////////////////////////////////////////////////////////////////////// // LibFile: walls.scad // Walls and structural elements that 3D print without support. // Includes: // include // include // FileGroup: Parts // FileSummary: Walls and structural elements that 3D print without support. ////////////////////////////////////////////////////////////////////// include // Section: Walls // Module: sparse_wall() // Synopsis: Makes an open cross-braced rectangular wall. // SynTags: Geom // Topics: FDM Optimized, Walls // See Also: corrugated_wall(), thinning_wall(), thinning_triangle(), narrowing_strut() // // Usage: // sparse_wall(h, l, thick, [maxang=], [strut=], [max_bridge=]) [ATTACHMENTS]; // // Description: // Makes an open rectangular strut with X-shaped cross-bracing, designed to reduce // the need for support material in 3D printing. // // Arguments: // h = height of strut wall. // l = length of strut wall. // thick = thickness of strut wall. // --- // maxang = maximum overhang angle of cross-braces, measured down from vertical. Default: 30 // strut = the width of the cross-braces. Default: 5 // max_bridge = maximum bridging distance between cross-braces. Default: 20 // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // // See Also: corrugated_wall(), thinning_wall() // // Example: Typical Shape // sparse_wall(h=40, l=100, thick=3); // Example: Thinner Strut // sparse_wall(h=40, l=100, thick=3, strut=2); // Example: Larger maxang // sparse_wall(h=40, l=100, thick=3, strut=2, maxang=45); // Example: Longer max_bridge // sparse_wall(h=40, l=100, thick=3, strut=2, maxang=45, max_bridge=30); module sparse_wall(h=50, l=100, thick=4, maxang=30, strut=5, max_bridge=20, anchor=CENTER, spin=0, orient=UP) { zoff = h/2 - strut/2; yoff = l/2 - strut/2; maxhyp = 1.5 * (max_bridge+strut)/2 / sin(maxang); maxz = 2 * maxhyp * cos(maxang); zreps = ceil(2*zoff/maxz); zstep = 2*zoff / zreps; hyp = zstep/2 / cos(maxang); maxy = min(2 * hyp * sin(maxang), max_bridge+strut); yreps = ceil(2*yoff/maxy); size = [thick, l, h]; attachable(anchor,spin,orient, size=size) { yrot(90) { linear_extrude(height=thick, convexity=4*yreps, center=true) { sparse_wall2d([h,l], maxang=maxang, strut=strut, max_bridge=max_bridge); } } children(); } } // Module: sparse_wall2d() // Synopsis: Makes an open cross-braced rectangular wall. // SynTags: Geom // Topics: FDM Optimized, Walls // See Also: sparse_wall(), corrugated_wall(), thinning_wall(), thinning_triangle(), narrowing_strut() // // Usage: // sparse_wall2d(size, [maxang=], [strut=], [max_bridge=]) [ATTACHMENTS]; // // Description: // Makes a 2D open rectangular square with X-shaped cross-bracing, designed to be extruded, to make a strut that reduces // the need for support material in 3D printing. // // Arguments: // size = The `[X,Y]` size of the outer rectangle. // --- // maxang = maximum overhang angle of cross-braces. // strut = the width of the cross-braces. // max_bridge = maximum bridging distance between cross-braces. // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // // See Also: corrugated_wall(), thinning_wall() // // Example: Typical Shape // sparse_wall2d(size=[40,100]); // Example: Thinner Strut // sparse_wall2d(size=[40,100], strut=2); // Example: Larger maxang // sparse_wall2d(size=[40,100], strut=2, maxang=45); // Example: Longer max_bridge // sparse_wall2d(size=[40,100], strut=2, maxang=45, max_bridge=30); module sparse_wall2d(size=[50,100], maxang=30, strut=5, max_bridge=20, anchor=CENTER, spin=0) { h = size.x; l = size.y; zoff = h/2 - strut/2; yoff = l/2 - strut/2; maxhyp = 1.5 * (max_bridge+strut)/2 / sin(maxang); maxz = 2 * maxhyp * cos(maxang); zreps = ceil(2*zoff/maxz); zstep = 2*zoff / zreps; hyp = zstep/2 / cos(maxang); maxy = min(2 * hyp * sin(maxang), max_bridge+strut); yreps = ceil(2*yoff/maxy); ystep = 2*yoff / yreps; ang = atan(ystep/zstep); len = zstep / cos(ang); attachable(anchor,spin, two_d=true, size=size) { union() { difference() { square([h, l], center=true); square([h-2*strut, l-2*strut], center=true); } ycopies(ystep, n=yreps) { xcopies(zstep, n=zreps) { skew(syx=tan(-ang)) square([(h-strut)/zreps, strut/cos(ang)], center=true); skew(syx=tan( ang)) square([(h-strut)/zreps, strut/cos(ang)], center=true); } } } children(); } } // Module: sparse_cuboid() // Synopsis: Makes an open cross-braced cuboid // SynTags: Geom // Topics: FDM Optimized, Walls // See Also: sparse_wall(), corrugated_wall(), thinning_wall(), thinning_triangle(), narrowing_strut(), cuboid() // Usage: // sparse_cuboid(size, [dir], [maxang=], [struct=] // Description: // Makes an open rectangular cuboid with X-shaped cross-bracing to reduce the need for material in 3d printing. // The direction of the cross bracing can be aligned with the X, Y or Z axis. This module can be // used as a drop-in replacement for {{cuboid()}} if you belatedly decide that your model would benefit from // the sparse construction. Note that for Z aligned bracing the max_bridge parameter contrains the gaps that are parallel // to the Y axis, and the angle is measured relative to the X direction. // Arguments: // size = The size of sparse wall, a number or length 3 vector. // dir = direction of holes through the cuboid, must be a vector parallel to the X, Y or Z axes, or one of "X", "Y" or "Z". Default: "Y" // --- // maxang = maximum overhang angle of cross-braces, measured down from vertical. Default: 30 // strut = the width of the cross-braces. Default: 5 // max_bridge = maximum bridging distance between cross-braces. Default: 20 // chamfer = Size of chamfer, inset from sides. Default: No chamfering. // rounding = Radius of the edge rounding. Default: No rounding. // edges = Edges to mask. See [Specifying Edges](attachments.scad#section-specifying-edges). Default: all edges. // except = Edges to explicitly NOT mask. See [Specifying Edges](attachments.scad#section-specifying-edges). Default: No edges. // trimcorners = If true, rounds or chamfers corners where three chamfered/rounded edges meet. Default: `true` // teardrop = If given as a number, rounding around the bottom edge of the cuboid won't exceed this many degrees from vertical. If true, the limit angle is 45 degrees. Default: `false` // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards. See [orient](attachments.scad#subsection-orient). Default: `UP` // Examples: // sparse_cuboid([10,20,30], strut=1); // sparse_cuboid([10,20,30], "Y", strut=1); // sparse_cuboid([10,20,30], UP, strut=1); // sparse_cuboid(30, FWD, strut=2, rounding=2, $fn=24); module sparse_cuboid(size, dir=RIGHT, strut=5, maxang=30, max_bridge=20, chamfer, rounding, edges=EDGES_ALL, except=[], except_edges, trimcorners=true, teardrop=false, anchor=CENTER, spin=0, orient=UP) { size = scalar_vec3(size); dummy1=assert(in_list(dir,["X","Y","Z"]) || is_vector(dir,3), "dir must be a 3-vector or one of \"X\", \"Y\", or \"Z\""); count = len([for(d=dir) if (d!