mirror of
https://github.com/BelfrySCAD/BOSL2.git
synced 2024-12-29 00:09:41 +00:00
318 lines
8.5 KiB
OpenSCAD
318 lines
8.5 KiB
OpenSCAD
//////////////////////////////////////////////////////////////////////
|
|
// Masks and models for NEMA stepper motors.
|
|
//////////////////////////////////////////////////////////////////////
|
|
|
|
/*
|
|
BSD 2-Clause License
|
|
|
|
Copyright (c) 2017, Revar Desmera
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
include <transforms.scad>
|
|
include <shapes.scad>
|
|
include <math.scad>
|
|
|
|
|
|
function nema_motor_width(size) = lookup(size, [
|
|
[11.0, 28.2],
|
|
[14.0, 35.2],
|
|
[17.0, 42.3],
|
|
[23.0, 57.0],
|
|
[34.0, 86.0],
|
|
]);
|
|
|
|
function nema_motor_plinth_height(size) = lookup(size, [
|
|
[11.0, 1.5],
|
|
[14.0, 2.0],
|
|
[17.0, 2.0],
|
|
[23.0, 1.6],
|
|
[34.0, 2.03],
|
|
]);
|
|
|
|
function nema_motor_plinth_diam(size) = lookup(size, [
|
|
[11.0, 22.0],
|
|
[14.0, 22.0],
|
|
[17.0, 22.0],
|
|
[23.0, 38.1],
|
|
[34.0, 73.0],
|
|
]);
|
|
|
|
function nema_motor_screw_spacing(size) = lookup(size, [
|
|
[11.0, 23.11],
|
|
[14.0, 26.0],
|
|
[17.0, 30.99],
|
|
[23.0, 47.14],
|
|
[34.0, 69.6],
|
|
]);
|
|
|
|
function nema_motor_screw_size(size) = lookup(size, [
|
|
[11.0, 2.6],
|
|
[14.0, 3.0],
|
|
[17.0, 3.0],
|
|
[23.0, 5.1],
|
|
[34.0, 5.5],
|
|
]);
|
|
|
|
function nema_motor_screw_depth(size) = lookup(size, [
|
|
[11.0, 3.0],
|
|
[14.0, 4.5],
|
|
[17.0, 4.5],
|
|
[23.0, 4.8],
|
|
[34.0, 9.0],
|
|
]);
|
|
|
|
|
|
module nema11_stepper(h=24, shaft=5, shaft_len=20)
|
|
{
|
|
size = 11;
|
|
motor_width = nema_motor_width(size);
|
|
plinth_height = nema_motor_plinth_height(size);
|
|
plinth_diam = nema_motor_plinth_diam(size);
|
|
screw_spacing = nema_motor_screw_spacing(size);
|
|
screw_size = nema_motor_screw_size(size);
|
|
screw_depth = nema_motor_screw_depth(size);
|
|
|
|
difference() {
|
|
color([0.4, 0.4, 0.4]) {
|
|
translate([0, 0, -h/2]) {
|
|
rrect(size=[motor_width, motor_width, h], r=2, center=true);
|
|
}
|
|
}
|
|
xspread(screw_spacing)
|
|
yspread(screw_spacing)
|
|
down(screw_depth/2-0.05)
|
|
cylinder(r=screw_size/2, h=screw_depth, center=true, $fn=max(12,segs(screw_size/2)));
|
|
}
|
|
color([0.4, 0.4, 0.4])
|
|
translate([0, 0, plinth_height/2])
|
|
cylinder(h=plinth_height, r=plinth_diam/2, center=true);
|
|
color("silver")
|
|
translate([0, 0, shaft_len/2])
|
|
cylinder(h=shaft_len, r=shaft/2, center=true, $fn=max(12,segs(shaft/2)));
|
|
}
|
|
//!nema11_stepper();
|
|
|
|
|
|
|
|
module nema14_stepper(h=24, shaft=5, shaft_len=24)
|
|
{
|
|
size = 14;
|
|
motor_width = nema_motor_width(size);
|
|
plinth_height = nema_motor_plinth_height(size);
|
|
plinth_diam = nema_motor_plinth_diam(size);
|
|
screw_spacing = nema_motor_screw_spacing(size);
|
|
