//////////////////////////////////////////////////////////////////////
// LibFile: bottlecaps.scad
// Bottle caps and necks for PCO18XX standard plastic beverage bottles.
// Includes:
// include <BOSL2/std.scad>
// include <BOSL2/bottlecaps.scad>
//////////////////////////////////////////////////////////////////////
include <threading.scad>
include <knurling.scad>
// Section: PCO-1810 Bottle Threading
// Module: pco1810_neck()
// Usage:
// pco1810_neck(<wall>)
// Description:
// Creates an approximation of a standard PCO-1810 threaded beverage bottle neck.
// Arguments:
// wall = Wall thickness in mm.
// ---
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
// Extra Anchors:
// "tamper-ring" = Centered at the top of the anti-tamper ring channel.
// "support-ring" = Centered at the bottom of the support ring.
// Example:
// pco1810_neck();
// Example: Standard Anchors
// pco1810_neck() show_anchors(custom=false);
// Example: Custom Named Anchors
// expose_anchors(0.3)
// pco1810_neck()
// show_anchors(std=false);
module pco1810_neck(wall=2, anchor="support-ring", spin=0, orient=UP)
{
inner_d = 21.74;
neck_d = 26.19;
neck_h = 5.00;
support_d = 33.00;
support_width = 1.45;
support_rad = 0.40;
support_h = 21.00;
support_ang = 16;
tamper_ring_d = 27.97;
tamper_ring_width = 0.50;
tamper_ring_r = 1.60;
tamper_base_d = 25.71;
tamper_base_h = 14.10;
threadbase_d = 24.51;
thread_pitch = 3.18;
thread_angle = 20;
thread_od = 27.43;
lip_d = 25.07;
lip_h = 1.70;
lip_leadin_r = 0.20;
lip_recess_d = 24.94;
lip_recess_h = 1.00;
lip_roundover_r = 0.58;
$fn = segs(support_d/2);
h = support_h+neck_h;
thread_h = (thread_od-threadbase_d)/2;
anchors = [
anchorpt("support-ring", [0,0,neck_h-h/2]),
anchorpt("tamper-ring", [0,0,h/2-tamper_base_h])
];
attachable(anchor,spin,orient, d1=neck_d, d2=lip_recess_d+2*lip_leadin_r, l=h, anchors=anchors) {
down(h/2) {
rotate_extrude(convexity=10) {
polygon(turtle(
state=[inner_d/2,0], [
"untilx", neck_d/2,
"left", 90,
"move", neck_h - 1,
"arcright", 1, 90,
"untilx", support_d/2-support_rad,
"arcleft", support_rad, 90,
"move", support_width,
"arcleft", support_rad, 90-support_ang,
"untilx", tamper_base_d/2,
"right", 90-support_ang,
"untily", h-tamper_base_h, // Tamper ring holder base.
"right", 90,
"untilx", tamper_ring_d/2,
"left", 90,
"move", tamper_ring_width,
"arcleft", tamper_ring_r, 90,
"untilx", threadbase_d/2,
"right", 90,
"untily", h-lip_h-lip_leadin_r, // Lip base.
"arcright", lip_leadin_r, 90,
"untilx", lip_d/2,
"left", 90,
"untily", h-lip_recess_h,
"left", 90,
"untilx", lip_recess_d/2,
"right", 90,
"untily", h-lip_roundover_r,
"arcleft", lip_roundover_r, 90,
"untilx", inner_d/2
]
));
}
up(h-lip_h) {
bottom_half() {
difference() {
thread_helix(
d=threadbase_d-0.1,
pitch=thread_pitch,
thread_depth=thread_h+0.1,
thread_angle=thread_angle,
twist=810,
higbee=thread_h*2,
anchor=TOP
);
zrot_copies(rots=[90,270]) {
zrot_copies(rots=[-28,28], r=threadbase_d/2) {
prismoid([20,1.82], [20,1.82+2*sin(29)*thread_h], h=thread_h+0.1, anchor=BOT, orient=RIGHT);
}
}
}
}
}
}
children();
}
}
function pco1810_neck(wall=2, anchor="support-ring", spin=0, orient=UP) =
no_function("pco1810_neck");
// Module: pco1810_cap()
// Usage:
// pco1810_cap(<wall>, <texture>);
// Description:
// Creates a basic cap for a PCO1810 threaded beverage bottle.