=0) d]); dummy2=assert(is_string(dir) || (count==1 && len(dir)<=3), "vector valued dir must have exactly one non-zero component"); dir = is_string(dir) ? dir : dir.x ? "X" : dir.y ? "Y" : "Z"; attachable(anchor,spin,orient,size=size){ intersection(){ if (dir=="X") sparse_wall(size.z,size.y,size.x,strut=strut,maxang=maxang, max_bridge=max_bridge); else if (dir=="Y") zrot(90) sparse_wall(size.z,size.x,size.y,strut=strut,maxang=maxang, max_bridge=max_bridge); else yrot(90) sparse_wall(size.x,size.y,size.z,strut=strut,maxang=maxang, max_bridge=max_bridge); cuboid(size=size, chamfer=chamfer, rounding=rounding,edges=edges, except=except, except_edges=except_edges, trimcorners=trimcorners, teardrop=teardrop); } children(); } } // Module: hex_panel() // Usage: // hex_panel(shape, wall, spacing, [frame=], [bevel=], [bevel_frame=], [h=|height=|l=|length=], [anchor=], [orient=], [spin=]) // Description: // Produces a panel with a honeycomb interior. The panel consists of a frame containing // a honeycob interior. The frame is laid out in the XY plane with the honeycob interior // and then extruded to the height h. The shape argument defines the outer bounderies of // the frame. // . // The simplest way to define the frame shape is to give a cuboid size as a 3d vector for // the shape argument. The h argument is not allowed in this case. With rectangular frames you can supply the // bevel argument which applies a 45 deg bevel on the specified list of edges. These edges // can be LEFT, RIGHT, FRONT, or BACK to place a bevel the edge facing upward. You can add // BOTTOM, as in LEFT+BOT, to get a bevel that faces down. When beveling a separate beveled frame // is added to the model. You can independently control its thickness by setting `bevel_frame`, which // defaults to the frame thickness. Note also that `frame` and `bevel_frame` can be set to zero // to produce just the honeycomb. // . // The other option is to provide a 2D path as the shape argument. The path must not intersect // itself. You must give the height argument in this case and you cannot give the bevel argument. // The panel is made from a linear extrusion of the specified shape. In this case, anchoring // is done as usual for linear sweeps. The shape appears by default on its base and you can // choose "hull" or "intersect" anchor types. // Arguments: // shape = 3D size vector or a 2D path // strut = thickness of hexagonal bracing // spacing = center-to-center spacing of hex cells in the honeycomb. // -- // frame = width of the frame around the honeycomb. Default: same as strut // bevel = list of edges to bevel on rectangular case when shape is a size vector; allowed options are RIGHT, LEFT, BACK, or FRONT, or those directions with BOTTOM added. Default: [] // bevel_frame = width of the frame applied at bevels. Default: same as frame // h / height / l / length = thickness of the panel when shape is a path // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` for rectangular panels, `"zcenter"` for extrusions. // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // atype = Select "hull", "intersect" anchor types. Default: "hull" // cp = Centerpoint for determining "intersect" anchors or centering the shape. Determintes the base of the anchor vector. Can be "centroid", "mean", "box" or a 3D point. Default: "centroid" // Extra Anchors: // "base" = Anchor to the base of the shape in its native position // "top" = Anchor to the top of the shape in its native position // "zcenter" = Center shape in the Z direction in the native XY position (default) // Anchor Types: // hull = Anchors to the convex hull of the linear sweep of the path, ignoring any end roundings. // intersect = Anchors to the surface of the linear sweep of the path, ignoring any end roundings. // Examples // hex_panel([50, 100, 5], strut=1.5, spacing=10); // hex_panel([50, 100, 5], 1.5, 10, frame = 5); // hex_panel([50, 100, 5], 5, 10.05); // hex_panel([50, 100, 5], 1.5, 20, frame = 5); // hex_panel([50, 100, 5], 1.5, 12, frame = 0); // hex_panel([50, 100, 5], frame = 10, spacing = 20, strut = 4); // hex_panel([50, 100, 10], 1.5, 10, frame = 5, bevel = [LEFT, RIGHT]); // hex_panel([50, 100, 10], 1.5, 10, frame = 5, bevel = [FWD, BACK]); // hex_panel([50, 100, 10], 1.5, 10, frame = 3, bevel = [LEFT, RIGHT, FWD, BACK]); // hex_panel([50, 100, 10], 1.5, 10, frame = 1, bevel = [LEFT, RIGHT, FWD+BOTTOM, BACK+BOTTOM]); // hex_panel([50, 100, 10], 1.5, 10, frame=2, bevel_frame=0, bevel = [FWD, BACK+BOT, RIGHT, LEFT]); // Example: Triangle // s = [[0, -40], [0, 40], [60, 0]]; // hex_panel(s, strut=1.5, spacing=10, h = 10, frame = 5); // Example: Concave polygon // s = [[0, -40], [0, 70], [60, 0], [80, 20], [70, -20]]; // hex_panel(s, 1.5, 10, h = 10, frame = 5); // Example: Another concave example // s = [[0, -40], [0, 40], [30, 20], [60, 40], [60, -40], [30, -20]]; // hex_panel(s, 1.5, 10, h = 10, frame = 5); // Example: Circular panel // hex_panel(circle(30), 1.5, 10, h = 10, frame = 5); // Example: More complicated shape // s = glued_circles(d=50, spread=50, tangent=30); // hex_panel(s, 1.5, 10, h = 10, frame = 5); // Example: Care is required when arranging panels vertically for 3d printability. Setting `orient=RIGHT` produces the correct result. // hex_panel([50, 100, 10], 1.5, 10, frame = 5, bevel = [FWD, BACK], anchor = BACK + RIGHT + BOTTOM, orient = RIGHT); // zrot(-90)hex_panel([50, 100, 10], 1.5, 10, frame = 5, bevel = [FWD, BACK], anchor = FWD + RIGHT + BOTTOM, orient = RIGHT); // Example: In this example panels one of the panels is positioned with `orient=FWD` which produces hexagons with 60 deg overhang edges that may not be 3d printable. This example alsu uses `bevel_frame` to thin the material at the corner. // hex_panel([50, 100, 10], 1.5, 10, frame = 5, bevel_frame=1, bevel = [FWD, BACK], anchor = BACK + RIGHT + BOTTOM, orient = RIGHT); // hex_panel([100, 50, 10], 1.5, 10, frame = 5, bevel_frame=1, bevel = [LEFT, RIGHT], anchor = FWD + LEFT + BOTTOM, orient = FWD); // Example: Joining panels with {{attach()}}. In this case panels were joined front beveled edge to back beveled edge, which means the hex structure doesn't align at the joint // hex_panel([50, 100, 10], 1.5, 10, frame = 5, bevel_frame=0, bevel = [FWD, BACK], anchor = BACK + RIGHT + BOTTOM, orient = RIGHT) // attach(BACK,FRONT) // hex_panel([50, 100, 10], 1.5, 10, frame = 5, bevel_frame=0, bevel = [FWD, BACK]); // Example: Joining panels with {{attach()}}. Attaching BACK to BACK aligns the hex structure which looks better. // hex_panel([50, 100, 10], 1.5, 10, frame = 1, bevel = [FWD, BACK], anchor = BACK + RIGHT + BOTTOM, orient = RIGHT) // attach(BACK,BACK) // hex_panel([50, 100, 10], 1.5, 10, frame = 1, bevel = [FWD, BACK]); module hex_panel( shape, strut, spacing, frame, bevel_frame, h, height, l, length, bevel = [], anchor, orient = UP, cp="centroid", atype="hull", spin = 0) { frame = first_defined([frame,strut]); bevel_frame = first_defined([bevel_frame, frame]); shape = force_path(shape,"shape"); bevel = is_vector(bevel) ? [bevel] : bevel; bevOK = len([for(bev=bevel) if (norm([bev.x,bev.y])==1 && (bev.x==0 || bev.y==0) && (bev.z==0 || bev.z==-1)) 1]) == len(bevel); dummy= assert(is_finite(strut) && strut > 0, "strut must be positive") assert(is_finite(frame) && frame >= 0, "frame must be nonnegative") assert(is_finite(bevel_frame) && bevel_frame >= 0, "bevel_frame must be nonnegative") assert(is_finite(spacing) && spacing>0, "spacing must be positive") assert(is_path(shape,2) || is_vector(shape, 3), "shape must be a path or a 3D vector") assert(len(bevel) == 0 || is_vector(shape, 3), "bevel must be used only on rectangular panels") assert(is_path(shape) || all_positive(shape), "when shape is a size vector all components must be positive") assert(bevOK, "bevel list contains an invalid entry") assert(!(in_list(FRONT, bevel) && in_list(FRONT+BOTTOM, bevel)), "conflicting FRONT bevels") assert(!(in_list(BACK, bevel) && in_list(BACK+BOTTOM, bevel)), "conflicting BACK bevels") assert(!(in_list(RIGHT, bevel) && in_list(RIGHT+BOTTOM, bevel)), "conflicting RIGHT bevels") assert(!(in_list(LEFT, bevel) && in_list(LEFT+BOTTOM, bevel)), "conflicting LEFT bevels") assert(is_undef(h) || is_path(shape), "cannot give h with a size vector"); shp = is_path(shape) ? shape : square([shape.x, shape.y], center = true); ht = is_path(shape) ? one_defined([h,l,height,length],"height,length,l,h") : shape.z; bounds = pointlist_bounds(shp); sizes = bounds[1] - bounds[0]; // [xsize, ysize] assert(frame*2 + spacing < sizes[0], "There must be room for at least 1 cell in the honeycomb"); assert(frame*2 + spacing < sizes[1], "There must be room for at least 1 cell in the honeycomb"); bevpaths = len(bevel)==0 ? [] : _bevelSolid(shape,bevel); if (len(bevel) > 0) { size1 = [bevpaths[0][0].x-bevpaths[0][1].x, bevpaths[0][2].y-bevpaths[0][1].y,ht]; size2 = [bevpaths[1][0].x-bevpaths[1][1].x, bevpaths[1][2].y-bevpaths[1][1].y]; shift = point2d(centroid(bevpaths[1])-centroid(bevpaths[0])); offset = (centroid(bevpaths[0])); attachable(anchor,spin,orient,size=size1,size2=size2,shift=shift,offset=offset){ down(ht/2) intersection() { union() { linear_extrude(height = ht, convexity=8) { _honeycomb(shp, spacing = spacing, hex_wall = strut); offset_stroke(shp, width=[-frame, 0], closed=true); } for (b = bevel) _bevelWall(shape, b, bevel_frame); } vnf_polyhedron(vnf_vertex_array(bevpaths, col_wrap=true, caps=true)); } children(); } } else if (is_vector(shape)){ attachable(anchor = anchor, spin = spin, orient = orient, size = shape) { down(ht/2) linear_extrude(height = ht, convexity=8) { _honeycomb(shp, spacing = spacing, hex_wall = strut); offset_stroke(shp, width=[-frame, 0], closed=true); } children(); } } else { anchors = [ named_anchor("zcenter", [0,0,0], UP), named_anchor("base", [0,0,-ht/2], UP), named_anchor("top", [0,0,ht/2], UP) ]; attachable(anchor = default(anchor,"zcenter"), spin = spin, orient = orient, path=shp, h=ht, cp=cp, extent=atype=="hull",anchors=anchors) { down(ht/2) linear_extrude(height = ht, convexity=8) { _honeycomb(shp, spacing = spacing, hex_wall = strut); offset_stroke(shp, width=[-frame, 0], closed=true); } children(); } } } module _honeycomb(shape, spacing=10, hex_wall=1) { hex = hexagon(id=spacing-hex_wall, spin=180/6); bounds = pointlist_bounds(shape); size = bounds[1] - bounds[0]; hex_rgn2 = grid_copies(spacing=spacing, size=size, stagger=true, p=hex); center = (bounds[0] + bounds[1]) / 2; hex_rgn = move(center, p=hex_rgn2); difference(){ polygon(shape); region(hex_rgn); } } function _bevelSolid(shape, bevel) = let( tX = in_list(RIGHT, bevel) ? -shape.z : 0, tx = in_list(LEFT, bevel) ? shape.z : 0, tY = in_list(BACK, bevel) ? -shape.z : 0, ty = in_list(FRONT, bevel) ? shape.z : 0, bX = in_list(RIGHT + BOTTOM, bevel) ? -shape.z : 0, bx = in_list(LEFT + BOTTOM, bevel) ? shape.z : 0, bY = in_list(BACK + BOTTOM, bevel) ? -shape.z : 0, by = in_list(FRONT + BOTTOM, bevel) ? shape.z : 0, pathB = path3d(rect(select(shape,0,1)) + [[bX,by],[bx,by],[bx,bY],[bX,bY]]), pathT = path3d(rect(select(shape,0,1)) + [[tX,ty],[tx,ty],[tx,tY],[tX,tY]],shape.z) ) [pathB,pathT]; module _bevelWall(shape, bevel, thickness) { l = bevel.y != 0 ? shape.x : shape.y; d = bevel.y != 0 ? shape.y : shape.x; zr = bevel.y == -1 ? 180 : bevel.y == 1 ? 0 : bevel.x == -1 ? 90 : bevel.x == 1 ? 270 : undef; xr = bevel.x != 0 && bevel.z < 0 ? 180 : 0; yr = bevel.y != 0 && bevel.z < 0 ? 180 : 0; path = [[-thickness, 0], [0, 0], [-shape.z, -shape.z], [-shape.z-thickness, -shape.z]]; up(shape.z/2) xrot(xr) yrot(yr) zrot(zr) down(shape.z/2) back(d/2) right(l/2) zrot(90) xrot(-90) linear_extrude(l) polygon(path); } // Module: corrugated_wall() // Synopsis: Makes a corrugated rectangular wall. // SynTags: Geom // Topics: FDM Optimized, Walls // See Also: sparse_wall(), corrugated_wall(), thinning_wall(), thinning_triangle(), narrowing_strut() // // Usage: // corrugated_wall(h, l, thick, [strut=], [wall=]) [ATTACHMENTS]; // // Description: // Makes a corrugated wall which relieves contraction stress while still // providing support strength. Designed with 3D printing in mind. // // Arguments: // h = height of strut wall. // l = length of strut wall. // thick = thickness of strut wall. // --- // strut = the width of the frame. // wall = thickness of corrugations. // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // // See Also: sparse_wall(), thinning_wall() // // Example: Typical Shape // corrugated_wall(h=50, l=100); // Example: Wider Strut // corrugated_wall(h=50, l=100, strut=8); // Example: Thicker Wall // corrugated_wall(h=50, l=100, strut=8, wall=3); module corrugated_wall(h=50, l=100, thick=5, strut=5, wall=2, anchor=CENTER, spin=0, orient=UP) { amplitude = (thick - wall) / 2; period = min(15, thick * 2); steps = quantup(segs(thick/2),4); step = period/steps; il = l - 2*strut + 2*step; size = [thick, l, h]; attachable(anchor,spin,orient, size=size) { union() { linear_extrude(height=h-2*strut+0.1, slices=2, convexity=ceil(2*il/period), center=true) { polygon( points=concat( [for (y=[-il/2:step:il/2]) [amplitude*sin(y/period*360)-wall/2, y] ], [for (y=[il/2:-step:-il/2]) [amplitude*sin(y/period*360)+wall/2, y] ] ) ); } difference() { cube([thick, l, h], center=true); cube([thick+0.5, l-2*strut, h-2*strut], center=true); } } children(); } } // Module: thinning_wall() // Synopsis: Makes a rectangular wall with a thin middle. // SynTags: Geom // Topics: FDM Optimized, Walls // See Also: sparse_wall(), corrugated_wall(), thinning_wall(), thinning_triangle(), narrowing_strut() // // Usage: // thinning_wall(h, l, thick, [ang=], [braces=], [strut=], [wall=]) [ATTACHMENTS]; // // Description: // Makes a rectangular wall which thins to a smaller width in the center, // with angled supports to prevent critical overhangs. // // Arguments: // h = Height of wall. // l = Length of wall. If given as a vector of two numbers, specifies bottom and top lengths, respectively. // thick = Thickness of wall. // --- // ang = Maximum overhang angle of diagonal brace. // braces = If true, adds diagonal crossbraces for strength. // strut = The width of the borders and diagonal braces. Default: `thick/2` // wall = The thickness of the thinned portion of the wall. Default: `thick/2` // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // // See Also: sparse_wall(), corrugated_wall(), thinning_triangle() // // Example: Typical Shape // thinning_wall(h=50, l=80, thick=4); // Example: Trapezoidal // thinning_wall(h=50, l=[80,50], thick=4); // Example: Trapezoidal with Braces // thinning_wall(h=50, l=[80,50], thick=4, strut=4, wall=2, braces=true); module thinning_wall(h=50, l=100, thick=5, ang=30, braces=false, strut, wall, anchor=CENTER, spin=0, orient=UP) { l1 = (l[0] == undef)? l : l[0]; l2 = (l[1] == undef)? l : l[1]; strut = is_num(strut)? strut : min(h,l1,l2,thick)/2; wall = is_num(wall)? wall : thick/2; bevel_h = strut + (thick-wall)/2/tan(ang); cp1 = circle_2tangents(strut, [0,0,+h/2], [l2/2,0,+h/2], [l1/2,0,-h/2])[0]; cp2 = circle_2tangents(bevel_h, [0,0,+h/2], [l2/2,0,+h/2], [l1/2,0,-h/2])[0]; cp3 = circle_2tangents(bevel_h, [0,0,-h/2], [l1/2,0,-h/2], [l2/2,0,+h/2])[0]; cp4 = circle_2tangents(strut, [0,0,-h/2], [l1/2,0,-h/2], [l2/2,0,+h/2])[0]; z1 = h/2; z2 = cp1.z; z3 = cp2.z; x1 = l2/2; x2 = cp1.x; x3 = cp2.x; x4 = l1/2; x5 = cp4.x; x6 = cp3.x; y1 = thick/2; y2 = wall/2; corner1 = [ x2, 0, z2]; corner2 = [-x5, 0, -z2]; brace_len = norm(corner1-corner2); size = [l1, thick, h]; attachable(anchor,spin,orient, size=size, size2=[l2,thick]) { zrot(90) { polyhedron( points=[ [-x4, -y1, -z1], [ x4, -y1, -z1], [ x1, -y1, z1], [-x1, -y1, z1], [-x5, -y1, -z2], [ x5, -y1, -z2], [ x2, -y1, z2], [-x2, -y1, z2], [-x6, -y2, -z3], [ x6, -y2, -z3], [ x3, -y2, z3], [-x3, -y2, z3], [-x4, y1, -z1], [ x4, y1, -z1], [ x1, y1, z1], [-x1, y1, z1], [-x5, y1, -z2], [ x5, y1, -z2], [ x2, y1, z2], [-x2, y1, z2], [-x6, y2, -z3], [ x6, y2, -z3], [ x3, y2, z3], [-x3, y2, z3], ], faces=[ [ 4, 5, 1], [ 5, 6, 2], [ 6, 7, 3], [ 7, 4, 0], [ 4, 1, 0], [ 5, 2, 1], [ 6, 3, 2], [ 7, 0, 3], [ 8, 9, 5], [ 9, 10, 6], [10, 11, 7], [11, 8, 4], [ 8, 5, 4], [ 9, 6, 5], [10, 7, 6], [11, 4, 7], [11, 10, 9], [20, 21, 22], [11, 9, 8], [20, 22, 23], [16, 17, 21], [17, 18, 22], [18, 19, 23], [19, 16, 20], [16, 21, 20], [17, 22, 21], [18, 23, 22], [19, 20, 23], [12, 13, 17], [13, 14, 18], [14, 15, 19], [15, 12, 16], [12, 17, 16], [13, 18, 17], [14, 19, 18], [15, 16, 19], [ 0, 1, 13], [ 1, 2, 14], [ 2, 3, 15], [ 3, 0, 12], [ 0, 13, 12], [ 1, 14, 13], [ 2, 15, 14], [ 3, 12, 15], ], convexity=6 ); if(braces) { bracepath = [ [-strut*0.33,thick/2], [ strut*0.33,thick/2], [ strut*0.33+(thick-wall)/2/tan(ang), wall/2], [ strut*0.33+(thick-wall)/2/tan(ang),-wall/2], [ strut*0.33,-thick/2], [-strut*0.33,-thick/2], [-strut*0.33-(thick-wall)/2/tan(ang),-wall/2], [-strut*0.33-(thick-wall)/2/tan(ang), wall/2] ]; xflip_copy() { intersection() { extrude_from_to(corner1,corner2) { polygon(bracepath); } prismoid([l1,thick],[l2,thick],h=h,anchor=CENTER); } } } } children(); } } // Module: thinning_triangle() // Synopsis: Makes a triangular wall with a thin middle. // SynTags: Geom // Topics: FDM Optimized, Walls // See Also: sparse_wall(), corrugated_wall(), thinning_wall(), thinning_triangle(), narrowing_strut() // // Usage: // thinning_triangle(h, l, thick, [ang=], [strut=], [wall=], [diagonly=], [center=]) [ATTACHMENTS]; // // Description: // Makes a triangular wall with thick edges, which thins to a smaller width in // the center, with angled supports to prevent critical overhangs. // // Arguments: // h = height of wall. // l = length of wall. // thick = thickness of wall. // --- // ang = maximum overhang angle of diagonal brace. // strut = the width of the diagonal brace. // wall = the thickness of the thinned portion of the wall. // diagonly = boolean, which denotes only the diagonal side (hypotenuse) should be thick. // center = If true, centers shape. If false, overrides `anchor` with `UP+BACK`. // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // // See Also: thinning_wall() // // Example: Centered // thinning_triangle(h=50, l=80, thick=4, ang=30, strut=5, wall=2, center=true); // Example: All Braces // thinning_triangle(h=50, l=80, thick=4, ang=30, strut=5, wall=2, center=false); // Example: Diagonal Brace Only // thinning_triangle(h=50, l=80, thick=4, ang=30, strut=5, wall=2, diagonly=true, center=false); module thinning_triangle(h=50, l=100, thick=5, ang=30, strut=5, wall=3, diagonly=false, center, anchor, spin=0, orient=UP) { dang = atan(h/l); dlen = h/sin(dang); size = [thick, l, h]; anchor = get_anchor(anchor, center, BOT+FRONT, CENTER); attachable(anchor,spin,orient, size=size) { difference() { union() { if (!diagonly) { translate([0, 0, -h/2]) narrowing_strut(w=thick, l=l, wall=strut, ang=ang); translate([0, -l/2, 0]) xrot(-90) narrowing_strut(w=thick, l=h-0.1, wall=strut, ang=ang); } intersection() { cube(size=[thick, l, h], center=true); xrot(-dang) yrot(180) { narrowing_strut(w=thick, l=dlen*1.2, wall=strut, ang=ang); } } cube(size=[wall, l-0.1, h-0.1], center=true); } xrot(-dang) { translate([0, 0, h/2]) { cube(size=[thick+0.1, l*2, h], center=true); } } } children(); } } // Module: narrowing_strut() // Synopsis: Makes a strut like an extruded baseball home plate. // SynTags: Geom // Topics: FDM Optimized // See Also: sparse_wall(), corrugated_wall(), thinning_wall(), thinning_triangle(), narrowing_strut() // // Usage: // narrowing_strut(w, l, wall, [ang=]) [ATTACHMENTS]; // // Description: // Makes a rectangular strut with the top side narrowing in a triangle. // The shape created may be likened to an extruded home plate from baseball. // This is useful for constructing parts that minimize the need to support // overhangs. // // Arguments: // w = Width (thickness) of the strut. // l = Length of the strut. // wall = height of rectangular portion of the strut. // --- // ang = angle that the trianglar side will converge at. // anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#subsection-anchor). Default: `CENTER` // spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#subsection-spin). Default: `0` // orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#subsection-orient). Default: `UP` // // Example: // narrowing_strut(w=10, l=100, wall=5, ang=30); module narrowing_strut(w=10, l=100, wall=5, ang=30, anchor=BOTTOM, spin=0, orient=UP) { h = wall + w/2/tan(ang); size = [w, l, h]; attachable(anchor,spin,orient, size=size) { xrot(90) fwd(h/2) { linear_extrude(height=l, center=true, slices=2) { back(wall/2) square([w, wall], center=true); back(wall-0.001) { yscale(1/tan(ang)) { difference() { zrot(45) square(w/sqrt(2), center=true); fwd(w/2) square(w, center=true); } } } } } children(); } } // vim: expandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap