Dinking with klipper.

Makefile

@@ -3,6 +3,9 @@ lazy-deploy:
 	ssh printi "cd ~/octoprint && make full-send"
 
 full-send:
+	sudo rm -Rv /dev/printers
+	sudo mkdir -p /dev/printers
+	sudo ln -s /dev/serial/by-path/pci-0000:00:12.1-usb-0:3:1.0-port0 /dev/printers/corexy
 	docker compose build
 	docker compose down
-	#docker compose up -d
+	docker compose up -d

docker-compose.yml

@@ -3,8 +3,23 @@
 
 volumes:
   corexy:
+  corexy_gcode_files:
+  corexy_moonraker_data:
 
 services:
+  corexy-klipper:
+    image: dimalo/klipper-moonraker
+    cap_add:
+      - SYS_NICE
+    ports:
+      - 7001:7125
+    restart: unless-stopped
+    volumes:
+      - corexy_gcode_files:/home/klippy/gcode_files
+      - ./corexy/klipper/config:/home/klippy/.config
+      - corexy_moonraker_data:/home/klippy/.moonraker_database
+    devices:
+      - /dev/printers/corexy:/dev/ttyUSB0
   corexy:
     build:
       context: .
@@ -16,6 +31,6 @@ services:
       - corexy:/octoprint
     #environment:
     #  - ENABLE_MJPG_STREAMER=true
-    devices:
-      - /dev/ttyACM0:/dev/ttyACM0
-    #  - /dev/video0:/dev/video0
+  #  devices:
+  #    - /dev/printers/corexy:/dev/ttyACM0
+  #  #  - /dev/video0:/dev/video0