screw_size = nema_motor_screw_size(size);
|
|
screw_depth = nema_motor_screw_depth(size);
|
|
|
|
difference() {
|
|
color([0.4, 0.4, 0.4]) {
|
|
translate([0, 0, -h/2]) {
|
|
rrect(size=[motor_width, motor_width, h], r=2, center=true);
|
|
}
|
|
}
|
|
xspread(screw_spacing)
|
|
yspread(screw_spacing)
|
|
down(screw_depth/2-0.05)
|
|
cylinder(r=screw_size/2, h=screw_depth, center=true, $fn=max(12,segs(screw_size/2)));
|
|
}
|
|
color([0.4, 0.4, 0.4])
|
|
translate([0, 0, plinth_height/2])
|
|
cylinder(h=plinth_height, r=plinth_diam/2, center=true);
|
|
color("silver")
|
|
translate([0, 0, shaft_len/2])
|
|
cylinder(h=shaft_len, r=shaft/2, center=true, $fn=max(12,segs(shaft/2)));
|
|
}
|
|
//!nema14_stepper();
|
|
|
|
|
|
|
|
module nema17_stepper(h=34, shaft=5, shaft_len=20)
|
|
{
|
|
size = 17;
|
|
motor_width = nema_motor_width(size);
|
|
plinth_height = nema_motor_plinth_height(size);
|
|
plinth_diam = nema_motor_plinth_diam(size);
|
|
screw_spacing = nema_motor_screw_spacing(size);
|
|
screw_size = nema_motor_screw_size(size);
|
|
screw_depth = nema_motor_screw_depth(size);
|
|
|
|
difference() {
|
|
color([0.4, 0.4, 0.4]) {
|
|
down(h/2) {
|
|
rrect(size=[motor_width, motor_width, h], r=2, center=true);
|
|
}
|
|
}
|
|
xspread(screw_spacing)
|
|
yspread(screw_spacing)
|
|
down(screw_depth/2-0.05)
|
|
cylinder(r=screw_size/2, h=screw_depth, center=true, $fn=max(12,segs(screw_size/2)));
|
|
}
|
|
color([0.4, 0.4, 0.4])
|
|
up(plinth_height/2)
|
|
cylinder(h=plinth_height, r=plinth_diam/2, center=true);
|
|
color([0.9, 0.9, 0.9]) {
|
|
down(h-motor_width/12) {
|
|
fwd(motor_width/2+motor_width/24/2-0.1) {
|
|
difference() {
|
|
cube(size=[motor_width/8, motor_width/24, motor_width/8], center=true);
|
|
xrot(90) {
|
|
cylinder(d=motor_width/8-2, h=motor_width/6, center=true, $fn=12);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
color("silver") {
|
|
difference() {
|
|
cylinder(h=shaft_len, r=shaft/2, $fn=max(12,segs(shaft/2)));
|
|
up(shaft_len/2+1) {
|
|
right(shaft_len/2+shaft/2-0.5) {
|
|
cube(shaft_len, center=true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
//!nema17_stepper();
|
|
|
|
|
|
|
|
module nema23_stepper(h=50, shaft=6.35, shaft_len=25)
|
|
{
|
|
size = 23;
|
|
motor_width = nema_motor_width(size);
|
|
plinth_height = nema_motor_plinth_height(size);
|
|
plinth_diam = nema_motor_plinth_diam(size);
|
|
screw_spacing = nema_motor_screw_spacing(size);
|
|
screw_size = nema_motor_screw_size(size);
|
|
screw_depth = nema_motor_screw_depth(size);
|
|
|
|
screw_inset = motor_width - screw_spacing + 1;
|
|
difference() {
|
|
union() {
|
|
color([0.4, 0.4, 0.4]) {
|
|
translate([0, 0, -h/2]) {
|
|
rrect(size=[motor_width, motor_width, h], r=2, center=true);
|
|
}
|
|
}
|
|
color([0.4, 0.4, 0.4])
|
|
translate([0, 0, plinth_height/2])
