This allows to operate on MBR even if disk also has GPT.
function old new delta
.rodata 107019 107074 +55
packed_usage 36009 36034 +25
get_boot 1513 1532 +19
fdisk_main 4618 4622 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 103/0) Total: 103 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I was working with some very small ext4 filesystems, used for
overlaying on immutable VM/container images. If it's only desired to
overlay a single config file, these filesystems can be very small
indeed, and so ran afoul of this length check.
Since 4fc5ec56f ("device matching against UUIDs: do not try
floppies") (from 2009), floppy drives are skipped before this function
is even called. Reading from an unused loop device returns 0, so it
should be fine to reduce the minimum length.
Signed-off-by: Alyssa Ross via busybox <busybox@busybox.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The first login entry is ignored if a log file contains more than one
entry. To fix it, do not break the while loop if the offset is zero.
Signed-off-by: Dmitry Klochkov <dmitry.klochkov@bell-sw.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Specifying a PID of 0 for the -p option of chrt would previously result
in a "number 0... not in range" error. Now, it means instead that the
calling process (i.e. chrt itself) should be operated on; this is to be
consistent with the behavior of util-linux's version of chrt.
function old new delta
chrt_main 462 474 +12
Signed-off-by: Zuo An <zuoan.penguin@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Just listing the vendor/product IDs is not always very helpful, so add logic
to print the manufacturer and product strings similar to the "big" usbutils
versions.
Not all devices provide sensible strings though. The usbutils version works
around this by falling back to looking up the vendor/product IDs in the hwdb
and using those strings instead, which is not an option here - Instead
simply trim() the strings for readability.
lsusb | sort
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:5539 Realtek Semiconductor Corp. Integrated_Webcam_HD
Bus 001 Device 003: ID 0a5c:5842 Broadcom Corp. 58200
Bus 001 Device 030: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 0bda:5487 Realtek Semiconductor Corp. Dell dock
Bus 006 Device 003: ID 0bda:5413 Realtek Semiconductor Corp. Dell dock
Bus 006 Device 004: ID 413c:b06e Dell Computer Corp. Dell dock
Bus 006 Device 005: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 006 Device 006: ID 0bda:402e Realtek Semiconductor Corp. USB Audio
Bus 006 Device 007: ID 413c:1010 Dell Computer Corp. USB 2.0 Hub [MTT]
Bus 006 Device 008: ID 413c:b06f Dell Computer Corp. Dell dock
Bus 006 Device 009: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 010: ID 413c:2110 Dell Computer Corp. Dell Wired Multimedia Keyboard
Bus 006 Device 011: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 006 Device 012: ID 0451:3410 Texas Instruments, Inc. TUSB3410 Microcontroller
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 002: ID 0bda:0487 Realtek Semiconductor Corp. Dell dock
Bus 007 Device 003: ID 0bda:0413 Realtek Semiconductor Corp. Dell dock
Bus 007 Device 004: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
./busybox lsusb | sort
Bus 001 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 001 Device 002: ID 0bda:5539 CNFHH53Q0324300ACA10 Integrated_Webcam_HD
Bus 001 Device 003: ID 0a5c:5842 Broadcom Corp 58200
Bus 001 Device 030: ID 8087:0aaa
Bus 002 Device 001: ID 1d6b:0003 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 003 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 004 Device 001: ID 1d6b:0003 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 005 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 dummy_hcd Dummy host controller
Bus 006 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 006 Device 002: ID 0bda:5487 Dell Inc. Dell dock
Bus 006 Device 003: ID 0bda:5413 Dell Inc. Dell dock
Bus 006 Device 004: ID 413c:b06e Dell dock
Bus 006 Device 005: ID 0451:8142
Bus 006 Device 006: ID 0bda:402e Generic USB Audio
Bus 006 Device 007: ID 413c:1010 USB 2.0 Hub [MTT]
Bus 006 Device 008: ID 413c:b06f Dell dock
Bus 006 Device 009: ID 046d:c016 Logitech Optical USB Mouse
Bus 006 Device 010: ID 413c:2110 Dell Dell Wired Multimedia Keyboard
Bus 006 Device 011: ID 0451:8142
Bus 006 Device 012: ID 0451:3410 Texas Instruments TUSB3410 Boot Device
Bus 007 Device 001: ID 1d6b:0003 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 007 Device 002: ID 0bda:0487 Dell Inc. Dell dock
Bus 007 Device 003: ID 0bda:0413 Dell Inc. Dell dock
Bus 007 Device 004: ID 0bda:8153 Realtek USB 10/100/1000 LAN
./scripts/bloat-o-meter busybox_unstripped{_orig,}
function old new delta
trim - 101 +101
fileAction 338 431 +93
add_sysfs_prop - 70 +70
open_read_close - 54 +54
read_close - 35 +35
.rodata 3268 3294 +26
------------------------------------------------------------------------------
(add/remove: 5/0 grow/shrink: 2/0 up/down: 379/0) Total: 379 bytes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In kernel 5.16 special ioctls were introduced to get/set RTC parameters.
Add option to get/set parameters into busybox version of hwclock.
Implementation is similar to the one already used in linux-utils hwclock
tool.
Example of parameter get use:
$ hwclock -g 2
The RTC parameter 0x2 is set to 0x2.
$ hwclock --param-get bsm
The RTC parameter 0x2 is set to 0x2.
Example of parameter set use:
$ hwclock -p 2=1
The RTC parameter 0x2 will be set to 0x1.
$ hwclock -p bsm=2
The RTC parameter 0x2 will be set to 0x2.
function old new delta
hwclock_main 298 576 +278
.rodata 105231 105400 +169
packed_usage 34541 34576 +35
static.hwclock_longopts 60 84 +24
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 506/0) Total: 506 bytes
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Various tools are Linuxish and should thus only attempted to build on
Linux only. Some features are also Linux-only.
Also, libresolv is used on all GNU platforms, notably GNU/Hurd and
GNU/kfreeBSD.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Only in case the FEATURE_FBSET_FANCY configuration is enabled.
function old new delta
fbset_main 733 766 +33
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Not all options are actually implemented. In this case, return a message
and an error code to make it clear that the requested command has not
been executed.
function old new delta
.rodata 105200 105224 +24
fbset_main 747 733 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 24/-14) Total: 10 bytes
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