// Arguments:
// wall = Wall thickness in mm.
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
// ---
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
// Extra Anchors:
// "inside-top" = Centered on the inside top of the cap.
// Examples:
// pco1810_cap();
// pco1810_cap(texture="knurled");
// pco1810_cap(texture="ribbed");
// Example: Standard Anchors
// pco1810_cap(texture="ribbed") show_anchors(custom=false);
// Example: Custom Named Anchors
// expose_anchors(0.3)
// pco1810_cap(texture="ribbed")
// show_anchors(std=false);
module pco1810_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP)
{
cap_id = 28.58;
tamper_ring_h = 14.10;
thread_pitch = 3.18;
thread_angle = 20;
thread_od = cap_id;
thread_depth = 1.6;
$fn = segs(33/2);
w = cap_id + 2*wall;
h = tamper_ring_h + wall;
anchors = [
anchorpt("inside-top", [0,0,-(h/2-wall)])
];
attachable(anchor,spin,orient, d=w, l=h, anchors=anchors) {
down(h/2) zrot(45) {
difference() {
union() {
if (texture == "knurled") {
knurled_cylinder(d=w, helix=45, l=tamper_ring_h+wall, anchor=BOTTOM);
cyl(d=w-1.5, l=tamper_ring_h+wall, anchor=BOTTOM);
} else if (texture == "ribbed") {
zrot_copies(n=30, r=(w-1)/2) {
cube([1, 1, tamper_ring_h+wall], anchor=BOTTOM);
}
cyl(d=w-1, l=tamper_ring_h+wall, anchor=BOTTOM);
} else {
cyl(d=w, l=tamper_ring_h+wall, anchor=BOTTOM);
}
}
up(wall) cyl(d=cap_id, h=tamper_ring_h+wall, anchor=BOTTOM);
}
up(wall+2) thread_helix(d=thread_od-thread_depth*2, pitch=thread_pitch, thread_depth=thread_depth, thread_angle=thread_angle, twist=810, higbee=thread_depth, internal=true, anchor=BOTTOM);
}
children();
}
}
function pco1810_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP) =
no_function("pco1810_cap");
// Section: PCO-1881 Bottle Threading
// Module: pco1881_neck()
// Usage:
// pco1881_neck(<wall>)
// Description:
// Creates an approximation of a standard PCO-1881 threaded beverage bottle neck.
// Arguments:
// wall = Wall thickness in mm.
// ---
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
// Extra Anchors:
// "tamper-ring" = Centered at the top of the anti-tamper ring channel.
// "support-ring" = Centered at the bottom of the support ring.
// Example:
// pco1881_neck();
// Example:
// pco1881_neck() show_anchors(custom=false);
// Example:
// expose_anchors(0.3)
// pco1881_neck()
// show_anchors(std=false);
module pco1881_neck(wall=2, anchor="support-ring", spin=0, orient=UP)
{
inner_d = 21.74;
neck_d = 26.19;
neck_h = 5.00;
support_d = 33.00;
support_width = 0.58;
support_rad = 0.30;
support_h = 17.00;
support_ang = 15;
tamper_ring_d = 28.00;
tamper_ring_width = 0.30;
tamper_ring_ang = 45;
tamper_base_d = 25.71;
tamper_base_h = 11.20;
tamper_divot_r = 1.08;
threadbase_d = 24.20;
thread_pitch = 2.70;
thread_angle = 15;
thread_od = 27.4;
lip_d = 25.07;
lip_h = 1.70;
lip_leadin_r = 0.30;
lip_recess_d = 24.94;
lip_recess_h = 1.00;
lip_roundover_r = 0.58;
$fn = segs(support_d/2);
h = support_h+neck_h;
thread_h = (thread_od-threadbase_d)/2;
anchors = [
anchorpt("support-ring", [0,0,neck_h-h/2]),
anchorpt("tamper-ring", [0,0,h/2-tamper_base_h])
];
attachable(anchor,spin,orient, d1=neck_d, d2=lip_recess_d+2*lip_leadin_r, l=h, anchors=anchors) {
down(h/2) {
rotate_extrude(convexity=10) {
polygon(turtle(
state=[inner_d/2,0], [
"untilx", neck_d/2,
"left", 90,
"move", neck_h - 1,
"arcright", 1, 90,
"untilx", support_d/2-support_rad,
"arcleft", support_rad, 90,
"move", support_width,
"arcleft", support_rad, 90-support_ang,
"untilx", tamper_base_d/2,
"arcright", tamper_divot_r, 180-support_ang*2,
"left", 90-support_ang,
"untily", h-tamper_base_h, // Tamper ring holder base.
"right", 90,
"untilx", tamper_ring_d/2,
"left", 90,
"move", tamper_ring_width,
"left", tamper_ring_ang,
"untilx", threadbase_d/2,
"right", tamper_ring_ang,
"untily", h-lip_h-lip_leadin_r, // Lip base.
"arcright", lip_leadin_r, 90,
"untilx", lip_d/2,
"left", 90,
"untily", h-lip_recess_h,
"left", 90,
"untilx", lip_recess_d/2,
"right", 90,
"untily", h-lip_roundover_r,
"arcleft", lip_roundover_r, 90,
"untilx", inner_d/2
]
));
}
up(h-lip_h) {
difference() {
thread_helix(
d=threadbase_d-0.1,
pitch=thread_pitch,
thread_depth=thread_h+0.1,
thread_angle=thread_angle,
twist=650,
higbee=thread_h*2,
anchor=TOP
);
zrot_copies(rots=[90,270]) {
zrot_copies(rots=[-28,28], r=threadbase_d/2) {
prismoid([20,1.82], [20,1.82+2*sin(29)*thread_h], h=thread_h+0.1, anchor=BOT, orient=RIGHT);
}
}
}
}
}
children();
}
}
function pco1881_neck(wall=2, anchor="support-ring", spin=0, orient=UP) =
no_function("pco1881_neck");
// Module: pco1881_cap()
// Usage:
// pco1881_cap(wall, <texture>);
// Description:
// Creates a basic cap for a PCO1881 threaded beverage bottle.
// Arguments:
// wall = Wall thickness in mm.
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
// Extra Anchors:
// "inside-top" = Centered on the inside top of the cap.
// Examples:
// pco1881_cap();
// pco1881_cap(texture="knurled");
// pco1881_cap(texture="ribbed");
// Example: Standard Anchors
// pco1881_cap(texture="ribbed") show_anchors(custom=false);
// Example: Custom Named Anchors
// expose_anchors(0.5)
// pco1881_cap(texture="ribbed")
// show_anchors(std=false);
module pco1881_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP)
{
$fn = segs(33/2);
w = 28.58 + 2*wall;
h = 11.2 + wall;
anchors = [
anchorpt("inside-top", [0,0,-(h/2-wall)])
];
attachable(anchor,spin,orient, d=w, l=h, anchors=anchors) {
down(h/2) zrot(45) {
difference() {
union() {
if (texture == "knurled") {
knurled_cylinder(d=w, helix=45, l=11.2+wall, anchor=BOTTOM);
cyl(d=w-1.5, l=11.2+wall, anchor=BOTTOM);
} else if (texture == "ribbed") {
zrot_copies(n=30, r=(w-1)/2) {
cube([1, 1, 11.2+wall], anchor=BOTTOM);
}
cyl(d=w-1, l=11.2+wall, anchor=BOTTOM);
} else {
cyl(d=w, l=11.2+wall, anchor=BOTTOM);
}
}
up(wall) cyl(d=28.58, h=11.2+wall, anchor=BOTTOM);
}
up(wall+2) thread_helix(d=25.5, pitch=2.7, thread_depth=1.6, thread_angle=15, twist=650, higbee=1.6, internal=true, anchor=BOTTOM);
}
children();
}
}
function pco1881_cap(wall=2, texture="none", anchor=BOTTOM, spin=0, orient=UP) =
no_function("pco1881_cap");
// Section: Generic Bottle Connectors
// Module: generic_bottle_neck()
// Usage:
// generic_bottle_neck(<wall>, ...)
// Description:
// Creates a bottle neck given specifications.
// Arguments:
// wall = distance between ID and any wall that may be below the support
// neck_d = Outer diameter of neck without threads
// id = Inner diameter of neck
// thread_od = Outer diameter of thread
// height = Height of neck above support
// support_d = Outer diameter of support ring. Set to 0 for no support.
// pitch = Thread pitch
// round_supp = True to round the lower edge of the support ring
// ---
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
// Extra Anchors:
// "support-ring" = Centered at the bottom of the support ring.
// Example:
// generic_bottle_neck();
module generic_bottle_neck(
wall,
neck_d = 25,
id = 21.4,
thread_od = 27.2,
height = 17,
support_d = 33.0,
pitch = 3.2,
round_supp = false,
anchor = "support-ring",
spin = 0,
orient = UP
) {
inner_d = id;
neck_d = neck_d;
supp_d = max(neck_d, support_d);
thread_pitch = pitch;
thread_angle = 15;
diamMagMult = neck_d / 26.19;
heightMagMult = height / 17.00;
sup_r = 0.30 * (heightMagMult > 1 ? heightMagMult : 1);
support_r = floor(((supp_d == neck_d) ? sup_r : min(sup_r, (supp_d - neck_d) / 2)) * 5000) / 10000;
support_rad = (wall == undef || !round_supp) ? support_r :
min(support_r, floor((supp_d - (inner_d + 2 * wall)) * 5000) / 10000);
//Too small of a radius will cause errors with the arc, this limits granularity to .0001mm
support_width = 1 * (heightMagMult > 1 ? heightMagMult : 1) * sign(support_d);
roundover = 0.58 * diamMagMult;
lip_roundover_r = (roundover > (neck_d - inner_d) / 2) ? 0 : roundover;
h = height + support_width;
threadbase_d = neck_d - 0.8 * diamMagMult;
$fn = segs(33 / 2);
thread_h = (thread_od - threadbase_d) / 2;
anchors = [
anchorpt("support-ring", [0, 0, 0 - h / 2])
];
attachable(anchor, spin, orient, d1 = neck_d, d2 = 0, l = h, anchors = anchors) {
down(h / 2) {
rotate_extrude(convexity = 10) {
polygon(turtle(
state = [inner_d / 2, 0], (supp_d != neck_d) ? [
"untilx", supp_d / 2 - ((round_supp) ? support_rad : 0),
"arcleft", ((round_supp) ? support_rad : 0), 90,
"untily", support_width - support_rad,
"arcleft", support_rad, 90,
"untilx", neck_d / 2,
"right", 90,
"untily", h - lip_roundover_r,
"arcleft", lip_roundover_r, 90,
"untilx", inner_d / 2
] : [
"untilx", supp_d / 2 - ((round_supp) ? support_rad : 0),
"arcleft", ((round_supp) ? support_rad : 0), 90,
"untily", h - lip_roundover_r,
"arcleft", lip_roundover_r, 90,
"untilx", inner_d / 2
]
));
}
up(h - pitch / 2 - lip_roundover_r) {
difference() {
thread_helix(
d = threadbase_d - 0.1 * diamMagMult,
pitch = thread_pitch,
thread_depth = thread_h + 0.1 * diamMagMult,
thread_angle = thread_angle,
twist = 360 * (height - pitch - lip_roundover_r) * .6167 / pitch,
higbee = thread_h * 2,
anchor = TOP
);
zrot_copies(rots = [90, 270]) {
zrot_copies(rots = [-28, 28], r = threadbase_d / 2) {
prismoid(
[20 * heightMagMult, 1.82 * diamMagMult],
[20 * heightMagMult, 1.82 * diamMagMult * .6 + 2 * sin(29) * thread_h],
h = thread_h + 0.1 * diamMagMult,
anchor = BOT,
orient = RIGHT
);
}
}
}
}
}
children();
}
}
function generic_bottle_neck(
neck_d,
id,
thread_od,
height,
support_d,
pitch,
round_supp,
wall,
anchor, spin, orient
) = no_function("generic_bottle_neck");
// Module: generic_bottle_cap()
// Usage:
// generic_bottle_cap(wall, <texture>, ...);
// Description:
// Creates a basic threaded cap given specifications.
// Arguments:
// wall = Wall thickness in mm.
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
// ---
// height = Interior height of the cap in mm.
// thread_od = Outer diameter of the threads in mm.
// tolerance = Extra space to add to the outer diameter of threads and neck in mm. Applied to radius.
