58 lines
2.2 KiB
Markdown
58 lines
2.2 KiB
Markdown
# Business Card Linux
|
|
|
|
[](https://github.com/thirtythreeforty/businesscard-linux/actions)
|
|
|
|
This is the Linux distribution small enough to run from the 8MB of storage on my Linux-powered business card.
|
|
It is powered by the Allwinner F1C100s, a $1.40 Linux-capable ARM system-on-chip.
|
|
This repository is the source code for its firmware image, based on Buildroot 2019.05.
|
|
This directory is a "Buildroot external," providing a few patches, additional packages, and board support files on top of mainline Buildroot.
|
|
|
|
For a complete write-up, see my [blog post][blog-post] about the project.
|
|
|
|
|
|
|
|
## Patched Linux and U-Boot
|
|
|
|
I lightly patched the Linux kernel and U-Boot to get all the hardware peripherals working.
|
|
You can find my forks here:
|
|
|
|
- [Linux][linux-f1c100s] v5.0.2 (patched to enable USB gadget mode)
|
|
- [U-Boot][uboot-f1c100s] (patched to support the F1C100s)
|
|
|
|
## Build
|
|
|
|
Make sure submodules are initialized:
|
|
|
|
git submodule update --init
|
|
|
|
Change to the top-level Buildroot directory:
|
|
|
|
cd buildroot
|
|
|
|
Initialize the configuration, including the defconfig and this external directory:
|
|
|
|
make BR2_EXTERNAL=$PWD/../ thirtythreeforty_businesscard_defconfig
|
|
|
|
And compile:
|
|
|
|
make
|
|
|
|
This may take a couple hours to do from scratch, depending on the speed of your machine.
|
|
|
|
## Installation
|
|
|
|
If you have a [Lichee Pi Nano][lichee-nano] with a flash chip, or one of my blank business cards, you can flash it with the following command.
|
|
Make sure the board is in FEL mode using `dmesg` or similar.
|
|
|
|
output/host/bin/sunxi-fel -p spiflash-write 0 output/images/flash.bin
|
|
|
|
You can erase the card after it boots by simply logging in (as `root`) and erasing the flash manually:
|
|
|
|
dd if=/dev/zero of=/dev/mtd0
|
|
|
|
Don't erase it unless you're prepared to burn a new image!
|
|
|
|
[blog-post]: https://www.thirtythreeforty.net/posts/2019/12/my-business-card-runs-linux/
|
|
[linux-f1c100s]: https://github.com/thirtythreeforty/linux.git
|
|
[uboot-f1c100s]: https://github.com/thirtythreeforty/u-boot.git
|
|
[lichee-nano]: https://www.seeedstudio.com/Sipeed-Lichee-Nano-Linux-Development-Board-16M-Flash-WiFi-Version-p-2893.html
|