|
|
cylinder(h=plinth_height, r=plinth_diam/2, center=true);
|
|
color("silver")
|
|
translate([0, 0, shaft_len/2])
|
|
cylinder(h=shaft_len, r=shaft/2, center=true, $fn=max(12,segs(shaft/2)));
|
|
}
|
|
color([0.4, 0.4, 0.4]) {
|
|
xspread(screw_spacing) {
|
|
yspread(screw_spacing) {
|
|
down(screw_depth/2)
|
|
cylinder(r=screw_size/2, h=screw_depth+2, center=true, $fn=max(12,segs(screw_size/2)));
|
|
down(screw_depth+h/2)
|
|
cube(size=[screw_inset, screw_inset, h], center=true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
//!nema23_stepper();
|
|
|
|
|
|
|
|
module nema34_stepper(h=75, shaft=12.7, shaft_len=32)
|
|
{
|
|
size = 34;
|
|
motor_width = nema_motor_width(size);
|
|
plinth_height = nema_motor_plinth_height(size);
|
|
plinth_diam = nema_motor_plinth_diam(size);
|
|
screw_spacing = nema_motor_screw_spacing(size);
|
|
screw_size = nema_motor_screw_size(size);
|
|
screw_depth = nema_motor_screw_depth(size);
|
|
|
|
screw_inset = motor_width - screw_spacing + 1;
|
|
difference() {
|
|
union() {
|
|
color([0.4, 0.4, 0.4]) {
|
|
translate([0, 0, -h/2]) {
|
|
rrect(size=[motor_width, motor_width, h], r=2, center=true);
|
|
}
|
|
}
|
|
color([0.4, 0.4, 0.4])
|
|
translate([0, 0, plinth_height/2])
|
|
cylinder(h=plinth_height, r=plinth_diam/2, center=true);
|
|
color("silver")
|
|
translate([0, 0, shaft_len/2])
|
|
cylinder(h=shaft_len, r=shaft/2, center=true, $fn=max(24,segs(shaft/2)));
|
|
}
|
|
color([0.4, 0.4, 0.4]) {
|
|
xspread(screw_spacing) {
|
|
yspread(screw_spacing) {
|
|
down(screw_depth/2)
|
|
cylinder(r=screw_size/2, h=screw_depth+2, center=true, $fn=max(12,segs(screw_size/2)));
|
|
down(screw_depth+h/2)
|
|
cube(size=[screw_inset, screw_inset, h], center=true);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
//!nema34_stepper();
|
|
|
|
|
|
|
|
module nema17_mount_holes(depth=5, l=5, slop=printer_slop)
|
|
{
|
|
size = 17;
|
|
plinth_diam = nema_motor_plinth_diam(size)+slop;
|
|
screw_spacing = nema_motor_screw_spacing(size);
|
|
screw_size = nema_motor_screw_size(size)+slop;
|
|
|
|
union() {
|
|
xspread(screw_spacing) {
|
|
yspread(screw_spacing) {
|
|
if (l>0) {
|
|
union() {
|
|
yspread(l) cylinder(h=depth, d=screw_size, center=true, $fn=max(8,segs(screw_size/2)));
|
|
cube([screw_size, l, depth], center=true);
|
|
}
|
|
} else {
|
|
cylinder(h=depth, d=screw_size, center=true, $fn=max(8,segs(screw_size/2)));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (l>0) {
|
|
union () {
|
|
yspread(l) cylinder(h=depth, d=plinth_diam, center=true);
|
|
cube([plinth_diam, l, depth], center=true);
|
|
}
|
|
} else {
|
|
cylinder(h=depth, d=plinth_diam, center=true);
|
|
}
|
|
}
|
|
//!nema17_mount_holes(depth=5, l=5);
|
|
|
|
|
|
|
|
// vim: noexpandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap
|