metric_iso_fine_thread_pitch(size) = lookup(size, [ [ 1.6, 0.35], [ 2.0, 0.40], [ 2.5, 0.45], [ 3.0, 0.50], [ 4.0, 0.70], [ 5.0, 0.80], [ 6.0, 1.00], [ 7.0, 1.00], [ 8.0, 1.00], [10.0, 1.25], [12.0, 1.50], [14.0, 1.50], [16.0, 2.00], [18.0, 2.50], [20.0, 2.50], [22.0, 2.50], [24.0, 3.00], [27.0, 3.00], [30.0, 3.50], [33.0, 3.50], [36.0, 4.00], [39.0, 4.00], [42.0, 4.50], [45.0, 4.50], [48.0, 5.00], [56.0, 5.50], [64.0, 6.00] ]); // Function: get_metric_iso_superfine_thread_pitch() // Description: Returns the ISO metric standard superfine threading pitch for a given bolt `size`. function get_metric_iso_superfine_thread_pitch(size) = lookup(size, [ [ 1.6, 0.35], [ 2.0, 0.40], [ 2.5, 0.45], [ 3.0, 0.50], [ 4.0, 0.70], [ 5.0, 0.80], [ 6.0, 1.00], [ 7.0, 1.00], [ 8.0, 1.00], [10.0, 1.00], [12.0, 1.25], [14.0, 1.50], [16.0, 2.00], [18.0, 2.50], [20.0, 2.50], [22.0, 2.50], [24.0, 3.00], [27.0, 3.00], [30.0, 3.50], [33.0, 3.50], [36.0, 4.00], [39.0, 4.00], [42.0, 4.50], [45.0, 4.50], [48.0, 5.00], [56.0, 5.50], [64.0, 6.00] ]); // Function: get_metric_jis_thread_pitch() // Description: Returns the JIS metric standard threading pitch for a given bolt `size`. function get_metric_jis_thread_pitch(size) = lookup(size, [ [ 2.0, 0.40], [ 2.5, 0.45], [ 3.0, 0.50], [ 4.0, 0.70], [ 5.0, 0.80], [ 6.0, 1.00], [ 7.0, 1.00], [ 8.0, 1.25], [10.0, 1.25], [12.0, 1.25], [14.0, 1.50], [16.0, 1.50], [18.0, 1.50], [20.0, 1.50] ]); // Function: get_metric_nut_size() // Description: Returns the typical metric nut flat-to-flat diameter for a given bolt `size`. function get_metric_nut_size(size) = lookup(size, [ [ 2.0, 4.0], [ 2.5, 5.0], [ 3.0, 5.5], [ 4.0, 7.0], [ 5.0, 8.0], [ 6.0, 10.0], [ 7.0, 11.0], [ 8.0, 13.0], [10.0, 17.0], [12.0, 19.0], [14.0, 22.0], [16.0, 24.0], [18.0, 27.0], [20.0, 30.0] ]); // Function: get_metric_nut_thickness() // Description: Returns the typical metric nut thickness for a given bolt `size`. function get_metric_nut_thickness(size) = lookup(size, [ [ 1.6, 1.3], [ 2.0, 1.6], [ 2.5, 2.0], [ 3.0, 2.4], [ 4.0, 3.2], [ 5.0, 4.0], [ 6.0, 5.0], [ 7.0, 5.5], [ 8.0, 6.5], [10.0, 8.0], [12.0, 10.0], [14.0, 11.0], [16.0, 13.0], [18.0, 15.0], [20.0, 16.0], [24.0, 21.5], [30.0, 25.6], [36.0, 31.0], [42.0, 34.0], [48.0, 38.0], [56.0, 45.0], [64.0, 51.0] ]); // Section: Modules // Module: generic_screw() // Description: // Makes a very simple screw model, useful for making screwholes. // Usage: // generic_screw(screwsize, screwlen, headsize, headlen) // Arguments: // screwsize = diameter of threaded part of screw. // screwlen = length of threaded part of screw. // headsize = diameter of the screw head. // headlen = length of the screw head. // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // Named Anchors: // "base" = At the base of the head. // "countersunk" = At the head height that would be just barely exposed when countersunk. // Examples: // generic_screw(screwsize=3,screwlen=10,headsize=6,headlen=3, anchor="countersunk"); // generic_screw(screwsize=3,screwlen=10,headsize=6,headlen=3, anchor="base"); // Example(FlatSpin,VPD=75): Standard Anchors // generic_screw(screwsize=3,screwlen=10,headsize=6,headlen=3) // show_anchors(5, custom=false); // Example(FlatSpin,VPD=55): Custom Named Anchors // expose_anchors() // generic_screw(screwsize=3,screwlen=10,headsize=6,headlen=3) // show_anchors(5, std=false); module generic_screw( screwsize=3, screwlen=10, headsize=6, headlen=3, pitch=undef, anchor="base", spin=0, orient=UP ) { sides = max(12, segs(screwsize/2)); anchors = [ named_anchor("countersunk", [0,0,(headlen+screwlen)/2-0.01]), named_anchor("base", [0,0,-headlen/2+screwlen/2]) ]; attachable(anchor,spin,orient, d=screwsize, l=headlen+screwlen, anchors=anchors) { down(headlen/2-screwlen/2) { down(screwlen/2) { if (pitch == undef) { cylinder(r=screwsize/2, h=screwlen+0.05, center=true, $fn=sides); } else { threaded_rod(d=screwsize, l=screwlen+0.05, pitch=pitch, $fn=sides); } } cylinder(r=headsize/2, h=headlen, center=false, $fn=sides*2); } children(); } } // Module: metric_bolt() // Description: // Makes a standard metric screw model. // Arguments: // size = Diameter of threaded part of screw. // headtype = One of `"hex"`, `"pan"`, `"button"`, `"round"`, `"countersunk"`, `"oval"`, `"socket`". Default: `"socket"` // l = Length of screw, except for the head. // shank = Length of unthreaded portion of the shaft. // pitch = If given, render threads of the given pitch. If 0, then no threads. Overrides coarse argument. // details = If true model should be rendered with extra details. (Default: false) // coarse = If true, make coarse threads instead of fine threads. Default = true // flange = Radius of flange beyond the head. Default = 0 (no flange) // phillips = If given, the size of the phillips drive hole to add. (ie: "#1", "#2", or "#3") // torx = If given, the size of the torx drive hole to add. (ie: 10, 20, 30, etc.) // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // Named Anchors: // "base" = At the base of the head. // "countersunk" = At the head height that would be just barely exposed when countersunk. // "shank" = At the bottom start of the unthreaded shank. // Example: Bolt Head Types // ydistribute(40) { // xdistribute(30) { // // Front Row, Left to Right // metric_bolt(headtype="pan", size=10, l=15, details=true, phillips="#2"); // metric_bolt(headtype="button", size=10, l=15, details=true, phillips="#2"); // metric_bolt(headtype="round", size=10, l=15, details=true, phillips="#2"); // } // xdistribute(30) { // // Back Row, Left to Right // metric_bolt(headtype="socket", size=10, l=15, details=true); // metric_bolt(headtype="hex", size=10, l=15, details=true, phillips="#2"); // metric_bolt(headtype="countersunk", size=10, l=15, details=true, phillips="#2"); // metric_bolt(headtype="oval", size=10, l=15, details=true, phillips="#2"); // } // } // Example: Details // metric_bolt(size=10, l=15, details=true, $fn=32); // Example: No Details Except Threads // metric_bolt(size=10, l=15); // Example: No Details, No Threads // metric_bolt(size=10, l=15, pitch=0); // Example: Fine Threads // metric_bolt(size=10, l=15, coarse=false); // Example: Flange // metric_bolt(size=10, l=15, flange=5); // Example: Shank // metric_bolt(size=10, l=25, shank=10); // Example: Hex Head with Phillips // metric_bolt(headtype="hex", size=10, l=15, phillips="#2"); // Example: Hex Head with Torx // metric_bolt(headtype="hex", size=10, l=15, torx=50); // Example(FlatSpin,VPD=100): Standard Anchors // metric_bolt(headtype="oval", size=10, l=15, shank=5, details=true, phillips="#2") // show_anchors(5, custom=false); // Example(FlatSpin,VPD=100): Custom Named Anchors // expose_anchors(0.125) // metric_bolt(headtype="oval", size=10, l=15, shank=5, details=true, phillips="#2") // show_anchors(5, std=false); module metric_bolt( headtype="socket", size=3, l=12, shank=0, pitch=undef, details=false, coarse=true, phillips=undef, torx=undef, flange=0, anchor="base", spin=0, orient=UP ) { D = headtype != "hex"? get_metric_socket_cap_diam(size) : get_metric_bolt_head_size(size); H = headtype == "socket"? get_metric_socket_cap_height(size) : get_metric_bolt_head_height(size); P = coarse? (pitch==undef? get_metric_iso_coarse_thread_pitch(size) : pitch) : (pitch==undef? get_metric_iso_fine_thread_pitch(size) : pitch); tlen = l - min(l, shank); sides = max(12, segs(size/2)); tcirc = D/cos(30); bevtop = (tcirc-D)/2; bevbot = P/2; headlen = ( (headtype == "pan" || headtype == "round" || headtype == "button")? H*0.75 : (headtype == "countersunk")? (D-size)/2 : (headtype == "oval")? ((D-size)/2 + D/2/3) : H ); base = l/2 - headlen/2; sunklen = ( (headtype == "oval")? (D-size)/2 : headlen-0.001 ); anchors = [ named_anchor("countersunk", [0,0,base+sunklen]), named_anchor("base", [0,0,base]), named_anchor("shank", [0,0,base-shank]) ]; //color("silver") attachable(anchor,spin,orient, d=size, l=headlen+l, anchors=anchors) { up(base) { difference() { union() { // Head if (headtype == "hex") { difference() { cylinder(d=tcirc, h=H, $fn=6); // Bevel hex nut top if (details) { up(H-bevtop) { difference() { cube([tcirc+1, tcirc+1, bevtop+0.5], anchor=BOTTOM); down(0.01) cylinder(d1=tcirc, d2=tcirc-bevtop*2, h=bevtop+0.02, center=false); } } } } } else if (headtype == "socket") { sockw = get_metric_socket_cap_socket_size(size); sockd = get_metric_socket_cap_socket_depth(size); difference() { cylinder(d=D, h=H); up(H-sockd) cylinder(h=sockd+0.1, d=sockw/cos(30), $fn=6); if (details) { kcnt = 36; zrot_copies(n=kcnt, r=D/2) up(H/3) cube([PI*D/kcnt/2, PI*D/kcnt/2, H], anchor=BOTTOM); } } } else if (headtype == "pan") { cyl(l=H*0.75, d=D, rounding2=H*0.75/2, anchor=DOWN); } else if (headtype == "round") { top_half(D) zscale(H*0.75/D*2) sphere(d=D); } else if (headtype == "button") { up(H*0.75/3) top_half(D) zscale(H*0.75*2/3/D*2) sphere(d=D); cylinder(d=D, h=H*0.75/3+0.01, center=false); } else if (headtype == "countersunk") { cylinder(h=(D-size)/2, d1=size, d2=D); } else if (headtype == "oval") { up((D-size)/2) top_half(D) zscale(0.333) sphere(d=D); cylinder(h=(D-size)/2, d1=size, d2=D); } // Flange if (flange>0) { up(headtype == "countersunk" || headtype == "oval"? (D-size)/2 : 0) { cylinder(d=D+flange, h=H/8, center=false); up(H/8) cylinder(d1=D+flange, d2=D, h=H/8, center=false); } } // Unthreaded Shank if (tlen < l) { down(l-tlen) cylinder(d=size, h=l-tlen+0.05, center=false, $fn=sides); } // Threads down(l) { difference() { up(tlen/2+0.05) { if (tlen > 0) { if (P > 0) { threaded_rod(d=size, l=tlen+0.05, pitch=P, $fn=sides); } else { cylinder(d=size, h=tlen+0.05, $fn=sides, center=true); } } } // Bevel bottom end of threads if (details) { difference() { down(0.5) cube([size+1, size+1, bevbot+0.5], anchor=BOTTOM); cylinder(d1=size-bevbot*2, d2=size, h=bevbot+0.01, center=false); } } } } } // Phillips drive hole if (headtype != "socket" && phillips != undef) { down(headtype != "hex"? H/6 : 0) { phillips_mask(size=phillips); //, shaft=D); } } // Torx drive hole if (headtype != "socket" && torx != undef) { up(1) torx_mask(size=torx, l=H+0.1, center=false); } } } children(); } } // Module: metric_nut() // Description: // Makes a model of a standard nut for a standard metric screw. // Arguments: // size = standard metric screw size in mm. (Default: 3) // hole = include the hole in the nut. (Default: true) // pitch = pitch of threads in the hole. No threads if not given. // flange = radius of flange beyond the head. Default = 0 (no flange) // details = true if model should be rendered with extra details. (Default: false) // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // center = If true, centers the nut at the origin. If false, sits on top of XY plane. Overrides `anchor` if given. // Example: No details, No Hole. Useful for a mask. // metric_nut(size=10, hole=false); // Example: Hole, with No Threads // metric_nut(size=10, hole=true); // Example: Threads // metric_nut(size=10, hole=true, pitch=1.5); // Example: Details // metric_nut(size=10, hole=true, pitch=1.5, details=true); // Example: Centered // metric_nut(size=10, hole=true, pitch=1.5, details=true, center=true); // Example: Flange // metric_nut(size=10, hole=true, pitch=1.5, flange=3, details=true); module metric_nut( size=3, hole=true, pitch=undef, details=false, flange=0, center, anchor, spin=0, orient=UP ) { H = get_metric_nut_thickness(size); D = get_metric_nut_size(size); boltfn = max(12, segs(size/2)); nutfn = max(12, segs(D/2)); dcirc = D/cos(30); bevtop = (dcirc - D)/2; //color("silver") anchor = get_anchor(anchor,center,BOT,CENTER); attachable(anchor,spin,orient, d=dcirc+flange, l=H) { difference() { union() { difference() { cylinder(d=dcirc, h=H, center=true, $fn=6); if (details) { up(H/2-bevtop) { difference() { cube([dcirc+1, dcirc+1, bevtop+0.5], anchor=BOTTOM); down(0.01) cylinder(d1=dcirc, d2=dcirc-bevtop*2, h=bevtop+0.02, center=false, $fn=nutfn); } } if (flange == 0) { down(H/2) { difference() { down(0.5) cube([dcirc+1, dcirc+1, bevtop+0.5], anchor=BOTTOM); down(0.01) cylinder(d1=dcirc-bevtop*2, d2=dcirc, h=bevtop+0.02, center=false, $fn=nutfn); } } } } } if (flange>0) { down(H/2) { cylinder(d=D+flange, h=H/8, center=false); up(H/8) cylinder(d1=D+flange, d2=D, h=H/8, center=false); } } } if (hole == true) { if (pitch == undef) { cylinder(r=size/2, h=H+0.5, center=true, $fn=boltfn); } else { threaded_rod(d=size, l=H+0.5, pitch=pitch, $fn=boltfn); } } } children(); } } // vim: expandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap