mirror of
https://github.com/BelfrySCAD/BOSL2.git
synced 2025-01-01 09:49:45 +00:00
443 lines
No EOL
22 KiB
OpenSCAD
443 lines
No EOL
22 KiB
OpenSCAD
//////////////////////////////////////////////////////////////////////
|
|
// LibFile: bottlecaps_custom.scad
|
|
// Bottle caps, necks, and threaded adapters for plastic bottles.
|
|
// Includes:
|
|
// include <BOSL2/std.scad>
|
|
// include <BOSL2/bottlecaps_custom.scad>
|
|
//////////////////////////////////////////////////////////////////////
|
|
|
|
include <BOSL2/threading.scad>
|
|
include <BOSL2/knurling.scad>
|
|
|
|
// Module: custom_neck()
|
|
// Usage:
|
|
// custom_neck(<wall>, )
|
|
// Description:
|
|
// Creates a bottle neck given specifications.
|
|
// Arguments:
|
|
// wall = Wall thickness in mm.
|
|
// ---
|
|
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
|
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
|
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
|
// neckDiam = Outer diameter of neck without threads
|
|
// innerDiam = Inner diameter of neck
|
|
// threadOuterD = Outer diameter of thread
|
|
// height = Height of neck above support
|
|
// supportDiam = Outer diameter of support ring. Set to 0 for no support.
|
|
// threadPitch = Thread pitch
|
|
// roundLowerSupport = True to round the lower edge of the support ring
|
|
// wall = distance between ID and any wall that may be below the support
|
|
// Extra Anchors:
|
|
// "support-ring" = Centered at the bottom of the support ring.
|
|
// Example:
|
|
// custom_neck();
|
|
module custom_neck(anchor = "support-ring", spin = 0, orient = UP, neckDiam = 25, innerDiam = 21.4, threadOuterD = 27.2, height = 17, supportDiam = 33.0, threadPitch = 3.2, roundLowerSupport = false, wall)
|
|
{
|
|
inner_d = innerDiam;
|
|
neck_d = neckDiam;
|
|
support_d = max(neckDiam, supportDiam);
|
|
thread_pitch = threadPitch;
|
|
thread_angle = 15;
|
|
thread_od = threadOuterD;
|
|
|
|
diamMagMult = neckDiam / 26.19;
|
|
heightMagMult = height / 17.00;
|
|
|
|
sup_r = 0.30 * (heightMagMult > 1 ? heightMagMult : 1);
|
|
support_r = floor(((support_d == neck_d) ? sup_r : min(sup_r, (support_d - neck_d) / 2)) * 5000) / 10000;
|
|
support_rad = (wall == undef || !roundLowerSupport) ? support_r : min(support_r, floor((support_d - (inner_d + 2 * wall)) * 5000) / 10000); //Too small of a radius will cause errors with the arc, this limits granularity to .0001mm
|
|
support_width = 1 * (heightMagMult > 1 ? heightMagMult : 1) * sign(supportDiam);
|
|
roundover = 0.58 * diamMagMult;
|
|
lip_roundover_r = (roundover > (neck_d - inner_d) / 2) ? 0 : roundover;
|
|
h = height + support_width;
|
|
threadbase_d = neck_d - 0.8 * diamMagMult;
|
|
|
|
$fn = segs(33 / 2);
|
|
thread_h = (thread_od - threadbase_d) / 2;
|
|
anchors = [
|
|
anchorpt("support-ring", [0, 0, 0 - h / 2])
|
|
];
|
|
attachable(anchor, spin, orient, d1 = neck_d, d2 = 0, l = h, anchors = anchors) {
|
|
down(h / 2) {
|
|
rotate_extrude(convexity = 10) {
|
|
polygon(turtle(
|
|
state = [inner_d / 2, 0], (support_d != neck_d) ? [
|
|
"untilx", support_d / 2 - ((roundLowerSupport) ? support_rad : 0),
|
|
"arcleft", ((roundLowerSupport) ? support_rad : 0), 90,
|
|
"untily", support_width - support_rad,
|
|
"arcleft", support_rad, 90,
|
|
"untilx", neck_d / 2,
