mirror of
https://github.com/BelfrySCAD/BOSL2.git
synced 2024-12-29 16:29:40 +00:00
295 lines
13 KiB
OpenSCAD
295 lines
13 KiB
OpenSCAD
//////////////////////////////////////////////////////////////////////
|
|
// LibFile: constants.scad
|
|
// Useful Constants.
|
|
// To use this, add the following line to the top of your file.
|
|
// ```
|
|
// include <BOSL2/std.scad>
|
|
// ```
|
|
//////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
// Section: General Constants
|
|
|
|
PRINTER_SLOP = 0.20; // The printer specific amount of slop in mm to print with to make parts fit exactly. You may need to override this value for your printer.
|
|
|
|
|
|
|
|
// Section: Directional Vectors
|
|
// Vectors useful for `rotate()`, `mirror()`, and `anchor` arguments for `cuboid()`, `cyl()`, etc.
|
|
|
|
// Constant: LEFT
|
|
// Description: Vector pointing left. [-1,0,0]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=LEFT);
|
|
LEFT = [-1, 0, 0];
|
|
|
|
// Constant: RIGHT
|
|
// Description: Vector pointing right. [1,0,0]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=RIGHT);
|
|
RIGHT = [ 1, 0, 0];
|
|
|
|
// Constant: FWD
|
|
// Description: Vector pointing forward. [0,-1,0]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=FWD);
|
|
FWD = [ 0, -1, 0];
|
|
|
|
// Constant: BACK
|
|
// Description: Vector pointing back. [0,1,0]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=BACK);
|
|
BACK = [ 0, 1, 0];
|
|
|
|
// Constant: DOWN
|
|
// Description: Vector pointing down. [0,0,-1]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=DOWN);
|
|
DOWN = [ 0, 0, -1];
|
|
|
|
// Constant: UP
|
|
// Description: Vector pointing up. [0,0,1]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=UP);
|
|
UP = [ 0, 0, 1];
|
|
|
|
// Constant: ALLPOS
|
|
// Description: Vector pointing right, back, and up. [1,1,1]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=ALLPOS);
|
|
ALLPOS = [ 1, 1, 1]; // Vector pointing X+,Y+,Z+.
|
|
|
|
// Constant: ALLNEG
|
|
// Description: Vector pointing left, forwards, and down. [-1,-1,-1]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=ALLNEG);
|
|
ALLNEG = [-1, -1, -1]; // Vector pointing X-,Y-,Z-.
|
|
|
|
// Constant: CENTER
|
|
// Description: Zero vector. Centered. [0,0,0]
|
|
// Example(3D): Usage with `anchor`
|
|
// cuboid(20, anchor=CENTER);
|
|
CENTER = [ 0, 0, 0]; // Centered zero vector.
|
|
|
|
|
|
// Section: Vector Aliases
|
|
// Useful aliases for use with `anchor`.
|
|
|
|
ABOVE = UP; // Vector pointing up, alias to `UP`.
|
|
BELOW = DOWN; // Vector pointing down, alias to `DOWN`.
|
|
BEFORE = FWD; // Vector pointing forward, alias to `FWD`.
|
|
BEHIND = BACK; // Vector pointing back, alias to `BACK`.
|
|
|
|
TOP = UP; // Vector pointing up, alias to `UP`.
|
|
BOTTOM = DOWN; // Vector pointing down, alias to `DOWN`.
|
|
FRONT = FWD; // Vector pointing forward, alias to `FWD`.
|
|
REAR = BACK; // Vector pointing back, alias to `BACK`.
|
|
|
|
FORWARD = FWD; // Vector pointing forward, alias to `FWD`.
|
|
|
|
|
|
|
|
// CommonCode:
|
|
// orientations = [
|
|
// ORIENT_X, ORIENT_Y, ORIENT_Z,
|
|
// ORIENT_XNEG, ORIENT_YNEG, ORIENT_ZNEG,
|
|
// ORIENT_X_90, ORIENT_Y_90, ORIENT_Z_90,
|
|
// ORIENT_XNEG_90, ORIENT_YNEG_90, ORIENT_ZNEG_90,
|
|
// ORIENT_X_180, ORIENT_Y_180, ORIENT_Z_180,
|
|
// ORIENT_XNEG_180, ORIENT_YNEG_180, ORIENT_ZNEG_180,
|
|
// ORIENT_X_270, ORIENT_Y_270, ORIENT_Z_270,
|
|
// ORIENT_XNEG_270, ORIENT_YNEG_270, ORIENT_ZNEG_270
|
|
// ];
|
|
// axiscolors = ["red", "forestgreen", "dodgerblue"];
|
|
// module text3d(text, h=0.01, size=3) {
|
|
// linear_extrude(height=h, convexity=10) {
|
|
// text(text=text, size=size, valign="center", halign="center");
|
|
// }
|
|
// }
|
|
// module orient_cube(ang) {
|
|
// color("lightgray") cube(20, center=true);
|
|
// color(axiscolors.x) up ((20-1)/2+0.01) back ((20-1)/2+0.01) cube([18,1,1], center=true);
|
|
// color(axiscolors.y) up ((20-1)/2+0.01) right((20-1)/2+0.01) cube([1,18,1], center=true);
|
|
// color(axiscolors.z) back((20-1)/2+0.01) right((20-1)/2+0.01) cube([1,1,18], center=true);
|
|
// for (axis=[0:2], neg=[0:1]) {
|
|
// idx = axis + 3*neg + 6*ang/90;
|
|
// rotate(orientations[idx]) {
|
|
// up(10) {
|
|
// fwd(4) color("black") text3d(text=str(ang), size=4);
|
|
// back(4) color(axiscolors[axis]) text3d(text=str(["X","Y","Z"][axis], ["+","NEG"][neg]), size=4);
|
|
// }
|
|
// }
|
|
// }
|
|
// }
|
|
|
|
|
|
// Section: Standard Orientations
|
|
// Orientations for `cyl()`, `prismoid()`, etc. They take the form of standard [X,Y,Z]
|
|
// rotation angles for rotating a vertical shape into the given orientations.
|
|
// Figure(Spin): Standard Orientations
|
|
// orient_cube(0);
|
|
|
|
ORIENT_X = [ 90, 0, 90]; // Orient along the X axis.
|
|
ORIENT_Y = [ 90, 0, 180]; // Orient along the Y axis.
|
|
ORIENT_Z = [ 0, 0, 0]; // Orient along the Z axis.
|
|
ORIENT_XNEG = [ 90, 0, -90]; // Orient reversed along the X axis.
|
|
ORIENT_YNEG = [ 90, 0, 0]; // Orient reversed along the Y axis.
|
|
ORIENT_ZNEG = [ 0, 180, 0]; // Orient reversed along the Z axis.
|
|
|
|
|
|
// Section: Orientations Rotated 90º
|
|
// Orientations for `cyl()`, `prismoid()`, etc. They take the form of standard [X,Y,Z]
|
|
// rotation angles for rotating a vertical shape into the given orientations.
|
|
// Figure(Spin): Orientations Rotated 90º
|
|
// orient_cube(90);
|
|
|
|
ORIENT_X_90 = [ 90, -90, 90]; // Orient along the X axis, then rotate 90 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_Y_90 = [ 90, -90, 180]; // Orient along the Y axis, then rotate 90 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_Z_90 = [ 0, 0, 90]; // Orient along the Z axis, then rotate 90 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_XNEG_90 = [ 0, -90, 0]; // Orient reversed along the X axis, then rotate 90 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_YNEG_90 = [ 90, -90, 0]; // Orient reversed along the Y axis, then rotate 90 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_ZNEG_90 = [ 0, 180, -90]; // Orient reversed along the Z axis, then rotate 90 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
|
|
|
|
// Section: Orientations Rotated 180º
|
|
// Orientations for `cyl()`, `prismoid()`, etc. They take the form of standard [X,Y,Z]
|
|
// rotation angles for rotating a vertical shape into the given orientations.
|
|
// Figure(Spin): Orientations Rotated 180º
|
|
// orient_cube(180);
|
|
|
|
ORIENT_X_180 = [-90, 0, -90]; // Orient along the X axis, then rotate 180 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_Y_180 = [-90, 0, 0]; // Orient along the Y axis, then rotate 180 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_Z_180 = [ 0, 0, 180]; // Orient along the Z axis, then rotate 180 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_XNEG_180 = [-90, 0, 90]; // Orient reversed along the X axis, then rotate 180 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_YNEG_180 = [-90, 0, 180]; // Orient reversed along the Y axis, then rotate 180 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_ZNEG_180 = [ 0, 180, 180]; // Orient reversed along the Z axis, then rotate 180 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
|
|
|
|
// Section: Orientations Rotated 270º
|
|
// Orientations for `cyl()`, `prismoid()`, etc. They take the form of standard [X,Y,Z]
|
|
// rotation angles for rotating a vertical shape into the given orientations.
|
|
// Figure(Spin): Orientations Rotated 270º
|
|
// orient_cube(270);
|
|
|
|
ORIENT_X_270 = [ 90, 90, 90]; // Orient along the X axis, then rotate 270 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_Y_270 = [ 90, 90, 180]; // Orient along the Y axis, then rotate 270 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_Z_270 = [ 0, 0, -90]; // Orient along the Z axis, then rotate 270 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_XNEG_270 = [ 90, 90, -90]; // Orient reversed along the X axis, then rotate 270 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_YNEG_270 = [ 90, 90, 0]; // Orient reversed along the Y axis, then rotate 270 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
ORIENT_ZNEG_270 = [ 0, 180, 90]; // Orient reversed along the Z axis, then rotate 270 degrees counter-clockwise on that axis, as seen when facing the origin from that axis orientation.
|
|
|
|
|
|
// Section: Individual Edges
|
|
// Constants for specifying edges for `cuboid()`, etc.
|
|
|
|
EDGE_TOP_BK = [[1,0,0,0], [0,0,0,0], [0,0,0,0]]; // Top Back edge.
|
|
EDGE_TOP_FR = [[0,1,0,0], [0,0,0,0], [0,0,0,0]]; // Top Front edge.
|
|
EDGE_BOT_FR = [[0,0,1,0], [0,0,0,0], [0,0,0,0]]; // Bottom Front Edge.
|
|
EDGE_BOT_BK = [[0,0,0,1], [0,0,0,0], [0,0,0,0]]; // Bottom Back Edge.
|
|
|
|
EDGE_TOP_RT = [[0,0,0,0], [1,0,0,0], [0,0,0,0]]; // Top Right edge.
|
|
EDGE_TOP_LF = [[0,0,0,0], [0,1,0,0], [0,0,0,0]]; // Top Left edge.
|
|
EDGE_BOT_LF = [[0,0,0,0], [0,0,1,0], [0,0,0,0]]; // Bottom Left edge.
|
|
EDGE_BOT_RT = [[0,0,0,0], [0,0,0,1], [0,0,0,0]]; // Bottom Right edge.
|
|
|
|
EDGE_BK_RT = [[0,0,0,0], [0,0,0,0], [1,0,0,0]]; // Back Right edge.
|
|
EDGE_BK_LF = [[0,0,0,0], [0,0,0,0], [0,1,0,0]]; // Back Left edge.
|
|
EDGE_FR_LF = [[0,0,0,0], [0,0,0,0], [0,0,1,0]]; // Front Left edge.
|
|
EDGE_FR_RT = [[0,0,0,0], [0,0,0,0], [0,0,0,1]]; // Front Right edge.
|
|
|
|
// Section: Sets of Edges
|
|
// Constants for specifying edges for `cuboid()`, etc.
|
|
|
|
EDGES_X_TOP = [[1,1,0,0], [0,0,0,0], [0,0,0,0]]; // Both X-aligned Top edges.
|
|
EDGES_X_BOT = [[0,0,1,1], [0,0,0,0], [0,0,0,0]]; // Both X-aligned Bottom edges.
|
|
EDGES_X_FR = [[0,1,1,0], [0,0,0,0], [0,0,0,0]]; // Both X-aligned Front edges.
|
|
EDGES_X_BK = [[1,0,0,1], [0,0,0,0], [0,0,0,0]]; // Both X-aligned Back edges.
|
|
EDGES_X_ALL = [[1,1,1,1], [0,0,0,0], [0,0,0,0]]; // All four X-aligned edges.
|
|
|
|
EDGES_Y_TOP = [[0,0,0,0], [1,1,0,0], [0,0,0,0]]; // Both Y-aligned Top edges.
|
|
EDGES_Y_BOT = [[0,0,0,0], [0,0,1,1], [0,0,0,0]]; // Both Y-aligned Bottom edges.
|
|
EDGES_Y_LF = [[0,0,0,0], [0,1,1,0], [0,0,0,0]]; // Both Y-aligned Left edges.
|
|
EDGES_Y_RT = [[0,0,0,0], [1,0,0,1], [0,0,0,0]]; // Both Y-aligned Right edges.
|
|
EDGES_Y_ALL = [[0,0,0,0], [1,1,1,1], [0,0,0,0]]; // All four Y-aligned edges.
|
|
|
|
EDGES_Z_BK = [[0,0,0,0], [0,0,0,0], [1,1,0,0]]; // Both Z-aligned Back edges.
|
|
EDGES_Z_FR = [[0,0,0,0], [0,0,0,0], [0,0,1,1]]; // Both Z-aligned Front edges.
|
|
EDGES_Z_LF = [[0,0,0,0], [0,0,0,0], [0,1,1,0]]; // Both Z-aligned Left edges.
|
|
EDGES_Z_RT = [[0,0,0,0], [0,0,0,0], [1,0,0,1]]; // Both Z-aligned Right edges.
|
|
EDGES_Z_ALL = [[0,0,0,0], [0,0,0,0], [1,1,1,1]]; // All four Z-aligned edges.
|
|
|
|
EDGES_LEFT = [[0,0,0,0], [0,1,1,0], [0,1,1,0]]; // All four Left edges.
|
|
EDGES_RIGHT = [[0,0,0,0], [1,0,0,1], [1,0,0,1]]; // All four Right edges.
|
|
EDGES_FRONT = [[0,1,1,0], [0,0,0,0], [0,0,1,1]]; // All four Front edges.
|
|
EDGES_BACK = [[1,0,0,1], [0,0,0,0], [1,1,0,0]]; // All four Back edges.
|
|
EDGES_BOTTOM = [[0,0,1,1], [0,0,1,1], [0,0,0,0]]; // All four Bottom edges.
|
|
EDGES_TOP = [[1,1,0,0], [1,1,0,0], [0,0,0,0]]; // All four Top edges.
|
|
|
|
EDGES_NONE = [[0,0,0,0], [0,0,0,0], [0,0,0,0]]; // No edges.
|
|
EDGES_ALL = [[1,1,1,1], [1,1,1,1], [1,1,1,1]]; // All edges.
|
|
|
|
|
|
// Section: Edge Helpers
|
|
|
|
EDGE_OFFSETS = [ // Array of XYZ offsets to the center of each edge.
|
|
[[0, 1, 1], [ 0,-1, 1], [ 0,-1,-1], [0, 1,-1]],
|
|
[[1, 0, 1], [-1, 0, 1], [-1, 0,-1], [1, 0,-1]],
|
|
[[1, 1, 0], [-1, 1, 0], [-1,-1, 0], [1,-1, 0]]
|
|
];
|
|
|
|
|
|
// Function: corner_edge_count()
|
|
// Description: Counts how many given edges intersect at a specific corner.
|
|
// Arguments:
|
|
// edges = Standard edges array.
|
|
// v = Vector pointing to the corner to count edge intersections at.
|
|
function corner_edge_count(edges, v) =
|
|
(v[2]<=0)? (
|
|
(v[1]<=0)? (
|
|
(v[0]<=0)? (
|
|
edges[0][2] + edges[1][2] + edges[2][2]
|
|
) : (
|
|
edges[0][2] + edges[1][3] + edges[2][3]
|
|
)
|
|
) : (
|
|
(v[0]<=0)? (
|
|
edges[0][3] + edges[1][2] + edges[2][1]
|
|
) : (
|
|
edges[0][3] + edges[1][3] + edges[2][0]
|
|
)
|
|
)
|
|
) : (
|
|
(v[1]<=0)? (
|
|
(v[0]<=0)? (
|
|
edges[0][1] + edges[1][1] + edges[2][2]
|
|
) : (
|
|
edges[0][1] + edges[1][0] + edges[2][3]
|
|
)
|
|
) : (
|
|
(v[0]<=0)? (
|
|
edges[0][0] + edges[1][1] + edges[2][1]
|
|
) : (
|
|
edges[0][0] + edges[1][0] + edges[2][0]
|
|
)
|
|
)
|
|
);
|
|
|
|
|
|
// Default values for attachment code.
|
|
$color = undef;
|
|
$overlap = 0.01;
|
|
$attach_to = undef;
|
|
$attach_anchor = [CENTER, CENTER, UP, 0];
|
|
$attach_norot = false;
|
|
$parent_size = undef;
|
|
$parent_size2 = undef;
|
|
$parent_shift = [0,0];
|
|
$parent_orient = ORIENT_Z;
|
|
$parent_anchor = CENTER;
|
|
$parent_anchors = [];
|
|
$tags_shown = [];
|
|
$tags_hidden = [];
|
|
$tags = "";
|
|
|
|
|
|
// vim: noexpandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap
|