fix linting issues

.trunk/trunk.yaml

@@ -21,6 +21,7 @@ lint:
     - trufflehog # Trufflehog duplicates gitleaks functionality.
     - terrascan
     - trivy
+    - checkov
   enabled:
     - hadolint@2.12.0
     - tflint@0.51.1
@@ -28,7 +29,6 @@ lint:
     - markdownlint@0.41.0
     - taplo@0.8.1
     - actionlint@1.7.1
-    - checkov@3.2.156
     - git-diff-check
     - prettier@3.3.2
     - yamllint@1.35.1

README.md

@@ -1,5 +1,3 @@
-Grey's Docker Swarm does IAC
+# Grey's Docker Swarm does IAC
-============================
 
 Or: How I learned to stop worrying and love the swarm.
-

modules/minio/minio.tf

@@ -52,6 +52,7 @@ resource "docker_service" "minio" {
 }
 
 module "minio_nginx_config" {
+  # tflint-ignore: terraform_module_pinned_source
   source   = "git::https://code.techinc.nl/grey/terraform-nginx.git//nginx-site-available"
   hostname = var.domain
   //certificate   = acme_certificate.ooo_grey["s3"]

modules/vigil/terraform.tf

@@ -12,5 +12,9 @@ terraform {
       source  = "BrendanThompson/scratch"
       version = "~> 0.4"
     }
+    local = {
+      source  = "hashicorp/local"
+      version = "~>2.1"
+    }
   }
 }

nginx.tf

@@ -11,6 +11,7 @@ resource "docker_network" "loadbalancer" {
 }
 
 module "nginx" {
+  # tflint-ignore: terraform_module_pinned_source
   source = "git::https://code.techinc.nl/grey/terraform-nginx.git"
   configs = concat(
     module.minio.nginx_files,

printers.tf

@@ -13,37 +13,25 @@ resource "docker_volume" "ender5plus" {
   name     = "ender5plus_config"
 }
 
-resource "docker_service" "ender5plus" {
+resource "docker_container" "ender5plus" {
+  image = "${docker_image.octoprint.name}:latest"
   provider = docker.printi
-  name     = "ender5plus"
+  name  = "ender5plus"
-  task_spec {
+  env = [
-    container_spec {
+    "ENABLE_MJPG_STREAMER=false"
-      image = "${docker_image.octoprint.name}:latest"
+  ]
-      mounts {
+  restart = "always"
-        target = "/octoprint"
+  ports {
-        source = docker_volume.ender5plus.name
+    internal = 80
-        type   = "volume"
+    external = 3000
-      }
-      mounts {
-        target = "/dev/ttyACM0"
-        source = "/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A602AFFK-if00-port0"
-        type   = "bind"
-      }
-      env = {
-        #ENABLE_MJPG_STREAMER = "true"
-      }
-    }
-    restart_policy {
-      condition = "any"
-      delay     = "20s"
-      window    = "0s"
-    }
   }
-  endpoint_spec {
+  devices {
-    ports {
+    host_path = "/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A602AFFK-if00-port0"
-      target_port    = 80
+    container_path = "/dev/ttyACM0"
-      published_port = 3000
+  }
-      publish_mode   = "ingress"
+  volumes {
-    }
+    container_path = "/octoprint"
+    #host_path = docker_volume.ender5plus.name
+    volume_name = docker_volume.ender5plus.name
   }
 }

printers/Dockerfile

@@ -1,6 +1,6 @@
 FROM octoprint/octoprint AS octoprint
-RUN apt update -q && \
+RUN apt-get update -q && \
-    apt install -yq \
+    apt-get install -yq --no-install-recommends \
         cpulimit \
         sudo \
         curl wget \
@@ -13,23 +13,16 @@ RUN apt update -q && \
 
 FROM octoprint AS mjpg-streamer-builder
 WORKDIR /build
-RUN apt update -q && \
+RUN apt-get update -q && \
-    apt install -yq unzip subversion
+    apt-get install -yq --no-install-recommends \
+      unzip  \
+      subversion
 RUN curl -s -L https://github.com/pranjalv123/mjpg-streamer-yu12/archive/refs/heads/master.zip --output mjpeg-streamer-yu12.zip && \
-    unzip -q mjpeg-streamer-yu12.zip
+    unzip -q mjpeg-streamer-yu12.zip \
-RUN cd mjpg-streamer-yu12-master/mjpg-streamer && \
+WORKDIR /build/mjpg-streamer-yu12-master/mjpg-streamer
-    make && \
+RUN make && \
     ls -lah
 
 FROM octoprint AS octoprint-mjpg-streamer
 COPY --from=mjpg-streamer-builder /build/mjpg-streamer-yu12-master/mjpg-streamer/mjpg_streamer /usr/local/bin/mjpg_streamer
 COPY --from=mjpg-streamer-builder /build/mjpg-streamer-yu12-master/mjpg-streamer/*.so /usr/local/lib/mjpg-streamer/
-
-FROM octoprint AS octoklipper
-RUN git clone https://github.com/Klipper3d/klipper.git klipper && \
-    cd klipper && \
-    git checkout master && \
-    rm .git -rf
-RUN venv/bin/pip install -r klipper/scripts/klippy-requirements.txt \
- && venv/bin/python -m compileall klipper/klippy \
- && venv/bin/python klipper/klippy/chelper/__init__.py

vigil.tf

@@ -1,4 +1,5 @@
 module "vigil_nginx_config" {
+  # tflint-ignore: terraform_module_pinned_source
   source   = "git::https://code.techinc.nl/grey/terraform-nginx.git//nginx-site-available"
   hostname = "vigil.california.ti"
   //certificate   = acme_certificate.ooo_grey["s3"]