|
|
"right", 90,
|
|
"untily", h - lip_roundover_r,
|
|
"arcleft", lip_roundover_r, 90,
|
|
"untilx", inner_d / 2
|
|
] : [
|
|
"untilx", support_d / 2 - ((roundLowerSupport) ? support_rad : 0),
|
|
"arcleft", ((roundLowerSupport) ? support_rad : 0), 90,
|
|
"untily", h - lip_roundover_r,
|
|
"arcleft", lip_roundover_r, 90,
|
|
"untilx", inner_d / 2
|
|
]
|
|
));
|
|
}
|
|
up(h - threadPitch / 2 - lip_roundover_r) {
|
|
difference() {
|
|
thread_helix(
|
|
d = threadbase_d - 0.1 * diamMagMult,
|
|
pitch = thread_pitch,
|
|
thread_depth = thread_h + 0.1 * diamMagMult,
|
|
thread_angle = thread_angle,
|
|
twist = 360 * (height - threadPitch - lip_roundover_r) * .6167 / threadPitch,
|
|
higbee = thread_h * 2,
|
|
anchor = TOP
|
|
);
|
|
zrot_copies(rots = [90, 270]) {
|
|
zrot_copies(rots = [-28, 28], r = threadbase_d / 2) {
|
|
prismoid([20 * heightMagMult, 1.82 * diamMagMult], [20 * heightMagMult, 1.82 * diamMagMult * .6 + 2 * sin(29) * thread_h], h = thread_h + 0.1 * diamMagMult, anchor = BOT, orient = RIGHT);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
children();
|
|
}
|
|
}
|
|
|
|
function custom_neck(anchor = "support-ring", spin = 0, orient = UP, neckDiam = 25, innerDiam = 21.4, threadOuterD = 27.2, height = 17, supportDiam = 33.0, threadPitch = 3.2, roundLowerSupport = false, wall) =
|
|
no_function("custom_neck");
|
|
|
|
// Module: custom_cap()
|
|
// Usage:
|
|
// custom_cap(wall, [texture]);
|
|
// Description:
|
|
// Creates a basic threaded cap given specifications.
|
|
// Arguments:
|
|
// wall = Wall thickness in mm.
|
|
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
|
|
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
|
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
|
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
|
// height = Interior height of the cap in mm.
|
|
// threadOuterD = Outer diameter of the threads in mm.
|
|
// tolerance = Extra space to add to the outer diameter of threads and neck in mm. Applied to radius.
|
|
// neckOuterD = Outer diameter of neck in mm.
|
|
// threadAngle = Angle of taper on threads.
|
|
// threadPitch = Thread pitch in mm.
|
|
// Extra Anchors:
|
|
// "inside-top" = Centered on the inside top of the cap.
|
|
// Examples:
|
|
// custom_cap();
|
|
// custom_cap(texture="knurled");
|
|
// custom_cap(texture="ribbed");
|
|
module custom_cap(wall = 2, texture = "none", anchor = BOTTOM, spin = 0, orient = UP, height = 11.2, threadOuterD = 28.58, tolerance = .2, neckOuterD = 25.5, threadAngle = 15, threadPitch = 4)
|
|
{
|
|
$fn = segs(33 / 2);
|
|
threadOuterDTol = threadOuterD + 2 * tolerance;
|
|
w = threadOuterDTol + 2 * wall;
|
|
h = height + wall;
|
|
neckOuterDTol = neckOuterD + 2 * tolerance;
|
|
threadDepth = (threadOuterD - neckOuterD) / 2 + .8;
|
|
|
|
diamMagMult = (w > 32.58) ? w / 32.58 : 1;
|
|
heightMagMult = (height > 11.2) ? height / 11.2 : 1;
|
|
|
|
anchors = [
|
|
anchorpt("inside-top", [0, 0, -(h / 2 - wall)])
|
|
];
|
|
attachable(anchor, spin, orient, d = w, l = h, anchors = anchors) {
|
|
down(h / 2) {
|
|
difference() {
|
|
union() {//For the knurled and ribbed caps the PCO caps in BOSL2 cut into the wall thickness so the wall+texture are the specified wall thickness. That seems wrong so this does specified thickness+texture
