basic controller

README

@@ -8,6 +8,7 @@ This project is designed to work over serial with an external computer that deci
 -DBOARD1 : Used to set Pins for BOARD1 config
 -DBOARD2 : Used to set Pins for BOARD2 config
 -DRELAY1 : Enable the First Relay
+-RELAY1_REVERSED : If the open and closed state of relay one are reversed.
 -DRELAY2 : Not implemented yet
 
 

include/ACL.h

@@ -1,45 +0,0 @@
-#ifndef ACL_H
-#define ACL_H
-
-#include <Arduino.h>
-#include <initializer_list>
-#include <EEPROM.h>
-
-#include <Preferences.h>
-
-#ifdef WEB_SERVER
-    #ifdef WEB_SERIAL_DEBUG
-        #include <WebSerial.h>
-    #endif
-#endif
-
-struct User {
-  String cardId;
-  String desc;
-};
-
-class ACL {
-public:
-  ACL();
-  ACL(std::initializer_list<User> userList);
-  ~ACL();
-
-
-  void addUser(const String& cardId, const String& desc);
-  void updateUser(const String& cardId, const String& newCardId, const String& newdesc);
-  bool removeUser(const String& cardId);
-  bool validateAccess(const String& cardId);
-  int getACLSize() const;
-
-  // Additional EEPROM functions
-  void saveToEEPROM();
-  void loadFromEEPROM();
-
-  const User* getACL() const { return acl; } // Getter for acl  
-  
-private:
-  User* acl;
-  int aclSize;
-};
-
-#endif

include/disable.h

@@ -0,0 +1,14 @@
+#ifndef MAIN_H
+    #define MAIN_H
+
+    #include "hardware.h"
+    #include <Arduino.h>
+    #include "settings.h"
+
+    Settings settings;
+
+    #ifdef BUZZER
+        #include "buzzer_ctl.h"
+    #endif
+    
+#endif

src/hardware.cpp

@@ -24,10 +24,6 @@ void unlockDoor(bool silent) {
   #ifdef LEDCTL_PIN
     digitalWrite(LEDCTL_PIN,LOW);
   #endif
-
-  #ifdef WEB_SERIAL_DEBUG 
-    WebSerial.println("door unlocked");
-  #endif
 }
 
 void lockDoor() { 
@@ -45,10 +41,6 @@ void lockDoor() {
     #ifdef LEDCTL_PIN
       digitalWrite(LEDCTL_PIN,HIGH);
     #endif
-
-    #ifdef WEB_SERIAL_DEBUG 
-      WebSerial.println("door locked");
-    #endif
 }
 
 

src/main.cpp

@@ -9,14 +9,72 @@ unsigned int  maxReaderWaitTime = 9000; // Variable to timeout reader after too
 
 void commandLockDoor() {
   // Add code to lock the door here (e.g., activate a relay, if applicable)
-  Serial.println("DOOR_STATUS: locked");
+  ;
+  if (!settings.DoorDisabled()) { 
+    lockDoor();
+  } else {
+    Serial.println("LOG_MSG=Door Disabled Ignoring Command");
+  }
+  Serial.println("DOOR_LOCK_STATUS=" + stateDoor() );
 }
 
 void commandUnlockDoor() {
   // Add code to unlock the door here (e.g., deactivate a relay, if applicable)
-  Serial.println("DOOR_STATUS: unlocked");
+  if (!settings.DoorDisabled()) { 
+    unlockDoor(false);
+    delay(RELAY_DELAY); 
+    lockDoor();
+  } else {
+    Serial.println("LOG_MSG=Door Disabled Ignoring Command");
+  }
+  Serial.println("DOOR_LOCK_STATUS=" + stateDoor());
 }
 
+void commandToggleDoor() {
+  // Add code to lock the door here (e.g., activate a relay, if applicable)
+  ;
+  if (!settings.DoorDisabled()) { 
+    toggleDoor();
+    delay(RELAY_DELAY); 
+  } else {
+    Serial.println("LOG_MSG=Door Disabled Ignoring Command");
+  }
+  Serial.println("DOOR_LOCK_STATUS=" + stateDoor() );
+}
+
+
+
+void commandLockStateDoor() {
+  // Add code to get door state
+  Serial.println("DOOR_LOCK_STATUS=" + stateDoor());
+}
+
+void commandDisableDoor() {
+  // Add code to get door state
+  settings.setDisableDoor(1);
+  unlockDoor(1);
+  Serial.println("DOOR_DISABLED_STATUS=" + String(settings.DoorDisabled()));
+}
+
+void commandEnableDoor() {
+  // Add code to get door state
+  settings.setDisableDoor(0);
+  lockDoor();
+  Serial.println("DOOR_DISABLED_STATUS=" + String(settings.DoorDisabled()));
+}
+
+void commandDisabledState() {
+  // Add code to get door state
+  settings.setDisableDoor(0);
+  unlockDoor(true);
+  Serial.println("DOOR_DISABLED_STATUS=" + String(settings.DoorDisabled()));
+}
+
+
+
+
+
+
 void handleInterrupt(int bitValue) {
   static unsigned long lastInterruptTime = 0;
   unsigned long interruptTime = micros();
@@ -45,7 +103,7 @@ void handleData1Interrupt() {
 void setup() {
 
   Serial.begin(9600);
-
+  settings.loadFromEEPROM();
   
   pinMode(DATA0_PIN, INPUT_PULLUP);
   pinMode(DATA1_PIN, INPUT_PULLUP);
@@ -62,8 +120,16 @@ void setup() {
   attachInterrupt(digitalPinToInterrupt(DATA1_PIN), handleData1Interrupt, FALLING);
 
   #ifdef RELAY1
-    Serial.println("Enabling Relay: Locking Door");
+    if (!settings.DoorDisabled()) { 
+      Serial.println("LOG_MSG=Door Enabled");
+      Serial.println("LOG_MSG=Locking Door");
       lockDoor();
+    } else {
+      Serial.println("LOG_MSG=Door Disabled");
+      Serial.println("LOG_MSG=Unlocking Door");
+      unlockDoor(true);
+    }
+
   #endif
 
   #ifdef RELAY2
@@ -93,25 +159,26 @@ void loop() {
     uint64_t cardID = (cardData >> 1) & 0xFFFF;
 
     #ifdef DEBUG
-      Serial.print("Facility ID (Decimal): ");
+      Serial.print("DEBUG_MSG=Facility ID (Decimal): ");
       Serial.println(facilityID);
-      Serial.print("Facility ID (Binary): ");
+      Serial.print("DEBUG_MSG=Facility ID (Binary): ");
       Serial.println(facilityID, BIN);
 
-      Serial.print("Card ID (Decimal): ");
+      Serial.print("DEBUG_MSG=Card ID (Decimal): ");
       Serial.println(cardID);
-      Serial.print("Card ID (Binary): ");
+      Serial.print("DEBUG_MSG=Card ID (Binary): ");
       Serial.println(cardID, BIN);
 
-      Serial.print("Card Data (Binary): ");
+      Serial.print("DEBUG_MSG=Card Data (Binary): ");
       Serial.println(cardData, BIN);
-      Serial.print("Total Bits Received: ");
+      Serial.print("DEBUG_MSG=Total Bits Received: ");
       Serial.println(bitCount);
     #endif
 
     String fullCardID = String(facilityID)+":"+String(cardID);
-    Serial.print("FULL_CARD_ID: ");
-    Serial.println(fullCardID);
+    Serial.println("FULL_CARD_ID=" + fullCardID);
+
+    Serial.println(settings.DoorDisabled() ? "DOOR_DISABLED_STATUS=1" : "DOOR_DISABLED_STATUS=0");
 
 
     cardData = 0; // Reset the card data
@@ -126,8 +193,6 @@ void loop() {
 
   }
 
-
-
   // Check for commands from the serial interface
   if (Serial.available() > 0) {
     String command = Serial.readString();
@@ -137,6 +202,16 @@ void loop() {
       commandUnlockDoor();
     } else if (command.equals("lock")) {
       commandLockDoor();
+    } else if (command.equals("toggle")) {
+      commandToggleDoor();
+    } else if (command.equals("lock_status")) {
+      commandLockStateDoor();
+    } else if (command.equals("enable")) {
+      commandEnableDoor();
+    } else if (command.equals("disable")) {
+      commandDisableDoor();
+    }else if (command.equals("disabled_status")) {
+      commandDisabledState();
     }
   }