// neck_od = Outer diameter of neck in mm.
// thread_angle = Angle of taper on threads.
// pitch = Thread pitch in mm.
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
// Extra Anchors:
// "inside-top" = Centered on the inside top of the cap.
// Examples:
// generic_bottle_cap();
// generic_bottle_cap(texture="knurled");
// generic_bottle_cap(texture="ribbed");
module generic_bottle_cap(
wall = 2,
texture = "none",
height = 11.2,
thread_od = 28.58,
tolerance = .2,
neck_od = 25.5,
thread_angle = 15,
pitch = 4,
anchor = BOTTOM,
spin = 0,
orient = UP
) {
$fn = segs(33 / 2);
threadOuterDTol = thread_od + 2 * tolerance;
w = threadOuterDTol + 2 * wall;
h = height + wall;
neckOuterDTol = neck_od + 2 * tolerance;
threadDepth = (thread_od - neck_od) / 2 + .8;
diamMagMult = (w > 32.58) ? w / 32.58 : 1;
heightMagMult = (height > 11.2) ? height / 11.2 : 1;
anchors = [
anchorpt("inside-top", [0, 0, -(h / 2 - wall)])
];
attachable(anchor, spin, orient, d = w, l = h, anchors = anchors) {
down(h / 2) {
difference() {
union() {
// For the knurled and ribbed caps the PCO caps in BOSL2 cut into the wall
// thickness so the wall+texture are the specified wall thickness. That
// seems wrong so this does specified thickness+texture
if (texture == "knurled") {
knurled_cylinder(d = w + 1.5 * diamMagMult, helix = 45, l = h, anchor = BOTTOM);
cyl(d = w, l = h, anchor = BOTTOM);
} else if (texture == "ribbed") {
zrot_copies(n = 30, r = (w + .2 * diamMagMult) / 2) {
cube([1 * diamMagMult, 1 * diamMagMult, h], anchor = BOTTOM);
}
cyl(d = w, l = h, anchor = BOTTOM);
} else {
cyl(d = w, l = h, anchor = BOTTOM);
}
}
up(wall) cyl(d = threadOuterDTol, h = h, anchor = BOTTOM);
}
difference(){
up(wall + pitch / 2) {
thread_helix(d = neckOuterDTol, pitch = pitch, thread_depth = threadDepth, thread_angle = thread_angle, twist = 360 * ((height - pitch) / pitch), higbee = threadDepth, internal = true, anchor = BOTTOM);
}
}
}
children();
}
}
function generic_bottle_cap(
wall, texture, height,
thread_od, tolerance,
neck_od, thread_angle, pitch,
anchor, spin, orient
) = no_function("generic_bottle_cap");
// Module: thread_adapter_NC()
// Usage:
// thread_adapter_NC(wall, <texture>);
// Description:
// Creates a threaded neck to cap adapter
// Arguments:
// wall = Thickness of wall between neck and cap when d=0. Leave undefined to have the outside of the tube go from the OD of the neck support ring to the OD of the cap. Default: undef
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
// cap_wall = Wall thickness of the cap in mm.
// cap_h = Interior height of the cap in mm.
// cap_thread_od = Outer diameter of cap threads in mm.
// tolerance = Extra space to add to the outer diameter of threads and neck in mm. Applied to radius.
// cap_neck_od = Inner diameter of the cap threads.
// cap_neck_id = Inner diameter of the hole through the cap.
// cap_thread_taper = Angle of taper on threads.
// cap_thread_pitch = Thread pitch in mm
// neck_d = Outer diameter of neck w/o threads
// neck_id = Inner diameter of neck
// neck_thread_od = 27.2
// neck_h = Height of neck down to support ring
// neck_thread_pitch = Thread pitch in mm.
// neck_support_od = Outer diameter of neck support ring. Leave undefined to set equal to OD of cap. Set to 0 for no ring. Default: undef
// d = Distance between bottom of neck and top of cap
// taper_lead_in = Length to leave straight before tapering on tube between neck and cap if exists.
// Examples:
// thread_adapter_NC();
module thread_adapter_NC(
wall,
texture = "none",
cap_wall = 2,
cap_h = 11.2,
cap_thread_od = 28.58,
tolerance = .2,
cap_neck_od = 25.5,
cap_neck_id,
cap_thread_taper = 15,
cap_thread_pitch = 4,
neck_d = 25,
neck_id = 21.4,
neck_thread_od = 27.2,
neck_h = 17,
neck_thread_pitch = 3.2,
neck_support_od,
d = 0,
taper_lead_in = 0
) {
neck_support_od = (neck_support_od == undef || (d == 0 && neck_support_od < cap_thread_od + 2 * tolerance)) ? cap_thread_od + 2 * (cap_wall + tolerance) : neck_support_od;
cap_neck_id = (cap_neck_id == undef) ? neck_id : cap_neck_id;
wall = (wall == undef) ? neck_support_od + neck_d + cap_thread_od + neck_id : wall;
$fn = segs(33 / 2);
wallt1 = min(wall, (max(neck_support_od, neck_d) - neck_id) / 2);
wallt2 = min(wall, (cap_thread_od + 2 * (cap_wall + tolerance) - cap_neck_id) / 2);
difference(){
union(){
up(d / 2) {
generic_bottle_neck(neck_d = neck_d,
id = neck_id,
thread_od = neck_thread_od,
height = neck_h,
support_d = neck_support_od,
pitch = neck_thread_pitch,
round_supp = ((wallt1 < (neck_support_od - neck_id) / 2) && (d > 0 || neck_support_od > (cap_thread_od + 2 * (cap_wall + tolerance)))),
wall = (d > 0) ? wallt1 : min(wallt1, ((cap_thread_od + 2 * (cap_wall + tolerance) - neck_id) / 2))
);
}
if (d != 0) {
rotate_extrude(){
polygon(points = [
[0, d / 2],
[neck_id / 2 + wallt1, d / 2],
[neck_id / 2 + wallt1, d / 2 - taper_lead_in],
[cap_neck_id / 2 + wallt2, taper_lead_in - d / 2],
[cap_neck_id / 2 + wallt2, -d / 2],
[0, -d / 2]
]);
}
}
down(d / 2){
generic_bottle_cap(wall = cap_wall,
texture = texture,
height = cap_h,
thread_od = cap_thread_od,
tolerance = tolerance,
neck_od = cap_neck_od,
thread_angle = cap_thread_taper,
orient = DOWN,
pitch = cap_thread_pitch
);
}
}
rotate_extrude() {
polygon(points = [
[0, d / 2 + 0.1],
[neck_id / 2, d / 2],
[neck_id / 2, d / 2 - taper_lead_in],
[cap_neck_id / 2, taper_lead_in - d / 2],
[cap_neck_id / 2, -d / 2 - cap_wall],
[0, -d / 2 - cap_wall - 0.1]
]);
}
}
}
function thread_adapter_NC(
wall, texture, cap_wall, cap_h, cap_thread_od,
tolerance, cap_neck_od, cap_neck_id, cap_thread_taper,
cap_thread_pitch, neck_d, neck_id, neck_thread_od,
neck_h, neck_thread_pitch, neck_support_od, d, taper_lead_in
) = no_fuction("thread_adapter_NC");
// Module: thread_adapter_CC()
// Usage:
// thread_adapter_CC(wall, <texture>);
// Description:
// Creates a threaded cap to cap adapter.
// Arguments:
// wall = Wall thickness in mm.
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
// cap_h1 = Interior height of top cap.
// cap_thread_od1 = Outer diameter of threads on top cap.
// tolerance = Extra space to add to the outer diameter of threads and neck in mm. Applied to radius.
// cap_neck_od1 = Inner diameter of threads on top cap.
// cap_thread_pitch1 = Thread pitch of top cap in mm.
// cap_h2 = Interior height of bottom cap. Leave undefined to duplicate cap_h1.
// cap_thread_od2 = Outer diameter of threads on bottom cap. Leave undefined to duplicate capThread1.
// cap_neck_od2 = Inner diameter of threads on top cap. Leave undefined to duplicate cap_neck_od1.
// cap_thread_pitch2 = Thread pitch of bottom cap in mm. Leave undefinced to duplicate cap_thread_pitch1.
// d = Distance between caps.
// neck_id1 = Inner diameter of cutout in top cap.
// neck_id2 = Inner diameter of cutout in bottom cap.
// taper_lead_in = Length to leave straight before tapering on tube between caps if exists.
// Examples:
// thread_adapter_CC();
module thread_adapter_CC(
wall = 2,
texture = "none",
cap_h1 = 11.2,
cap_thread_od1 = 28.58,
tolerance = .2,
cap_neck_od1 = 25.5,
cap_thread_pitch1 = 4,
cap_h2,
cap_thread_od2,
cap_neck_od2,
cap_thread_pitch2,
d = 0,
neck_id1, neck_id2,
taper_lead_in = 0
) {
cap_h2 = (cap_h2 == undef) ? cap_h1 : cap_h2;
cap_thread_od2 = (cap_thread_od2 == undef) ? cap_thread_od1 : cap_thread_od2;
cap_neck_od2 = (cap_neck_od2 == undef) ? cap_neck_od1 : cap_neck_od2;
cap_thread_pitch2 = (cap_thread_pitch2 == undef) ? cap_thread_pitch1 : cap_thread_pitch2;
neck_id2 = (neck_id2 == undef && neck_id1 != undef) ? neck_id1 : neck_id2;
taper_lead_in = (d >= taper_lead_in * 2) ? taper_lead_in : d / 2;
$fn = segs(33 / 2);
difference(){
union(){
up(d / 2){
generic_bottle_cap(
orient = UP,
wall = wall,
texture = texture,
height = cap_h1,
thread_od = cap_thread_od1,
tolerance = tolerance,
neck_od = cap_neck_od1,
pitch = cap_thread_pitch1
);
}
if (d != 0) {
rotate_extrude() {
polygon(points = [
[0, d / 2],
[cap_thread_od1 / 2 + (wall + tolerance), d / 2],
[cap_thread_od1 / 2 + (wall + tolerance), d / 2 - taper_lead_in],
[cap_thread_od2 / 2 + (wall + tolerance), taper_lead_in - d / 2],
[cap_thread_od2 / 2 + (wall + tolerance), -d / 2],
[0, -d / 2]
]);
}
}
down(d / 2){
generic_bottle_cap(
orient = DOWN,
wall = wall,
texture = texture,
height = cap_h2,
thread_od = cap_thread_od2,
tolerance = tolerance,
neck_od = cap_neck_od2,
pitch = cap_thread_pitch2
);
}
}
if (neck_id1 != undef || neck_id2 != undef) {
neck_id1 = (neck_id1 == undef) ? neck_id2 : neck_id1;
neck_id2 = (neck_id2 == undef) ? neck_id1 : neck_id2;
rotate_extrude() {
polygon(points = [
[0, wall + d / 2 + 0.1],
[neck_id1 / 2, wall + d / 2],
[neck_id1 / 2, wall + d / 2 - taper_lead_in],
[neck_id2 / 2, taper_lead_in - d / 2 - wall],
[neck_id2 / 2, -d / 2 - wall],
[0, -d / 2 - wall - 0.1]
]);
}
}
}
}
function thread_adapter_CC(
wall, texture, cap_h1, cap_thread_od1, tolerance,
cap_neck_od1, cap_thread_pitch1, cap_h2, cap_thread_od2,
cap_neck_od2, cap_thread_pitch2, d, neck_id1, neck_id2, taper_lead_in
) = no_function("thread_adapter_CC");
// Module: thread_adapter_NN()
// Usage:
// thread_adapter_NN();
// Description:
// Creates a threaded neck to neck adapter.
// Arguments:
// d = Distance between bottoms of necks
// neck_od1 = Outer diameter of top neck w/o threads
// neck_id1 = Inner diameter of top neck
// thread_od1 = Outer diameter of threads on top neck
// height1 = Height of top neck above support ring.
// support_od1 = Outer diameter of the support ring on the top neck. Set to 0 for no ring.
// thread_pitch1 = Thread pitch of top neck.
// neck_od2 = Outer diameter of bottom neck w/o threads. Leave undefined to duplicate neck_od1
// neck_id2 = Inner diameter of bottom neck. Leave undefined to duplicate neck_id1
// thread_od2 = Outer diameter of threads on bottom neck. Leave undefined to duplicate thread_od1
// height2 = Height of bottom neck above support ring. Leave undefined to duplicate height1
// support_od2 = Outer diameter of the support ring on bottom neck. Set to 0 for no ring. Leave undefined to duplicate support_od1
// pitch2 = Thread pitch of bottom neck. Leave undefined to duplicate thread_pitch1
// taper_lead_in = Length to leave straight before tapering on tube between necks if exists.