|
|
if (texture == "knurled") {
|
|
knurled_cylinder(d = w + 1.5 * diamMagMult, helix = 45, l = h, anchor = BOTTOM);
|
|
cyl(d = w, l = h, anchor = BOTTOM);
|
|
} else if (texture == "ribbed") {
|
|
zrot_copies(n = 30, r = (w + .2 * diamMagMult) / 2) {
|
|
cube([1 * diamMagMult, 1 * diamMagMult, h], anchor = BOTTOM);
|
|
}
|
|
cyl(d = w, l = h, anchor = BOTTOM);
|
|
} else {
|
|
cyl(d = w, l = h, anchor = BOTTOM);
|
|
}
|
|
}
|
|
up(wall) cyl(d = threadOuterDTol, h = h, anchor = BOTTOM);
|
|
}
|
|
difference(){
|
|
up(wall + threadPitch / 2) {
|
|
thread_helix(d = neckOuterDTol, pitch = threadPitch, thread_depth = threadDepth, thread_angle = threadAngle, twist = 360 * ((height - threadPitch) / threadPitch), higbee = threadDepth, internal = true, anchor = BOTTOM);
|
|
}
|
|
/*up(h*6){
|
|
cyl(d=w,h=h*10); //thread overflow cutoff, shouldn't be needed
|
|
}*/
|
|
}
|
|
}
|
|
children();
|
|
}
|
|
}
|
|
function custom_cap(wall = 2, texture = "none", anchor = BOTTOM, spin = 0, orient = UP, height = 11.2, threadOuterD = 28.58, tolerance = .2, neckOuterD = 25.5, threadAngle = 15, threadPitch = 4) =
|
|
no_function("custom_cap");
|
|
|
|
// Module: thread_adapter_NC()
|
|
// Usage:
|
|
// thread_adapter_NC(wall, [texture]);
|
|
// Description:
|
|
// Creates a threaded neck to cap adapter
|
|
// Arguments:
|
|
// wall = Thickness of wall between neck and cap when d=0. Leave undefined to have the outside of the tube go from the OD of the neck support ring to the OD of the cap. Default: undef
|
|
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
|
|
// capWall = Wall thickness of the cap in mm.
|
|
// capHeight = Interior height of the cap in mm.
|
|
// capThreadOD = Outer diameter of cap threads in mm.
|
|
// tolerance = Extra space to add to the outer diameter of threads and neck in mm. Applied to radius.
|
|
// capNeckOD = Inner diameter of the cap threads.
|
|
// capNeckID = Inner diameter of the hole through the cap.
|
|
// capThreadTaperAngle = Angle of taper on threads.
|
|
// capThreadPitch = Thread pitch in mm
|
|
// neckDiam = Outer diameter of neck w/o threads
|
|
// neckID = Inner diameter of neck
|
|
// neckThreadOD = 27.2
|
|
// neckHeight = Height of neck down to support ring
|
|
// neckThreadPitch = Thread pitch in mm.
|
|
// neckSupportOD = Outer diameter of neck support ring. Leave undefined to set equal to OD of cap. Set to 0 for no ring. Default: undef
|
|
// d = Distance between bottom of neck and top of cap
|
|
// taperLeadIn = Length to leave straight before tapering on tube between neck and cap if exists.
|
|
// Examples:
|
|
// thread_adapter_NC();
|
|
module thread_adapter_NC(wall, texture = "none", capWall = 2, capHeight = 11.2, capThreadOD = 28.58, tolerance = .2, capNeckOD = 25.5, capNeckID, capThreadTaperAngle = 15, capThreadPitch = 4, neckDiam = 25, neckID = 21.4, neckThreadOD = 27.2, neckHeight = 17, neckThreadPitch = 3.2, neckSupportOD, d = 0, taperLeadIn = 0){
|
|
neckSupportOD = (neckSupportOD == undef || (d == 0 && neckSupportOD < capThreadOD + 2 * tolerance)) ? capThreadOD + 2 * (capWall + tolerance) : neckSupportOD;
|
|
capNeckID = (capNeckID == undef) ? neckID : capNeckID;
|
|
wall = (wall == undef) ? neckSupportOD + neckDiam + capThreadOD + neckID : wall;
|
|
|
|
$fn = segs(33 / 2);
|
|
wallt1 = min(wall, (max(neckSupportOD, neckDiam) - neckID) / 2);
|
|
wallt2 = min(wall, (capThreadOD + 2 * (capWall + tolerance) - capNeckID) / 2);
|
|
|
|
difference(){
|
|
union(){
|
|
up(d / 2) {
|
|
custom_neck(neckDiam = neckDiam,
|
|
innerDiam = neckID,
|
|
threadOuterD = neckThreadOD,
|
|
height = neckHeight,
|
|
supportDiam = neckSupportOD,
|
|
threadPitch = neckThreadPitch,
|
|
roundLowerSupport = ((wallt1 < (neckSupportOD - neckID) / 2) && (d > 0 || neckSupportOD > (capThreadOD + 2 * (capWall + tolerance)))),
|
|
wall = (d > 0) ? wallt1 : min(wallt1, ((capThreadOD + 2 * (capWall + tolerance) - neckID) / 2))
|
|
);
|
|
}
|
|
if (d != 0) {
|
|
rotate_extrude(){
|
|
polygon(points = [
|
|
[0, d / 2],
|
|
[neckID / 2 + wallt1, d / 2],
|
|
[neckID / 2 + wallt1, d / 2 - taperLeadIn],
|
|
[capNeckID / 2 + wallt2, taperLeadIn - d / 2],
|
|
[capNeckID / 2 + wallt2, -d / 2],
|
|
[0, -d / 2]
|
|
]);
|
|
}
|
|
}
|
|
down(d / 2){
|
|
custom_cap(wall = capWall,
|
|
texture = texture,
|
|
height = capHeight,
|
|
threadOuterD = capThreadOD,
|
|
tolerance = tolerance,
|
|
neckOuterD = capNeckOD,
|
|
threadAngle = capThreadTaperAngle,
|
|
orient = DOWN,
|
|
threadPitch = capThreadPitch
|
|
);
|
|
}
|
|
}
|
|
rotate_extrude() {
|
|
polygon(points = [
|
|
[0, d / 2],
|
|
[neckID / 2, d / 2],
|
|
[neckID / 2, d / 2 - taperLeadIn],
|
|
[capNeckID / 2, taperLeadIn - d / 2],
|
|
[capNeckID / 2, -d / 2 - capWall],
|
|
[0, -d / 2 - capWall]
|
|
]);
|
|
}
|
|
}
|
|
}
|
|
function thread_adapter_NC(wall, texture = "none", capWall = 2, capHeight = 11.2, capThreadOD = 28.58, tolerance = .2, capNeckOD = 25.5, capNeckId, capThreadTaperAngle = 15, capThreadPitch = 4, neckDiam = 25, neckID = 21.4, neckThreadOD = 7.2, neckHeight = 17, neckThreadPitch = 3.2, neckSupportOD, d = 0, taperLeadIn = 0) =
|
|
no_fuction("thread_adapter_NC");
|
|
|
|
// Module: thread_adapter_CC()
|
|
// Usage:
|
|
// thread_adapter_CC(wall, [texture]);
|
|
// Description:
|
|
// Creates a threaded cap to cap adapter.
|
|
// Arguments:
|
|
// wall = Wall thickness in mm.
|
|
// texture = The surface texture of the cap. Valid values are "none", "knurled", or "ribbed". Default: "none"
|
|
// capHeight1 = Interior height of top cap.
|
|
// capThreadOD1 = Outer diameter of threads on top cap.
|
|
// tolerance = Extra space to add to the outer diameter of threads and neck in mm. Applied to radius.
|
|
// capNeckOD1 = Inner diameter of threads on top cap.
|
|
// capThreadPitch1 = Thread pitch of top cap in mm.
|
|
// capHeight2 = Interior height of bottom cap. Leave undefined to duplicate capHeight1.
|
|
// capThreadOD2 = Outer diameter of threads on bottom cap. Leave undefined to duplicate capThread1.
|
|
// capNeckOD2 = Inner diameter of threads on top cap. Leave undefined to duplicate capNeckOD1.
|
|
// capThreadPitch2 = Thread pitch of bottom cap in mm. Leave undefinced to duplicate capThreadPitch1.
|
|
// d = Distance between caps.
|
|
// neckID1 = Inner diameter of cutout in top cap.
|
|
// neckID2 = Inner diameter of cutout in bottom cap.
|
|
// Leave one of the neckIDs undefined to duplicate the other or leave both undefined to leave the caps solid.
|
|
// taperLeadIn = Length to leave straight before tapering on tube between caps if exists.
|
|
// Examples:
|
|
// thread_adapter_CC();
|
|
module thread_adapter_CC(wall = 2, texture = "none", capHeight1 = 11.2, capThreadOD1 = 28.58, tolerance = .2, capNeckOD1 = 25.5, capThreadPitch1 = 4, capHeight2, capThreadOD2, capNeckOD2, capThreadPitch2, d = 0, neckID1, neckID2, taperLeadIn = 0){
|
|
capHeight2 = (capHeight2 == undef) ? capHeight1 : capHeight2;
|
|
capThreadOD2 = (capThreadOD2 == undef) ? capThreadOD1 : capThreadOD2;
|
|
capNeckOD2 = (capNeckOD2 == undef) ? capNeckOD1 : capNeckOD2;
|
|
capThreadPitch2 = (capThreadPitch2 == undef) ? capThreadPitch1 : capThreadPitch2;
|
|
neckID2 = (neckID2 == undef && neckID1 != undef) ? neckID1 : neckID2;
|
|
taperLeadIn = (d >= taperLeadIn * 2) ? taperLeadIn : d / 2;
|
|
|
|
|
|
$fn = segs(33 / 2);
|
|
|
|
difference(){
|
|
union(){
|
|
up(d / 2){
|
|
custom_cap(orient = UP, wall = wall, texture = texture, height = capHeight1, threadOuterD = capThreadOD1, tolerance = tolerance, neckOuterD = capNeckOD1, threadPitch = capThreadPitch1);
|
|
}
|
|
if (d != 0) {
|
|
rotate_extrude() {
|
|
polygon(points = [
|
|
[0, d / 2],
|
|
[capThreadOD1 / 2 + (wall + tolerance), d / 2],
|
|
[capThreadOD1 / 2 + (wall + tolerance), d / 2 - taperLeadIn],
|
|
[capThreadOD2 / 2 + (wall + tolerance), taperLeadIn - d / 2],
|
|
[capThreadOD2 / 2 + (wall + tolerance), -d / 2],
|
|
[0, -d / 2]
|
|
]);
|
|
}
|
|
}
|
|
down(d / 2){
|
|
custom_cap(orient = DOWN, wall = wall, texture = texture, height = capHeight2, threadOuterD = capThreadOD2, tolerance = tolerance, neckOuterD = capNeckOD2, threadPitch = capThreadPitch2);
|
|
}
|
|
}
|
|
if (neckID1 != undef || neckID2 != undef) {
|
|
neckID1 = (neckID1 == undef) ? neckID2 : neckID1;
|
|
neckID2 = (neckID2 == undef) ? neckID1 : neckID2;
|
|
|
|
rotate_extrude() {
|
|
polygon(points = [
|
|
[0, wall + d / 2],
|
|
[neckID1 / 2, wall + d / 2],
|
|
[neckID1 / 2, wall + d / 2 - taperLeadIn],
|
|
[neckID2 / 2, taperLeadIn - d / 2 - wall],
|
|
[neckID2 / 2, -d / 2 - wall],
|
|
[0, -d / 2 - wall]
|
|
]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
function thread_adapter_CC(wall = 2, texture = "none", capHeight1 = 11.2, capThreadOD1 = 28.58, tolerance = .2, capNeckOD1 = 25.5, capThreadPitch1 = 4, capHeight2, capThreadOD2, capNeckOD2, capThreadPitch2, d = 0, neckID1, neckID2, taperLeadIn = 0) =
|
|
no_function("thread_adapter_CC");
|
|
|
|
// Module: thread_adapter_NN()
|
|
// Usage:
|
|
// thread_adapter_NN();
|
|
// Description:
|
|
// Creates a threaded neck to neck adapter.
|
|
// Arguments:
|
|
// d = Distance between bottoms of necks
|
|
// neckOD1 = Outer diameter of top neck w/o threads
|
|
// neckID1 = Inner diameter of top neck
|
|
// threadOD1 = Outer diameter of threads on top neck
|
|
// height1 = Height of top neck above support ring.
|
|
// supportOD1 = Outer diameter of the support ring on the top neck. Set to 0 for no ring.
|
|
// threadPitch1 = Thread pitch of top neck.
|
|
// neckOD2 = Outer diameter of bottom neck w/o threads. Leave undefined to duplicate neckOD1
|
|
// neckID2 = Inner diameter of bottom neck. Leave undefined to duplicate neckID1
|
|
// threadOD2 = Outer diameter of threads on bottom neck. Leave undefined to duplicate threadOD1
|
|
// height2 = Height of bottom neck above support ring. Leave undefined to duplicate height1
|
|
// supportOD2 = Outer diameter of the support ring on bottom neck. Set to 0 for no ring. Leave undefined to duplicate supportOD1
|
|
// threadPitch2 = Thread pitch of bottom neck. Leave undefined to duplicate threadPitch1
|
|
// taperLeadIn = Length to leave straight before tapering on tube between necks if exists.
|
|
// wall = Thickness of tube wall between necks. Leave undefined to match outer diameters with the neckODs/supportODs.
|
|
// Examples:
|
|
// thread_adapter_NN();
|
|
module thread_adapter_NN(d = 0, neckOD1 = 25, neckID1 = 21.4, threadOD1 = 27.2, height1 = 17, supportOD1 = 33.0, threadPitch1 = 3.2, neckOD2, neckID2, threadOD2, height2, supportOD2, threadPitch2, taperLeadIn = 0, wall){
|
|
neckOD2 = (neckOD2 == undef) ? neckOD1 : neckOD2;
|
|
neckID2 = (neckID2 == undef) ? neckID1 : neckID2;
|
|
threadOD2 = (threadOD2 == undef) ? threadOD1 : threadOD2;
|
|
height2 = (height2 == undef) ? height1 : height2;
|
|
supportOD2 = (supportOD2 == undef) ? supportOD1 : supportOD2;
|
|
threadPitch2 = (threadPitch2 == undef) ? threadPitch1 : threadPitch2;
|
|
wall = (wall == undef) ? supportOD1 + supportOD2 + neckID1 + neckID2 : wall;
|
|
|
|
supprtOD2 = (d == 0 && supportOD2 != 0) ? max(neckOD1, supportOD2) : supportOD2;
|
|
supprtOD1 = (d == 0 && supportOD1 != 0) ? max(neckOD2, supportOD1) : supportOD1;
|
|
|
|
$fn = segs(33 / 2);
|
|
wallt1 = min(wall, (max(supprtOD1, neckOD1) - neckID1) / 2);
|
|
wallt2 = min(wall, (max(supprtOD2, neckOD2) - neckID2) / 2);
|
|
|
|
taperLeadIn = (d >= taperLeadIn * 2) ? taperLeadIn : d / 2;
|
|
|
|
difference(){
|
|
union(){
|
|
up(d / 2){
|
|
custom_neck(orient = UP,
|
|
neckDiam = neckOD1,
|
|
innerDiam = neckID1,
|
|
threadOuterD = threadOD1,
|
|
height = height1,
|
|
supportDiam = supprtOD1,
|
|
threadPitch = threadPitch1,
|
|
roundLowerSupport = ((wallt1 < (supprtOD1 - neckID1) / 2) || (supportOD1 > max(neckOD2, supportOD2) && d == 0)),
|
|
wall = (d > 0) ? wallt1 : min(wallt1, ((max(neckOD2, supportOD2)) - neckID1) / 2)
|
|
);
|
|
}
|
|
if (d != 0) {
|
|
rotate_extrude() {
|
|
polygon(points = [
|
|
[0, d / 2],
|
|
[neckID1 / 2 + wallt1, d / 2],
|
|
[neckID1 / 2 + wallt1, d / 2 - taperLeadIn],
|
|
[neckID2 / 2 + wallt2, taperLeadIn - d / 2],
|
|
[neckID2 / 2 + wallt2, -d / 2],
|
|
[0, -d / 2]
|
|
]);
|
|
}
|
|
}
|
|
down(d / 2){
|
|
custom_neck(orient = DOWN,
|
|
neckDiam = neckOD2,
|
|
innerDiam = neckID2,
|
|
threadOuterD = threadOD2,
|
|
height = height2,
|
|
supportDiam = supprtOD2,
|
|
threadPitch = threadPitch2,
|
|
roundLowerSupport = ((wallt2 < (supprtOD2 - neckID2) / 2) || (supportOD2 > max(neckOD1, supportOD1) && d == 0)),
|
|
wall = (d > 0) ? wallt2 : min(wallt2, ((max(neckOD1, supportOD1)) - neckID2) / 2)
|
|
);
|
|
}
|
|
}
|
|
if (neckID1 != undef || neckID2 != undef) {
|
|
neckID1 = (neckID1 == undef) ? neckID2 : neckID1;
|
|
neckID2 = (neckID2 == undef) ? neckID1 : neckID2;
|
|
|
|
rotate_extrude() {
|
|
polygon(points = [
|
|
[0, d / 2],
|
|
[neckID1 / 2, d / 2],
|
|
[neckID1 / 2, d / 2 - taperLeadIn],
|
|
[neckID2 / 2, taperLeadIn - d / 2],
|
|
[neckID2 / 2, -d / 2],
|
|
[0, -d / 2]
|
|
]);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
function thread_adapter_NN(d = 0, neckOD1 = 25, neckID1 = 21.4, threadOD1 = 27.2, height1 = 17, supportOD1 = 33.0, threadPitch1 = 3.2, neckOD2, neckID2, threadOD2, height2, supportOD2, threadPitch2, taperLeadIn = 0, wall) =
|
|
no_fuction("thread_adapter_NN"); |