// wall = Thickness of tube wall between necks. Leave undefined to match outer diameters with the neckODs/supportODs.
// Examples:
// thread_adapter_NN();
module thread_adapter_NN(
d = 0,
neck_od1 = 25,
neck_id1 = 21.4,
thread_od1 = 27.2,
height1 = 17,
support_od1 = 33.0,
thread_pitch1 = 3.2,
neck_od2, neck_id2,
thread_od2, height2,
support_od2, pitch2,
taper_lead_in = 0, wall
) {
neck_od2 = (neck_od2 == undef) ? neck_od1 : neck_od2;
neck_id2 = (neck_id2 == undef) ? neck_id1 : neck_id2;
thread_od2 = (thread_od2 == undef) ? thread_od1 : thread_od2;
height2 = (height2 == undef) ? height1 : height2;
support_od2 = (support_od2 == undef) ? support_od1 : support_od2;
pitch2 = (pitch2 == undef) ? thread_pitch1 : pitch2;
wall = (wall == undef) ? support_od1 + support_od2 + neck_id1 + neck_id2 : wall;
supprtOD2 = (d == 0 && support_od2 != 0) ? max(neck_od1, support_od2) : support_od2;
supprtOD1 = (d == 0 && support_od1 != 0) ? max(neck_od2, support_od1) : support_od1;
$fn = segs(33 / 2);
wallt1 = min(wall, (max(supprtOD1, neck_od1) - neck_id1) / 2);
wallt2 = min(wall, (max(supprtOD2, neck_od2) - neck_id2) / 2);
taper_lead_in = (d >= taper_lead_in * 2) ? taper_lead_in : d / 2;
difference(){
union(){
up(d / 2){
generic_bottle_neck(orient = UP,
neck_d = neck_od1,
id = neck_id1,
thread_od = thread_od1,
height = height1,
support_d = supprtOD1,
pitch = thread_pitch1,
round_supp = ((wallt1 < (supprtOD1 - neck_id1) / 2) || (support_od1 > max(neck_od2, support_od2) && d == 0)),
wall = (d > 0) ? wallt1 : min(wallt1, ((max(neck_od2, support_od2)) - neck_id1) / 2)
);
}
if (d != 0) {
rotate_extrude() {
polygon(points = [
[0, d / 2],
[neck_id1 / 2 + wallt1, d / 2],
[neck_id1 / 2 + wallt1, d / 2 - taper_lead_in],
[neck_id2 / 2 + wallt2, taper_lead_in - d / 2],
[neck_id2 / 2 + wallt2, -d / 2],
[0, -d / 2]
]);
}
}
down(d / 2){
generic_bottle_neck(orient = DOWN,
neck_d = neck_od2,
id = neck_id2,
thread_od = thread_od2,
height = height2,
support_d = supprtOD2,
pitch = pitch2,
round_supp = ((wallt2 < (supprtOD2 - neck_id2) / 2) || (support_od2 > max(neck_od1, support_od1) && d == 0)),
wall = (d > 0) ? wallt2 : min(wallt2, ((max(neck_od1, support_od1)) - neck_id2) / 2)
);
}
}
if (neck_id1 != undef || neck_id2 != undef) {
neck_id1 = (neck_id1 == undef) ? neck_id2 : neck_id1;
neck_id2 = (neck_id2 == undef) ? neck_id1 : neck_id2;
rotate_extrude() {
polygon(points = [
[0, d / 2],
[neck_id1 / 2, d / 2],
[neck_id1 / 2, d / 2 - taper_lead_in],
[neck_id2 / 2, taper_lead_in - d / 2],
[neck_id2 / 2, -d / 2],
[0, -d / 2]
]);
}
}
}
}
function thread_adapter_NN(
d, neck_od1, neck_id1, thread_od1, height1,
support_od1, thread_pitch1, neck_od2, neck_id2,
thread_od2, height2, support_od2,
pitch2, taper_lead_in, wall
) = no_fuction("thread_adapter_NN");
// vim: expandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap